Jump to content

Bell test: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
No edit summary
Loggerjack (talk | contribs)
Line 5: Line 5:


==Conduct of optical Bell test experiments==
==Conduct of optical Bell test experiments==
In practice most actual experiments have used light, assumed to be emitted in the form of particle-like photons (produced by [[atomic cascade]] or [[spontaneous parametric down conversion]]), rather than the atoms that Bell originally had in mind. The property of interest is, in the best known experiments, the [[polarisation]] direction, though other properties can be used.
In practice most actual experiments have used light, assumed to be emitted in the form of particle-like photons (produced by [[atomic cascade]] or [[spontaneous parametric down conversion]]), rather than the atoms that Bell originally had in mind. The property of interest is, in the best known experiments, the [[polarisation (waves)|polarisation]] direction, though other properties can be used.
===A typical CHSH (two-channel) experiment===
===A typical CHSH (two-channel) experiment===
[[File:Two channel.png|300px|thumb|right|'''Scheme of a "two-channel" Bell test'''<br>The source S produces pairs of "photons", sent in opposite directions. Each photon encounters a two-channel polariser whose orientation can be set by the experimenter. Emerging signals from each channel are detected and coincidences counted by the coincidence monitor CM.]]
[[File:Two channel.png|300px|thumb|right|'''Scheme of a "two-channel" Bell test'''<br>The source S produces pairs of "photons", sent in opposite directions. Each photon encounters a two-channel polariser whose orientation can be set by the experimenter. Emerging signals from each channel are detected and coincidences counted by the coincidence monitor CM.]]

Revision as of 20:24, 30 January 2012

The Bell test experiments or Bell's inequality experiments serve to investigate the validity of the entanglement effect in quantum mechanics by using some kind of Bell inequality. John Bell published the first inequality of this kind in his paper "On the Einstein-Podolsky-Rosen Paradox".[1] Bell's Theorem states that a Bell inequality must be obeyed under any local hidden variable theory but can in certain circumstances be violated under quantum mechanics. The term "Bell inequality" can mean any one of a number of inequalities — in practice, in real experiments, the CHSH or CH74 inequality, not the original one derived by John Bell. It places restrictions on the statistical results of experiments on sets of particles that have taken part in an interaction and then separated. A Bell test experiment is one designed to test whether or not the real world obeys a Bell inequality. Such experiments fall into two classes, depending on whether the analysers used have one or two output channels. Nevertheless a loophole-free test has not been performed yet.

Conduct of optical Bell test experiments

In practice most actual experiments have used light, assumed to be emitted in the form of particle-like photons (produced by atomic cascade or spontaneous parametric down conversion), rather than the atoms that Bell originally had in mind. The property of interest is, in the best known experiments, the polarisation direction, though other properties can be used.

A typical CHSH (two-channel) experiment

Scheme of a "two-channel" Bell test
The source S produces pairs of "photons", sent in opposite directions. Each photon encounters a two-channel polariser whose orientation can be set by the experimenter. Emerging signals from each channel are detected and coincidences counted by the coincidence monitor CM.

The diagram shows a typical optical experiment of the two-channel kind for which Alain Aspect set a precedent in 1982 (Aspect, 1982a). Coincidences (simultaneous detections) are recorded, the results being categorised as '++', '+−', '−+' or '−−' and corresponding counts accumulated.

Four separate subexperiments are conducted, corresponding to the four terms E(a, b) in the test statistic S ((2) below). The settings a, a′, b and b′ are generally in practice chosen to be 0, 45°, 22.5° and 67.5° respectively — the "Bell test angles" — these being the ones for which the quantum mechanical formula gives the greatest violation of the inequality.

For each selected value of a and b, the numbers of coincidences in each category (N++, N--, N+- and N-+) are recorded. The experimental estimate for E(a, b) is then calculated as:

(1)        E = (N++ + N--N+-N-+)/(N++ + N-- + N+- + N-+).

Once all four E’s have been estimated, an experimental estimate of the test statistic

(2)       S = E(a, b) − E(a, b′) + E(a′, b) + E(ab′)

can be found. If S is numerically greater than 2 it has infringed the CHSH inequality. The experiment is declared to have supported the QM prediction and ruled out all local hidden variable theories.

A strong assumption has had to be made, however, to justify use of expression (2). It has been assumed that the sample of detected pairs is representative of the pairs emitted by the source. That this assumption may not be true comprises the fair sampling loophole.

The derivation of the inequality is given in the CHSH Bell test page.

A typical CH74 (single-channel) experiment

File:Single-channel Bell test.png
Setup for a "single-channel" Bell test
The source S produces pairs of "photons", sent in opposite directions. Each photon encounters a single channel (e.g. "pile of plates") polariser whose orientation can be set by the experimenter. Emerging signals are detected and coincidences counted by the coincidence monitor CM.

Prior to 1982 all actual Bell tests used "single-channel" polarisers and variations on an inequality designed for this setup. The latter is described in Clauser, Horne, Shimony and Holt's much-cited 1969 article (Clauser, 1969) as being the one suitable for practical use. As with the CHSH test, there are four subexperiments in which each polariser takes one of two possible settings, but in addition there are other subexperiments in which one or other polariser or both are absent. Counts are taken as before and used to estimate the test statistic.

(3)       S = (N(a, b) − N(a, b′) + N(a′, b) + N(a′, b′) − N(a′, ∞) − N(∞, b)) / N(∞, ∞),

where the symbol ∞ indicates absence of a polariser.

If S exceeds 0 then the experiment is declared to have infringed Bell's inequality and hence to have "refuted local realism".

The only theoretical assumption (other than Bell's basic ones of the existence of local hidden variables) that has been made in deriving (3) is that when a polariser is inserted the probability of detection of any given photon is never increased: there is "no enhancement". The derivation of this inequality is given in the page on Clauser and Horne's 1974 Bell test.

Experimental assumptions

In addition to the theoretical assumptions made, there are practical ones. There may, for example, be a number of "accidental coincidences" in addition to those of interest. It is assumed that no bias is introduced by subtracting their estimated number before calculating S, but that this is true is not considered by some to be obvious. There may be synchronisation problems — ambiguity in recognising pairs due to the fact that in practice they will not be detected at exactly the same time.

Nevertheless, despite all these deficiencies of the actual experiments, one striking fact emerges: the results are, to a very good approximation, what quantum mechanics predicts. If imperfect experiments give us such excellent overlap with quantum predictions, most working quantum physicists would agree with John Bell in expecting that, when a perfect Bell test is done, the Bell inequalities will still be violated. This attitude has led to the emergence of a new sub-field of physics which is now known as quantum information theory. One of the main achievements of this new branch of physics is showing that violation of Bell's inequalities leads to the possibility of a secure information transfer, which utilizes the so-called quantum cryptography (involving entangled states of pairs of particles).

Notable experiments

Over the past thirty or so years, a great number of Bell test experiments have now been conducted. These experiments are subject to assumptions, in particular the ‘no enhancement’ hypothesis of Clauser and Horne (above). The experiments are commonly interpreted to rule out local hidden variable theories, but they could also be said to demonstrate ‘signal enhancement’, which relates to the stochastic resonance phenomenon (Two classes of Bell inequalities). Advancements in technology have led to significant improvement in efficiencies, as well as a greater variety of methods to test the Bell Theorem.

Some of the best known:

Freedman and Clauser, 1972

This was the first actual Bell test, using Freedman's inequality, a variant on the CH74 inequality.

Aspect, 1981-2

Alain Aspect and his team at Orsay, Paris, conducted three Bell tests using calcium cascade sources. The first and last used the CH74 inequality. The second was the first application of the CHSH inequality. The third (and most famous) was arranged such that the choice between the two settings on each side was made during the flight of the photons (as originally suggested by John Bell).

Tittel and the Geneva group, 1998

The Geneva 1998 Bell test experiments showed that distance did not destroy the "entanglement". Light was sent in fibre optic cables over distances of several kilometers before it was analysed. As with almost all Bell tests since about 1985, a "parametric down-conversion" (PDC) source was used.

Weihs' experiment under "strict Einstein locality" conditions

In 1998 Gregor Weihs and a team at Innsbruck, led by Anton Zeilinger, conducted an ingenious experiment that closed the "locality" loophole, improving on Aspect's of 1982. The choice of detector was made using a quantum process to ensure that it was random. This test violated the CHSH inequality by over 30 standard deviations, the coincidence curves agreeing with those predicted by quantum theory.

Pan et al.'s experiment on the GHZ state

This is the first of new Bell-type experiments on more than two particles; this one uses the so-called GHZ state of three particles; it is reported in Nature (2000)

Rowe et al. (2001) are the first to close the detection loophole

The detection loophole was first closed in an experiment with two entangled trapped ions, carried out in the ion storage group of David Wineland at the National Institute of Standards and Technology in Boulder. The experiment had detection efficiencies well over 90%.[2]

Gröblacher et al. (2007) test of Leggett-type non-local realist theories

A specific class of non-local theories suggested by Anthony Leggett is ruled out. Based on this, the authors conclude that any possible non-local hidden variable theory consistent with quantum mechanics must be highly counterintuitive.[3][4]

Salart et al. (2008) Separation in a Bell Test

This experiment filled a loophole by providing an 18 km separation between detectors, which is sufficient to allow the completion of the quantum state measurements before any information could have traveled between the two detectors.[5][6]

Ansmann et al. (2009) Overcoming the detection loophole in solid state

This experiment surmounted the detection loophole using a pair of superconducting qubits in an entangled state. However, the experiment still suffered from the locality loophole because the qubits were only separated by a few millimeters.

Loopholes

Though the series of increasingly sophisticated Bell test experiments has convinced the physics community in general that local realism is untenable, there are still critics who point out that the outcome of every single experiment done so far that violates a Bell inequality can, at least theoretically, be explained by faults in the experimental setup, experimental procedure or that the equipment used does not behave as well as it is supposed to. These possibilities are known as "loopholes". The most serious loophole is the detection loophole, which means that particles are not always detected in both wings of the experiment. It is possible to "engineer" quantum correlations (the experimental result) by letting detection be dependent on a combination of local hidden variables and detector setting. Experimenters have repeatedly stated that loophole-free tests can be expected in the near future (García-Patrón, 2004). On the other hand, some researchers point out that it is a logical possibility that quantum physics itself prevents a loophole-free test from ever being implemented (Gill, 2003; Santos, 2006).

Notes

  1. ^ J.S. Bell, Physics 1, 195-200 (1964).
  2. ^ Rowe, MA; Kielpinski, D; Meyer, V; Sackett, CA; Itano, WM; Monroe, C; Wineland, DJ. 2001. Experimental violation of a Bell's inequality with efficient detection. NATURE 409 (6822): 791-794.
  3. ^ Quantum physics says goodbye to reality
  4. ^ An experimental test of non-local realism
  5. ^ Salart, D.; Baas, A.; van Houwelingen, J. A. W.; Gisin, N.; and Zbinden, H. “Spacelike Separation in a Bell Test Assuming Gravitationally Induced Collapses.” Physical Review Letters 100, 220404 (2008).
  6. ^ http://www.physorg.com/news132830327.html

References