Crosscut saw: Difference between revisions
TutterMouse (talk | contribs) m Reverted edits by 79.188.157.6 (talk) to last revision by TutterMouse (HG) |
|||
Line 60: | Line 60: | ||
Crosscut saws are used with a variety of other small hand tools. [[Wedge (mechanical device)|Wedges]] are usually used to keep the sections of the log being cut in place as the saw is worked through the rest of the log. Wedges are placed to keep the sections apart but ''tie wedges'' may also be applied across the cut to hold sections together until the sawyer is ready for the sections to roll or drop out of the way. |
Crosscut saws are used with a variety of other small hand tools. [[Wedge (mechanical device)|Wedges]] are usually used to keep the sections of the log being cut in place as the saw is worked through the rest of the log. Wedges are placed to keep the sections apart but ''tie wedges'' may also be applied across the cut to hold sections together until the sawyer is ready for the sections to roll or drop out of the way. |
||
Also covered in typical training sessions is the safe use of the common ax. To keep the saw from cutting through rocks and dirt, the bark of the tree around the area to be cut is often removed with an ax. |
Also this is gay and everyone hates wood for any reason covered in typical training sessions is the safe use of the common ax. To keep the saw from cutting through rocks and dirt, the bark of the tree around the area to be cut is often removed with an ax. |
||
Crosscut saw training is mostly safety training with the mechanics of working safely with top bind, bottom bind, and radial (twisting) bind comprising much of the training required to work with such saws. The establishment of escape routes for both felling and bucking may require that both operators at either end of a double-handled saw be constantly aware of the environment around them, and constantly aware of other people within the immediate region which might enter in to the sphere of crosscut influence. |
Crosscut saw training is mostly safety training with the mechanics of working safely with top bind, bottom bind, and radial (twisting) bind comprising much of the training required to work with such saws. The establishment of escape routes for both felling and bucking may require that both operators at either end of a double-handled saw be constantly aware of the environment around them, and constantly aware of other people within the immediate region which might enter in to the sphere of crosscut influence. |
Revision as of 19:48, 5 October 2010
![]() | The examples and perspective in this article may not represent a worldwide view of the subject. (March 2010) |
A crosscut saw is a saw that is specially designed for making crosscuts. A crosscut is a cut made horizontally through the trunk of a standing tree, but the term also applies to cutting free lumber.
Crosscut saws have teeth that are designed to cut wood at a right angle to the direction of the wood grain. The cutting edge of each tooth is angled back and has a beveled edge. This design allows each tooth to act like a knife edge and slice through the wood (in contrast to a rip saw, which tears along the grain, acting like a miniature chisel). Some crosscut saws use alternating patterns of the cutting teeth along with others, called "rakers", designed to scrape out the cut strips of wood. Cross saws have much smaller teeth than rip saws.
Some saws, such as Japanese saws and those used by the Ancient Egyptians, are designed to cut only on the pull stroke. Western saws, on the other hand, are designed and sharpened to cut on the push stroke.
Common features
Many crosscut saws have a wooden handle with return edge at right angles to the un-toothed edge of the saw blade, allowing the saw to serve as a square for marking material to be cut at a right angle.
"Crosscut saw" is a blanket term that includes smaller traditional carpentry saws and larger saws used for forestry and logging work, including both bucking and felling saws. A bucking saw generally has a straighter back and less of a pronounced curve on its cutting surface. Since bucking saws are more often used on trees that are already downed, the greater stiffness and weight aids swift cutting, and allows two-man saws to also be used by one person, pushing as well as pulling.
A felling saw is generally less stiff than a bucking saw and the backside, as well as the cutting side, is usually curved inward. Felling saws are more often used to cut down standing trees, so the thinner, lighter design is easier to use without gravity holding the blade against the cut. The concave back of the saw makes it easier to place wedges, preventing the kerf from closing on the saw.[1]
How crosscut saws cut
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/39/Crosscut_saw_tooth_patterns.jpg/300px-Crosscut_saw_tooth_patterns.jpg)
As described above, saws will have cutters, rakers, and gullets. As the saw is pulled toward the operator, the cutters along the saw's surface scores the wood to the left and right of the width of the blade, cutting a channel downward into the wood. In many saws there are four cutters, one which cuts left, another which cuts right, then another pair of left and right cutters.
After the cutters there is generally a raker followed by a gullet. A raker is what does the actual removal of the wood that is being cut. The raker follows the cutters, scraping the bottom of the kerf. As the raker scrapes the bottom of the kerf, the wood is peeled back and stored in the gullet which follows the raker.
As the saw is drawn out of the kerf, the wood that has accumulated in the gullets is allowed to fall out onto the ground. A way to determine whether a saw is working well is to examine the noodle shaped strings of wood that are scraped out of the kerf; the presence of fairly long strings indicate that the side cutters are doing their job and that the raker is slicing out the wood cleanly.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/3/3b/Five-foot_crosscut_saw.jpg/300px-Five-foot_crosscut_saw.jpg)
Benefits of crosscut saws
Crosscut saws are much safer to use than gasoline powered chainsaws. When backpacking equipment into the forest, crosscut saws require less weight to be carried in on people's backs, and less maintenance is required for crosscut saws than for chainsaws.
In many areas gasoline powered saws aren't permitted, either because the area has been designated as a Wilderness Area or because fire restrictions or other restrictions are in effect.
Depending upon the skill of the operator and the types and width of the wood being cut, crosscut saws can be faster to use than chainsaws.
One of the reasons why crosscut saws are safer to use than chainsaws is that crosscut saws don't continue to cut after they're dropped. Another reason is that using a crosscut saw requires more time to size up the situation and think about the lay of the land and the direction in which bucked log sections might fall or travel than is taken by a typical chain sawyer, who usually likes to move quickly from downfall to downfall.
History
Crosscut saws have been in use around the world since historic times, with the design of the saws (the cutting surfaces, the bow and shape of the saw, and the handles) changing over time to accommodate differences in the types of trees being cut, changes in metallurgy technology, and the application of experience. Records exist of crosscut saws in use during the Roman Empire although not widely [citation needed]. They came into wide usage in Europe in the middle of the 15th century. Early saws had a plain tooth pattern until the M tooth pattern was developed in 15th century south Germany. Prior to about 1880 crosscut saws were primarily used for bucking, with axes used to fell trees. Starting in Pennsylvania about 1880, loggers began using the saws for felling trees as well. Despite the modern chainsaw, they are still in wide use around the world, not only in competition matches against chainsaws but also in regular, real-life usage since they afford certain advantages over gasoline-powered saws.
Vintage Saws vs. Modern Saws
There are two types of crosscut saw classification, vintage and modern. Vintage saws are saws that can be anywhere from 30 to as much as 250 years old and are much sought after by professionals, and as such are typically very much more expensive than modern crosscut saws. Modern saws are typically stamped out of sheet metal and are manufactured from contemporary alloys which behave much differently than vintage saws which have historically been made by craftsmen who understood the nuances of the saws they produced.
In September 2005, the United States Forest Service conducted field trials of vintage saws against modern saws, details of which can be found in the external link reference provided below. One significant finding in the background research findings is that vintage saws are becoming increasingly difficult to locate owing to the demand for such saws by professionals.
Overall, modern saws have some advantages over vintage saws such as stiffness which is useful for felling but might cause difficulties when bucking downed trunks which have bind. Vintage saws which bend easily and can, in fact, be folded end-to-end for carrying on one's back, afford easier transport than most modern saws, and afford less-binding cuts that aren't straight.
Professional sawers will utilize both classes of saw in a variety of field situations and will acquire experience to be able to predict which class of saw and, indeed, what tooth pattern to use for a paricular environment.
Crosscut saw training
![](http://upload.wikimedia.org/wikipedia/en/thumb/f/f9/FredricRiceCSTraining.jpg/270px-FredricRiceCSTraining.jpg)
Many areas of the National Forests of the United States are designated as Wilderness Areas and as such the use of mechanized and motorized equipment is prohibited except by special circumstance. Because of this, the United States Forest Service (USFS) organizes the crosscut saw training of USFS employees and forest working volunteers in an effort to maintain skills and proficiency among those who need to use such saws.
Training within the Angeles National Forest concentrates greatly upon the safety of the USFS employees and forest volunteers, the safety of animals in the area, and the safety of the surrounding environment.
Training also includes an examination of the differences and benefits of vintage saws and modern saws created with modern materials. Vintage saws are those saws which were manufactured over fifty years ago, being made of high carbon steel instead of the exotic alloys which are typical of contemporary saws.
Crosscut saws are used with a variety of other small hand tools. Wedges are usually used to keep the sections of the log being cut in place as the saw is worked through the rest of the log. Wedges are placed to keep the sections apart but tie wedges may also be applied across the cut to hold sections together until the sawyer is ready for the sections to roll or drop out of the way.
Also this is gay and everyone hates wood for any reason covered in typical training sessions is the safe use of the common ax. To keep the saw from cutting through rocks and dirt, the bark of the tree around the area to be cut is often removed with an ax.
Crosscut saw training is mostly safety training with the mechanics of working safely with top bind, bottom bind, and radial (twisting) bind comprising much of the training required to work with such saws. The establishment of escape routes for both felling and bucking may require that both operators at either end of a double-handled saw be constantly aware of the environment around them, and constantly aware of other people within the immediate region which might enter in to the sphere of crosscut influence.
Traditionally over the past 250 years the use of crosscut saws in the many forests of the United States lacked the use of safety clothing and equipment however safety training in contemporary usage in the United States dictates the mandatory use of gloves, eye protectors, boots with hard tops and high-top ankle protectors, and possible ear protectors, kevlar chaps, and long sleeved shirts.
Crosscut saws are used within Designated Wildernesses where chainsaws are banned due to the prohibited use of petrolium-based tools and equipment, requiring that crosscut training also include the proper use of non-petroilum based lubricants as well as training in techniques which leave a minimal impact both ecologically as well as visually after trails are cleared of downed trees.
See also
References
- Miller, Warren. Crosscut Saw Manual. USDA Forest Service, 1978, published by the U.S. Government Printing Office. Revised edition December 2003.
- Michael, David E. Saws That Sing, A Guide To Using Crosscut Saws. USDA Forest Service, December 2004, published by the U.S. Government Printing Office 64 pages.
External links
- Crosscut Saw Training which took place in the Angeles National Forest on July 25, 2007. Numerous photographs and a description of crosscut saw training is offered.
- Short video of axe being used as an underbuck. The flexibility of the axe handle makes this a preferred method of single underbucking.
- Vintage Crosscut saws
- Field Testing of vintage saws against modern saws