Broadband

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Bcsr4ever (talk | contribs) at 00:16, 13 December 2007 (added links to specific broadband types.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Broadband in telecommunications is a term that refers to a signaling method that includes or handles a relatively wide range of frequencies, which may be divided into channels or frequency bins. Broadband is always a relative term, understood according to its context. The wider the bandwidth, greater is the information carrying capacity. In radio, for example, a very narrow-band signal will carry Morse code; a broader band will carry speech; a still broader band is required to carry music without losing the high audio frequencies required for realistic sound reproduction. A television antenna described as "normal" may be capable of receiving a certain range of channels; one described as "broadband" will receive more channels. In data communications a modem will transmit a bandwidth of 64 kilobits per seconds (kbit/s) over a telephone line; over the same telephone line a bandwidth of several megabits per second can be handled by ADSL, which is described as broadband (relative to a modem over a telephone line, although much less than can be achieved over a fibre optic circuit, for example).[citation needed]

Broadband in data communications can refer to Broadband Networks or Broadband internet and may have the same meaning as above, so that data transmission over a fiber optic cable would be referred to as broadband as compared to a telephone modem operating at 600 bits per second.[citation needed]

However, broadband in data communications is frequently used in a more technical sense to refer to data transmission where multiple pieces of data are sent simultaneously to increase the effective rate of transmission, regardless of actual data rate. In network engineering this term is used for methods where two or more signals share a medium.[citation needed]

The various forms of Digital Subscriber Line (DSL) services are broadband in the sense that digital information is sent over a high-bandwidth channel above the baseband voice channel on a single pair of wires.[citation needed]

A baseband transmission sends one type of signal using a medium's full bandwidth, as in 100BASE-T Ethernet. Ethernet, however, is the common interface to broadband modems such as DSL data links, and has a high data rate itself, so is sometimes referred to as broadband. Ethernet provisioned over cable modem is a common alternative to DSL.[citation needed]