M240 machine gun: Difference between revisions

M240
M240
	M240B
Type	Machine gun
Place of origin	Belgium
Service history
In service	1977—
Used by	Military of the United States Israeli Defense Forces
Specifications
Mass	12.5 kg (27.6 lb)
Length	1,245 mm (49 in)
Barrel length	627 mm (24.68 in)
Cartridge	7.62 × 51 mm NATO
Action	Gas-operated, open bolt
Rate of fire	650–950 rounds/min
Muzzle velocity	905 m/s (2,970 ft/s)
Effective firing range	900 m (tracer burnout),; 1,800 m (1,970 yards) on tripod
Maximum firing range	3,725 m (4,073 yards)
Feed system	100- or 200-round disintegrating belt

Browse history interactively

← Previous edit Next edit →

Content deleted Content added

VisualWikitext

Inline

Revision as of 19:29, 10 September 2007

The M240, formally United States Machine Gun, 7.62mm, M240, is a family of belt-fed medium machine guns firing the 7.62 × 51 mm NATO cartridge (w/ M13 Link). It is a version of the Belgian FN MAG (Mitrailleuse d`Appui Général, "General Purpose Machine Gun") machine gun for the US army.

The M240 has been used by the United States armed forces since the late 1970s. It is used extensively by infantry, as well as ground vehicles, watercraft, and aircraft. Despite not being the lightest medium machine gun in service, the M240 is highly regarded for reliability, and its standardization among NATO members is also seen as a major advantage.

All variants of the M240 series are fed from disintegrating belts, and are capable of firing most types of 7.62 mm NATO ammunition. They all share the same basic internal parts, which are also interchangeable, for the most part, with other members of the FN MAG family. There are significant differences in weight and some features among some versions for which this does not apply. The M240 is manufactured by the American division of FN Herstal, a Belgian company with historically deep ties to U.S. arms procurement.

The M240B and M240G (see Variants section) are usually fired from a bipod, the M122A1 tripod, or other types of mounts.

History and design

Manufactured by Fabrique Nationale's subsidiary FN Manufacturing, Inc. Columbia, SC, the FN MAG derivative M240 was chosen by the U.S. military for different roles after large world-wide searches and competitions. It has mainly replaced the M60 in most roles, though it replaced some other machine guns in the co-axial position. M60s have remained in use, but they are being slowly phased out and replaced by the newer M240s as they wear out.

The M240 is a belt-fed, gas-operated, air-cooled, crew-served, fixed Headspace weapon. It is compatible only with the M13 Link system, also used by many other western (especially NATO) machine gun designs. Its functionality is demonstrated by its ability to be mounted on the M122A1 tripod, a bipod, on vehicles, or on aircraft. The M60 is still used as a door gun on Army helicopters, however.

It was first adopted in 1977 by the U.S. Army as a co-axial tank gun, and slowly adopted for more applications in 1980s and 1990s. The M240 and M240E1 were adopted for use on vehicles. This led to further adoption in more uses, especially for the Army and Marine infantry. While possessing many of the same basic characteristics as its predecessor, the durability of the M240 system results in superior reliability when compared to the M60. The M240 actually has a more complex gas system than M60s, but can function better with lower maintenance with higher reliabilty, though this comes at greater cost and weight.

Compared to other machine guns, its rating of 26,000 Mean Rounds Between Failure (MRBF) is quite high for its weight- in the 1970s when it was first adopted it achieved about 7000 MRBF. It is not as reliable as some very heavy older designs, but it is for its mass.

They are both (M60/M240) scheduled to be replaced by a lightweight machine gun (JSSAP/PMSW), which will also replace some of the M249 Squad Automatic Weapons. Among the likely candidates is another FN product, SOCOM's latest 7.62 mm machine gun — the M249-derived Mk 48 Mod 0 —, scheduled for fielding starting in 2006 with U.S. Navy special operations units in conjunction with whom it was developed.

Early history: testing and adoption

A sailor of NMCB-74 (Naval Mobile Construction Battalion) fires an M240B mounted atop a Humvee in 2004

The adoption of the M240 has its origins in the late 1960s/early 1970s as a project to procure a new co-axially mounted 7.62 mm machine gun for tanks to replace the M73 and M219 machine guns then being used in this role. It would go on to be deployed in this role in the 1980s, but spawn its adoption for the infantry and other mountings as well. It would be deployed in this, and some other roles into the 1990s and 2000s.

As mentioned, during the 1970s the Army was looking for new 7.62 mm machine guns for vehicle/AFV mounts. The 1950s-era M73 had been rather troubled, and the M73E1/M219 it was developed into was not much of an improvement. A number of designs of the period from various countries were considered, but it was narrowed down to the M60E2 and the FN MAG. They underwent a large testing, including the older M219 as well.

Two main criteria analyzed were "Mean Rounds Between Stoppages" (MRBS, jams that can be cleared within minutes) and "Mean Rounds Between Failures" (MRBF, such as a parts breaking). The results for the evaluated machine guns were the following:

Type	Round Fired	MRBS	MRBF
FN MAG 58	50,000	2,962	6,442
M60E2	50,000	846	1,669
M219	19,000	215	1,090
Minimum specified		850	2,675
Minimum desired		1,750	5,500

The test applies only to the 70s-era versions tested. The M240 itself underwent some improvements and the M60E2 was a specialized co-axial variant that differed from some of the other types. The qualities of the M60 variants vary considerably, such as between the M60E4 and the M60C. That aside, for these types the clear winner was the MAG, which was designated as the M240 in 1977 after the Army competition. It went on to replace many older types for the vehicle/co-axial role in the 1980s. The M240 proved popular enough that it would be adapted by the infantry later on, spawning the M240B and M240G. It was adopted for this role in 1991 by the USMC, replacing the rather worn M60s used by infantry, but also the M60E3 that the Marines had started using in the 1980s. The M240 would be adopted in the late 1990s by the Army for infantry, beating out the M60E4, which though lighter and cheaper did not offer commonality with the vehicle borne M240, other NATO FN MAG users such as Britain, or the USMC.

The various versions of the M240 never entirely replaced all the M60 versions, though it did for most main applications and roles.

Variants

File:CSA-2006-10-20-101059.jpg

A M240B in the hands of a U.S. Army 4th Infantry Division Soldier in Iraq, September 2006

The NATO version of the M240 is known as the MAG 58, in the UK it is known as the L7 General Purpose Machine Gun. The U.S.-made M240 family is produced under the same specifications as the MAG 58, enabling all M240 variants to have interchangeable/interoperable components with foreign-produced NATO equivalent weapons. This has significant advantages in training, logistics support, tactical versatility, and joint operations. For example, an M240B's buttstock and bipod may be carried in a vehicle to enable the crew to convert the coaxial weapon to an infantry model in the event that they are forced to withdraw from an inoperable vehicle. This is referred to as an "egress kit" by the manufacturer.

M240

This was adopted in 1977 by the Army to replace the M73 and M219 7.62 mm machine guns, and the M85 .50 cal. In the 1980s, the Marines adopted the M240 and M240E1 for use on vehicles like the LAV-25.

M240E4/M240B

The M240B is the standard infantry medium Machine gun of the U.S. Army and is the version in use by the U.S. Air Force. It comes configured for ground combat. It is almost always referred to as an "M240 Bravo" or even a "240 Bravo" verbally, but always written as M240B.

The M60E4 (Mk 43 as designated by the U.S. Navy) was pitted against the (then called) M240E4 in Army trials during the 1990s for a new infantry medium machine gun, in a competition to replace the decades-old M60s. The M240E4 won, and was then classified as the M240B. This led to 1000 existing M240 being sent to FN for an overhaul and a special kit that modified them for use on ground (such as a stock, a rail, etc). This led to procurement contracts in the late 1990s for all-new M240B. However, a new feature was added, a hydraulic buffer system to reduce the felt recoil as incorporated in the M60. While the M240B had been more reliable in the tests, it was a few pounds heavier than the M60E4, and there is program underway for a new lightweight medium machine gun in the early 2000s. The Army M240 converted to the M240B configuration should not be confused with the large numbers of M240/E1 converted to the M240G configuration for the Marine Corps.

M240C

The M240C is a variation on the original co-axial M240, but with a right-handed feed.

Marines with a tripod-mounted M240G at Camp Hansen, Okinawa.

M240E1 and M240D

The M240D has two possible configurations: aircraft and egress (ground). The aircraft configured M240D has a front and rear sight and a trigger group which accommodates the spade grip device. The ground configuration involves the installation of an Egress Package or "infantry modification kit" which is designed to provide downed aircrew personnel with increased fire power. The M240D is an upgrade of the M240E1, primarily in the addition of an optical rail on the receiver cover. The M240E1 had also fitted with spade grips for flexible use.

M240G

A similar version of the M240, the M240G (referred to as the "240 Golf"), is the standard U.S. Marine Corps medium machine gun. The Marine Corps has replaced the M60E3 with the M240G. The M240 allows for commonality throughout the Marine Corps whether the weapon is used in an infantry, vehicular, or airborne role. The M240G is the ground version of the original M240 or M240E1, 7.62 mm medium class weapon designed as a coaxial/pintle mounted machine gun for Tanks and LAVs. The M240G can be modified for ground use by the installation of an "infantry modification kit," (a flash suppressor, front sight, carrying handle for the barrel, a buttstock, infantry length pistol grip, bipod, and rear sight assembly). The 240G lacks a front heat guard, and is few pounds lighter at 25.6 pounds, than the M240B.

M240H ramp mount on a Army CH-47 Chinook.

M240E5/M240H

An improvement of the M240D, the M240H (sometimes referred to as the "240 Hotel") features a rail equipped feed cover, an improved flash suppressor, and has been configured so that it can be more quickly converted to infantry standard using an Egress Kit.

M240E6

The M240E6, currently in testing, is a lighter-weight model that features a titanium receiver block.

Operation

Loading the weapon is performed by pulling the charging handle which locks the bolt to the rear. The weapon is placed on safe and the charging handle is pushed forward (this is spring loaded on the tank mounted version). The feed tray cover is then lifted and rounds are laid inside the feed tray. The feed tray cover is then closed and the weapon is ready for operation.

Clearing the weapon is performed by ensuring the bolt is locked to the rear and the weapon is on safe. The feed tray cover is then lifted, the remaining belt (if any) is swept out of the feed tray, the feed tray is lifted to visually inspect the rear of the barrel and the face of the bolt. Any links or brass casings are removed. The weapon is now clear. In the unlikely event that a live round is on the bolt face, it is knocked loose with a cleaning rod or another rigid object. If there is a live round lodged in the barrel, the operator must immediately decide if the barrel is hot enough that there is a chance of it cooking off. If there is, he will immediately move his face away from the opening of the weapon. He should then wait for the barrel to cool off before attempting to remove it. In many cases, attempting to remove the barrel will cause the round to detonate as soon as the barrel is unlocked from the receiver. He can also attempt to extract the round by taking the weapon off of safe, pulling the trigger and pulling back on the charging handle. This has a fair chance of causing the weapon to fire, so care should be made in ensuring that the weapon is pointed in a safe direction first.

The rate of fire may be controlled by three different settings. The first setting allows the weapon to cycle at 750 round/min. The two remaining settings increase the rate of fire by 100 round/min per setting — second setting being 850 round/min and third setting, 950 round/min). These settings are changed by dismounting the barrel, removing the gas regulator collar and turning the gas regulator to allow more or less gas to move through the weapon system. It is generally performed before missions, as changing the setting is distracting at best under field or combat conditions.

The barrels can be exchanged rapidly, thanks to a barrel release button located on the left side of the weapon. The weapon is cleared first and then the button is held down, while the barrel's carrying handle is moved from the right side of the weapon to the center, unlocking it from the receiver. At this point, the button is released and the barrel is then pulled free of the receiver and placed to the side. The new barrel is inserted into the receiver and then the carrying handle is shifted to the right, locking it into place.

During prolonged firing, care must be taken to not allow exposed skin to come in contact with the weapon. The barrels can become hot enough to inflict second degree burns instantly without becoming visibly different. However, such barrels glow brightly to anyone using any sort of optics sensitive to infrared radiation, such as night vision devices.

Lessons learned report

An April 2002 presentation by the Natick Soldier Center reported on lessons learned from M240B use in Afghanistan (such as used during Operation Anaconda):

M240B Machine Gun Lessons Learned^{[citation needed]}

17% reported engaging the enemy with their M240B;
42% reported problems getting spare parts in Afghanistan (barrels, springs, small roll pins, T&E pin, heat shields, sear pins, spare barrel bag, cleaning materials);
1 soldier reported a double feed in combat;
50% reported that they need better ways to carry ammunition (ammo bag, etc);
100% were confident in their weapon;
82% felt that their M240B was reliable;
Suggestions: improved sling, lighter, more durable tripod, more durable heat shield.

External links

@@ Line 95: / Line 95: @@
 ==Variants==
-[[Image:M240_Coax_on_USMC_LAV.jpg|thumb|300px|Marine performs maintenance on an M240E1 machine gun, mounted on a LAV during an exercise, 1998.]]
+[[Image:M240_Coax_on_USMC_LAV.jpg|thumb|300px|Marine performs maintenance on an M240 coax machine gun, mounted on a LAV during an exercise, 1998.]]
 [[Image:CSA-2006-10-20-101059.jpg|thumb|300px|Image:CSA-2006-10-20-101059.jpg|A M240B in the hands of a U.S. Army [[4th Infantry Division (United States)|4th Infantry Division]] Soldier in Iraq, September 2006]]