Capo (musical device)

For other uses, see Capo (musical device) (disambiguation).

A basic guitar capo

A capo (short for capotasto, Italian for "head of fretboard") is a device used for shortening the strings, and hence raising the pitch, of a stringed instrument such as a guitar, mandolin or banjo. It was invented by the Flamenco guitarist Jose Patino Gonzalez.

There are several different styles of capo available, utilizing a range of mechanisms, but most use a rubber-covered bar to hold down the strings, fastened with a strip of elastic or nylon, a cam-operated metal clamp, or another device. Alternative terms are capo d'astro and capodastro, also Italian. Many people use a kind called the Kyser quick-change. This is common because you can pull it off fast.

A simple version can be made with a pencil and a rubber band. Lay the pencil across the strings at the desired fret, and holding it in place by wrapping the rubber band around both ends and underneath the fretboard. [A pencil with flat surfaces works much better than a round one].

Explanation

Capos are used to change the key and pitch of a guitar sound without having to adjust the strings with the tuning keys. It should be noted that the capo is placed as close to the fret as possible.

With 12-string guitars a capo used to be necessary to play in tune with a six-string because manufacturers would strongly recommend that the instrument not be tuned above a tone below standard guitar tuning to reduce stresses on the neck. Modern 12-strings can be tuned up to pitch with ultra light gauge strings, but many players still prefer to tune a tone lower and use a capo to play in tune with six-string or bass guitars.

A Shubb capo which uses a lever operated over-centre locking action clamp

Because of the different techniques and chord voicings available in different keys, the same piece may sound very different played in D or played in C with a capo at the second fret (at the same actual pitch). Additionally, the timbre of the strings changes as the scale length is shortened, suggesting other short-scaled stringed instruments such as the mandolin. Therefore the use of a capo is as much a matter of artistic expression as of technical expediency.

The use of a capo also obviates the need to learn a song in several different keys if accompanying singers sing at different pitches.

For guitar playing, some styles such as flamenco and British/American folk music make extensive use of the capo, while it is used very rarely, if at all, in other styles such as classical and jazz playing.

Variations in the design of capos allow a range of advantages to players. A capo with two rollers, one over the neck and one under, facilitates quick key changes in the middle of tunes or sets. This is a particular advantage in playing Irish music on the guitar, as it enables the player to move quickly between keys without sacrificing drone strings. Clamp-style capos fitted from the side of the neck (as distinct from those which encircle it) can be placed so as to leave one or two strings open. This gives some of the advantages of variant tunings (such as a capoed dropped D), without requiring a change in fingering of chords above the capo. Capos with fine adjustment of the clamping force have the advantage of being less likely to upset the tuning of the instrument. As well as the Shubb capo, the newer G7th capo design has this feature and is simply squeezed to provide the required clamping force.

One of the more radical developments in capo design in recent years is the partial capo made by the Third Hand Capo Company. This model allows each string to be stopped individually, and can be used in conjunction with other capos, either of the same type or of conventional design. In theory this puts a vast number of variant tunings at the player's disposal. In practice it is most often placed either on the 2nd fret of the 3rd, 4th and 5th strings (producing the effect of DADGAD tuning raised two semitones), or on the 2nd fret of the 2nd, 3rd and 4th strings (open A major). Again, this requires no change of fingering above the capo. A little experimentation with the two methods of producing variant tunings (partial capo or actual retuning) will show that each has its own advantages.

Guitarist Dominic Frasca uses unusual single string "mini capos" attached by drilling through the neck of his customized 10-string guitar.

The five-string banjo, with its short fifth string, poses a particular problem for using the capo. For many years now it has been possible to buy a specialised fifth-string capo, consisting of a narrow metal strip fixed to the side of the neck of the instrument, with a sliding stopper for the string.

External links

• The Sterner Online Capo Museum
• Julie Waters' Partial Capos w/photos and Descriptions Page