List of common EMC test standards: Difference between revisions
→IEC standards: Added correct link to IEC_61000-4-2 |
|||
Line 36: | Line 36: | ||
*[[IEC/TS EN 61000-3-5]], Electromagnetic compatibility (EMC) - Part 3: Limits - Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
*[[IEC/TS EN 61000-3-5]], Electromagnetic compatibility (EMC) - Part 3: Limits - Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
||
*[[IEC EN 61000-3-12]], Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
*[[IEC EN 61000-3-12]], Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase |
||
*[[IEC EN 61000-4-2]], Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
*[[IEC EN 61000-4-2|IEC_61000-4-2]], Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
||
*[[IEC EN 61000-4-3]], Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
*[[IEC EN 61000-4-3]], Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
||
*[[IEC EN 61000-4-4]], Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
*[[IEC EN 61000-4-4]], Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
Revision as of 09:06, 16 August 2020
![]() |
The following list outlines a number of electromagnetic compatibility (EMC) standards which are known at the time of writing to be either available or have been made available for public comment. These standards attempt to standardize product EMC performance, with respect to conducted or radiated radio interference from electrical or electronic equipment, imposition of other types of disturbance on the mains supply by such equipment, and the sensitivity of such equipment to received interference.
The legal status of these standards varies according to the jurisdiction. Standards called up by the European Union's EMC Directive effectively have the force of law in the EU.
CISPR standards
CISPR standards cover product emission and immunity requirements as well as defining test methods and equipment.
CISPR is the acronym of Comité International Spécial des Perturbations Radio,[1] or the International Special Committee for Radio Protection.
- CISPR 11, Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement.
- CISPR 12, Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices.
- CISPR 14-1, Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission.
- CISPR 14-2, Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard.
- CISPR 15, Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
- CISPR 16-1, Specification for radio disturbance and immunity measurement apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus.
- CISPR 16-2, Specification for radio disturbance and immunity measurement apparatus and methods - Part 2: Methods of measurement of disturbances and immunity
- CISPR 16-3, Specification for radio disturbance and immunity measurement apparatus and methods - Part 3: Reports and recommendations of CISPR
- CISPR 16-4, Part 4-1: Uncertainties, statistics and limit modelling — Uncertainties in standardized EMC tests
- CISPR 20, Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
- CISPR 22, the CISPR standard section for Information Technology Equipment-Radio Disturbance Characteristics-Limits and Methods of Measurement. CISPR 22 has been adopted for use by most members of the European Community.
- CISPR 24, Information technology equipment - Immunity characteristics - Limits and methods of measurement.
- CISPR 25, Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers"
- CISPR 32, Electromagnetic compatibility of multimedia equipment - Emission requirements (replaced CISPR 13 and CISPR 22)
- CISPR 35, Electromagnetic compatibility of multimedia equipment - Immunity requirements (will replace CISPR 20 and CISPR 24)
IEC standards
The IEC standards on Electromagnetic compatibility (EMC) are mostly part of the IEC 61000 family. Below are some examples.
- IEC/TR EN 61000-1-1, Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application and interpretation of fundamental definitions and terms
- IEC/TR EN 61000-2-1, Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environment - Electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems
- IEC/TR EN 61000-2-3, Electromagnetic compatibility (EMC) - Part 2: Environment - Section 3: Description of the environment - Radiated and non-network-frequency-related conducted phenomena
- IEC EN 61000-3-2, Electromagnetic compatibility (EMC) - Part 3-2 - Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)
- IEC EN 61000-3-3, Electromagnetic compatibility (EMC) - Part 3-3 - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
- IEC EN 61000-3-4, Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A (note: for currents > 16 A and ≤ 75 A per phase this standard should be replaced with IEC EN 61000-3-12)
- IEC/TS EN 61000-3-5, Electromagnetic compatibility (EMC) - Part 3: Limits - Section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A
- IEC EN 61000-3-12, Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase
- IEC_61000-4-2, Electromagnetic compatibility (EMC)- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
- IEC EN 61000-4-3, Electromagnetic compatibility (EMC)- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
- IEC EN 61000-4-4, Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
- IEC EN 61000-4-5, Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test
- IEC EN 61000-4-6, Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
- IEC EN 61000-4-7, Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
- IEC EN 61000-4-8, Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
- IEC EN 61000-4-9, Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Pulse magnetic field immunity test
- IEC EN 61000-4-11, Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
- IEC EN 61000-6-1,TC 77, Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
- IEC EN 61000-6-2, TC 77, Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
- IEC EN 61000-6-3, CIS/H, Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
- IEC EN 61000-6-4, CIS/H, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
ISO standards
The following are ISO standards on automotive EMC issues.
- ISO 7637, Road vehicles - Electrical disturbances from conduction and coupling
- ISO 11452-1, Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions
- ISO 11452-2, Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation source
- ISO 11452-3, Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: On-board transmitter simulation
- ISO 11452-4, Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI)
- ISO 11452-5, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 5: Stripline
- ISO 11452-6, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 6: Parallel plate antenna
- ISO 11452-7, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 7: Direct radio frequency (RF) power injection
- ISO 11452-8, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 8: Immunity to magnetic fields
- ISO 11452-9, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 9: Portable transmitters
- ISO 11452-10, Road Vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 10: Immunity to conducted disturbances in the extended audio frequency range
- ISO 11452, Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods
- ISO 13766, Earthmoving Machinery - Electromagnetic Compatibility
- ISO 14982, Agricultural and forestry machinery—Electromagnetic compatibility—Test methods and acceptance criteria
SAE Electromagnetic Compatibility (EMC) Standards committee
- J1113/1, Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz)
- J1113/11, Immunity to Conducted Transients on Power Leads
- J1113/12, Electrical Interference by Conduction and Coupling—Capacitive and Inductive Coupling via Lines Other than Supply Lines
- J1113/13, Electromagnetic Compatibility Measurement Procedure for Vehicle Components— Part 13: Immunity to Electrostatic Discharge
- J1113/21, Electromagnetic Compatibility Measurement Procedure for Vehicle Components— Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber
- J1113/26, Electromagnetic Compatibility Measurement Procedure for Vehicle Components— Immunity to AC Power Line Electric Fields
- J1113/27, Electromagnetic Compatibility Measurements Procedure for Vehicle Components— Part 27: Immunity to Radiated Electromagnetic Fields—Mode Stir Reverberation Method
- J1113/4, Immunity to Radiated Electromagnetic Fields—Bulk Current Injection (BCI) Method
- J1752/1, Electromagnetic Compatibility Measurement Procedures for Integrated Circuits - Integrated Circuit EMC Measurement Procedures—General and Definitions
- J1752/2, Measurement of Radiated Emissions from Integrated Circuits—Surface Scan Method (Loop Probe Method) 10 MHz to 3 GHz
- J1752/3, Measurement of Radiated Emissions from Integrated Circuits—TEM/Wideband TEM (GTEM) Cell Method; TEM Cell (150 kHz to 1 GHz), Wideband TEM Cell (150 kHz to 8 GHz)
- J1812, Function Performance Status Classification for EMC Immunity Testing
- J2556, Radiated Emissions (RE) Narrowband Data Analysis—Power Spectral Density (PSD)
- J2628, Characterization—Conducted Immunity
- J551/1, Performance Levels and Methods of Measurement of Electromagnetic Compatibility of Vehicles, Boats (up to 15 m), & Machines (16.6 Hz to 18 GHz)
- J551/15, Vehicle Electromagnetic Immunity—Electrostatic Discharge (ESD)
- J551/16, Electromagnetic Immunity—Off-Vehicle Source (Reverberation Chamber Method)—Part 16: Immunity to Radiated Electromagnetic Fields
- J551/17, Vehicle Electromagnetic Immunity—Power Line Magnetic Fields
- J551/5, Performance Levels and Methods of Measurement of Magnetic and Electric Field Strength from Electric Vehicles, Broadband, 9 kHz To 30 MHz
European standards concerning unwanted electrical emissions
- EN 50 081 part1 European Generic emission standard, part1: Domestic, commercial and light industry environment, replaced by EN61000-6-3
- EN 50 081 part2 European Generic emission standard, part2: industrial environment, replaced by EN61000-6-4
- EN 55 011 European limits and methods of measurement of radio disturbance characteristics for scientific and medical equipment
- EN 55 013 European limits and methods of measurement of radio disturbance characteristics of broadcast receivers
- EN 55 014 European limits and methods of measurement of radio disturbance characteristics of household appliances and power tools, replaced by EN55014-1, and immunity part is covered by EN55014-2
- EN 55 015 European limits and methods of measurement of radio disturbance characteristics of fluorescent lamps
- EN 55 022 European limits and methods of measurement of radio disturbance characteristics of information technology equipment
- EN 55 032 Electromagnetic compatibility of multimedia equipment - Emission requirements
- EN 60 555 part 2 and 3 Disturbances of power supply network (part 2) and power fluctuations (part 3) caused by of household appliances and power tools, replaced by EN61000-3-2 and EN61000-3-3
- EN 13309 Construction Machinery - Electromagnetic compatibility of machines with internal electrical power supplies
- VDE 0875 German EMC directive for broadband interference generated by household appliances
- VDE 0871 German EMC directive for broadband and narrowband interference generated by information technology equipment
European standards concerning immunity to electrical emissions
- EN 50 082 part1 European immunity standard, part1: Domestic, commercial and light industry environment, replaced by EN61000-6-1
- EN 50 082 part2 European immunity standard, part2: industrial environment, replaced by EN61000-6-2
- EN 50 093 European, immunity to short dips in the power supply (brownouts)
- EN 55 020 European, immunity from radio interference of broadcast receivers
- EN 55 024 European immunity requirements for information technology equipment
- EN 55 101 older draft of immunity requirements for information technology equipment, replaced by EN 55 024
- EN 50 081 part1 European Generic emission standard, part1: Domestic, commercial and light industry environment, replaced by EN61000-6-3
- EN 50 081 part2 European immunity requirements for information technology equipment, replaced by EN61000-6-4
American standards
- FCC Part 15 regulates unlicensed radio-frequency transmissions, both intentional and unintentional.
- FCC Part 15 Subpart A contains a general provision that "devices may not cause interference and must accept interference from other sources."
- FCC Part 15 Subpart B US limits and methods of measurement of radio disturbance, measuring radio waves accidentally emitted from devices not specifically designed to emit radio waves ("unintentional"), both directly ("radiated") and indirectly ("conducted")
- The rest of FCC Part 15 (subparts C through H) deal with unlicensed devices specifically designed to emit radio waves ("intentional"), such as wireless LAN, cordless telephones, low-power broadcasting, walkie-talkies, etc.
- Conducted emissions are regulated from 150 kHz to 30 MHz, and radiated emissions are regulated from 30 MHz and up.
- MIL-STD 461 is a US Military Standard addressing EMC for subsystem and components. Currently in revision G, it covers Conducted and Radiated Emissions and Susceptibility.
- MIL-STD 464 is a US Military Standard addressing EMC for systems. Currently in revision G, it covers Conducted and Radiated Emissions and Susceptibility.
- MIL-STD-469, MILITARY STANDARD:This standard establishes the engineering interface requirements to control the electromagnetic emission and susceptibility characteristics of all new military radar equipment and systems operating between 100 megahertz (MHz) and 100 gigahertz (GHz).
References
- ^ Gideon Wiid, PhD student, Paul van der Merwe EE Eng (2 May 2007). "IEC and CISPR Standards" (PDF). Archived from the original (PDF) on 15 December 2010.
External links
- GR-1089-CORE. Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment. Part of the NEBS standards.