First-hop redundancy protocol
A first hop redundancy protocol (FHRP) is a computer networking protocol which is designed to protect the default gateway used on a subnetwork by allowing two or more routers to provide backup for that address;[1][2] in the event of failure of an active router, the backup router will take over the address, usually within a few seconds. In practice, such protocols can also be used to protect other services operating on a single IP address, not just routers.
Examples of such protocols include (in approximate order of creation):
- Hot Standby Router Protocol (HSRP) - Cisco's initial, proprietary standard developed in 1998[3]
- Virtual Router Redundancy Protocol (VRRP) - an open (albeit patent-encumbered) standard protocol based largely on Cisco's HSRP
- Common Address Redundancy Protocol (CARP) - patent-free, unencumbered alternative to Cisco's HSRP and the IETF's VRRP, developed in October 2003
- Extreme Standby Router Protocol (ESRP) - Extreme Networks' proprietary standard with fast failover and layer 2 protection
- Gateway Load Balancing Protocol (GLBP) - a more recent proprietary standard from Cisco that permits load balancing as well as redundancy
- Routed Split multi-link trunking (R-SMLT) - an Avaya redundancy protocol
- NetScreen Redundancy Protocol (NSRP) - a Juniper Networks proprietary router redundancy protocol providing load balancing
- Chassis Cluster Redundant Ethernet - a Juniper Networks proprietary Ethernet redundancy protocol, used on its SRX platform[4]
- Multi-active Gateway Protocol (MAGP) - a Mellanox proprietary protocol based on VRRP that allows active-active operation[5]
References
[edit]- ^ "First Hop Redundancy Protocol (FHRP)". Cisco. Retrieved 2019-06-05.
- ^ gokhankosem (2018-10-16). "First Hop Redundancy Protocols". IpCisco. Retrieved 2019-06-05.
- ^ "Cisco Protocols: HSRP, VRRP, GLBP". Petri. 2012-04-11. Retrieved 2019-06-05.
- ^ "Chassis Cluster Redundant Ethernet Interfaces - TechLibrary - Juniper Networks". Juniper Networks. 2019-05-30. Retrieved 2019-06-09.
- ^ "HowTo Configure MAGP on Mellanox Switches". community.mellanox.com. 1 March 2020.
 | This computer networking article is a stub. You can help Wikipedia by expanding it. |