Dilution ratio: Difference between revisions
specify the two names explicitly |
|||
| Line 15: | Line 15: | ||
V_{\rm solvent} &= V_{\rm total} - V_{\rm solute} |
V_{\rm solvent} &= V_{\rm total} - V_{\rm solute} |
||
\end{align}</math> |
\end{align}</math> |
||
where {{math|''V''<sub>total</sub>}} is the desired total volume, and {{mvar|F}} is the desired dilution factor number (the number in the position of {{mvar|F}} if expressed as "{{math|1 |
where {{math|''V''<sub>total</sub>}} is the desired total volume, and {{mvar|F}} is the desired dilution factor number (the number in the position of {{mvar|F}} if expressed as "{{math|1/''F''}} ''dilution factor''" or "{{mvar|xF}} ''dilution''"). |
||
However, some solutions and mixtures take up slightly less volume than their components. |
However, some solutions and mixtures take up slightly less volume than their components. |
||
Latest revision as of 18:21, 22 November 2023
 | This article needs additional citations for verification. (December 2015) |
In chemistry and biology, the dilution ratio and dilution factor are two related (but slightly different) expressions of the change in concentration of a liquid substance when mixing it with another liquid substance. They are often used for simple dilutions, one in which a unit volume of a liquid material of interest is combined with an appropriate volume of a solvent liquid to achieve the desired concentration. The diluted material must be thoroughly mixed to achieve the true dilution.
For example, in a solution with a 1:5 dilution ratio, entails combining 1 unit volume of solute (the material to be diluted) with 5 unit volumes of the solvent to give 6 total units of total volume.
In photographic development, dilutions are normally given in a '1+x' format. For example '1+49' would typically mean 1 part concentrate and 49 parts water, meaning a 500ml solution would require 10ml concentrate and 490ml water.
Dilution factor
[edit]The "dilution factor" is an expression which describes the ratio of the aliquot volume to the final volume. Dilution factor is a notation often used in commercial assays. For example, in solution with a 1/5 dilution factor (which may be abbreviated as x5 dilution), entails combining 1 unit volume of solute (the material to be diluted) with (approximately) 4 unit volumes of the solvent to give 5 units of total volume. The following formulas can be used to calculate the volumes of solute (Vsolute) and solvent (Vsolvent) to be used:[1] where Vtotal is the desired total volume, and F is the desired dilution factor number (the number in the position of F if expressed as "1/F dilution factor" or "xF dilution"). However, some solutions and mixtures take up slightly less volume than their components.
![{\displaystyle {\begin{aligned}V_{\rm {solute}}&={\frac {V_{\rm {total}}}{F}}\\[4pt]V_{\rm {solvent}}&=V_{\rm {total}}-V_{\rm {solute}}\end{aligned}}}](https://wikimedia.org/api/rest_v1/media/math/render/svg/46ef52121ad32f7ed39dbb7eb9ebcf8487d2b2fc)
In other areas of science such as pharmacy, and in non-scientific usage, a dilution is normally given as a plain ratio of solvent to solute. For large factors, this confusion makes only a minor difference, but in precise work it can be important to make clear whether dilution ratio or dilution factor is intended.
References
[edit]- ^ Dr. Walker. "Dilutions" (PDF). Weber State University. Retrieved 2023-05-06.