Energy conversion efficiency: Difference between revisions

Content deleted Content added

Inline

Revision as of 15:26, 17 January 2016

Energy conversion efficiency (η) is the ratio between the useful output of an energy conversion machine and the input, in energy terms. The input, as well as the useful output may be electric power, mechanical work, light (radiation), or heat.^[1]

Overview

Energy conversion efficiency is not defined uniquely, but instead depends on the usefulness of the output. All or part of the heat produced from burning a fuel may become rejected waste heat if, for example, work is the desired output from a thermodynamic cycle. Energy converter is an example of an energy transformation. For example a light bulb falls into the categories energy converter. $\eta ={\frac {P_{\mathrm {out} }}{P_{\mathrm {in} }}}$ Even though the definition includes the notion of usefulness, efficiency is considered a technical or physical term. Goal or mission oriented terms include effectiveness and efficacy.

Generally, energy conversion efficiency is a dimensionless number between 0 and 1.0, or 0% to 100%. Efficiencies may not exceed 100%, e.g., for a perpetual motion machine. However, other effectiveness measures that can exceed 1.0 are used for heat pumps and other devices that move heat rather than convert it.

When talking about the efficiency of heat engines and power stations the convention should be stated, i.e., HHV (aka Gross Heating Value etc.) or LCV (aka Net Heating value), and whether gross output (at the generator terminals) or net output (at the power station fence) are being considered. The two are separate but both must be stated. Failure to do so causes endless confusion.

Related, more specific terms include

Electrical efficiency, useful power output per electrical power consumed;
Mechanical efficiency, where one form of mechanical energy (e.g. potential energy of water) is converted to mechanical energy (work);
Thermal efficiency or Fuel efficiency, useful heat and/or work output per input energy such as the fuel consumed;
'Total efficiency', e.g., for cogeneration, useful electric power and heat output per fuel energy consumed. Same as the thermal efficiency.
Luminous efficiency, that portion of the emitted electromagnetic radiation is usable for human vision.

Fuel heating values and efficiency

In Europe the usable energy content of fuel is typically calculated using the lower heating value (LHV) of that fuel, which definition assumes that the water vapor produced during fuel combustion (oxidation), remains gaseous, and is not condensed to liquid water so the latent heat of vaporization of that water is not usable. Using the LHV, a condensing boiler can achieve a "heating efficiency" in excess of 100% (this does not violate the first law of thermodynamics as long as the LHV convention is understood, but does cause confusion). This is because the apparatus recovers part of the heat of vaporization, which is not included in the definition of the lower heating value of fuel^{[citation needed]}. In the U.S. and elsewhere, the higher heating value (HHV) is used, which includes the latent heat for condensing the water vapor, and thus the thermodynamic maximum of 100% efficiency cannot be exceeded with HHV's use.

Example of energy conversion efficiency

Conversion process	Conversion type	Energy efficiency
Electricity generation
Gas turbine	Chemical to electrical	up to 40%
Gas turbine plus steam turbine (combined cycle)	Chemical/thermal to electrical	up to 60%
Water turbine	Gravitational to electrical	up to 90% (practically achieved)
Wind turbine	Kinetic to electrical	up to 59% (theoretical limit)
Solar cell	Radiative to electrical	6–40% (technology-dependent, 15-20% most often, 85–90% theoretical limit)
Fuel cell	Chemical to electrical	up to 85%
World Electricity generation 2008	Gross output 39%	Net output 33%^[2]
Engine/Motor
Combustion engine	Chemical to kinetic	10–50%^[3]
Electric motor	Electrical to kinetic	70–99.99% (> 200 W); 50–90% (10–200 W); 30–60% (< 10 W)
Natural process
Photosynthesis	Radiative to chemical	up to 6%^[4]
Muscle	Chemical to kinetic	14–27%
Appliance
Household refrigerator	Electrical to thermal	low-end systems ~ 20%; high-end systems ~ 40–50%
Incandescent light bulb	Electrical to radiative	0.7–5.1%,^[5] 5–10%^{[citation needed]}
Light-emitting diode (LED)	Electrical to radiative	4.2–53% ^[6]
Fluorescent lamp	Electrical to radiative	8.0–15.6%,^[5] 28%^[7]
Low-pressure sodium lamp	Electrical to radiative	15.0–29.0%,^[5] 40.5%^[7]
Metal-halide lamp	Electrical to radiative	9.5–17.0%,^[5] 24%^[7]
Switched-mode power supply	Electrical to electrical	currently up to 96% practically
Electric shower	Electrical to thermal	90–95% (multiply with the energy efficiency of electricity generation for comparison with other water-heating systems)
Electric heater	Electrical to thermal	~100% (essentially all energy is converted into heat, multiply with the energy efficiency of electricity generation for comparison with other heating systems)
Others
Firearm	Chemical to kinetic	~30% (.300 Hawk ammunition)
Electrolysis of water	Electrical to chemical	50–70% (80–94% theoretical maximum)

References

Cited

^ Bold text
^ IEC/OECD 2008 Energy Balance for World, accessdate 2011-06-08
^ "Motivations for Promoting Clean Diesels" (PDF). US Department Of Energy. 2006. Archived from the original (PDF) on October 7, 2008. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)
^ Miyamoto K. "Chapter 1 - Biological energy production". Renewable biological systems for alternative sustainable energy production (FAO Agricultural Services Bulletin - 128). Food and Agriculture Organization of the United Nations. Retrieved 2009-01-04. {{cite web}}: Cite has empty unknown parameter: |coauthors= (help)
^ ^a ^b ^c ^d Luminous efficacy#Lighting efficiency
^ "All in 1 LED Lighting Solutions Guide". PhilipsLumileds.com. Philips. 2012-10-04. p. 15. Archived from the original (PDF) on 2013-03-31. Retrieved 2015-11-18.
^ ^a ^b ^c Light Pollution Handbook. Springer. 2004.

General

External links

[1] Bold text

[2] IEC/OECD 2008 Energy Balance for World, accessdate 2011-06-08

[3] "Motivations for Promoting Clean Diesels" (PDF). US Department Of Energy. 2006. Archived from the original (PDF) on October 7, 2008. {{cite web}}: Unknown parameter |deadurl= ignored (|url-status= suggested) (help)

[urlChapter_1_-_Biological_energy_production-4] Miyamoto K. "Chapter 1 - Biological energy production". Renewable biological systems for alternative sustainable energy production (FAO Agricultural Services Bulletin - 128). Food and Agriculture Organization of the United Nations. Retrieved 2009-01-04. {{cite web}}: Cite has empty unknown parameter: |coauthors= (help)

[Lighting_efficiency-5] Luminous efficacy#Lighting efficiency

[6] "All in 1 LED Lighting Solutions Guide". PhilipsLumileds.com. Philips. 2012-10-04. p. 15. Archived from the original (PDF) on 2013-03-31. Retrieved 2015-11-18.

[books.google.com-7] Light Pollution Handbook. Springer. 2004.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

@@ Line 68: / Line 68: @@
 | [[Internal combustion engine|Combustion engine]]
 | Chemical to kinetic
-| 10–50%<ref>{{cite web | url = http://www.epa.gov/midwestcleandiesel/publications/presentations/il-finance-09-06/eberhardt.pdf |format=PDF| title = Motivations for Promoting Clean Diesels | year = 2006 | publisher = US Department Of Energy}}{{dead link|date=October 2011}}</ref>
+| 10–50%<ref>{{cite web|url=http://www.epa.gov/midwestcleandiesel/publications/presentations/il-finance-09-06/eberhardt.pdf |format=PDF |title=Motivations for Promoting Clean Diesels |year=2006 |publisher=US Department Of Energy |deadurl=yes |archiveurl=https://web.archive.org/20081007194624/http://epa.gov/midwestcleandiesel/publications/presentations/il-finance-09-06/eberhardt.pdf |archivedate=October 7, 2008 }}</ref>
 |-
 | [[Electric motor]]