Jump to content

War of the currents

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 58.173.93.31 (talk) at 08:32, 17 March 2008. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In the "War of Currents" era (sometimes, "War of the Currents" or "Battle of Currents") in the late 1880s, George Westinghouse and Thomas Edison became adversaries due to Edison's promotion of direct current (DC) for electric power distribution over alternating current (AC) advocated by Westinghouse and Nikola Tesla.

Introduction

During the initial years of electricity distribution, Edison's direct current was the standard for the United States and Edison was not disposed to lose all his patent royalties. Direct current worked well with incandescent lamps that were the principal load of the day, and with motors. Direct current systems could be directly used with storage batteries, providing valuable load-leveling and backup power during interruptions of generator operation. From his work with rotary magnetic fields, Tesla devised a system for generation, transmission, and use of AC power. He partnered with George Westinghouse to commercialize this system. Westinghouse had previously bought the rights to Tesla's polyphase system patents and other patents for AC transformers from Lucien Gaulard and John Dixon Gibbs.

  • Thomas Edison, American inventor and businessman, was known as "The Wizard of Menlo Park" and pushed for the development of a DC power network.
    Thomas Edison, American inventor and businessman, was known as "The Wizard of Menlo Park" and pushed for the development of a DC power network.
  • George Westinghouse, American entrepreneur and engineer, backed financially the development of a practical AC power network.
    George Westinghouse, American entrepreneur and engineer, backed financially the development of a practical AC power network.
  • Nikola Tesla, Serbian-American inventor, physicist, and electro-mechanical engineer, was known as "The Wizard of The West"[1] and was instrumental in developing AC networks.
    Nikola Tesla, Serbian-American inventor, physicist, and electro-mechanical engineer, was known as "The Wizard of The West"[1] and was instrumental in developing AC networks.

Several undercurrents lay beneath this rivalry. Edison was a brute-force experimenter, but was no mathematician. AC cannot properly be understood or exploited without a substantial understanding of mathematics and mathematical physics, which Tesla possessed. Tesla had worked for Edison but was undervalued (for example, when Edison first learned of Tesla's idea of alternating-current power transmission, he dismissed it: "[Tesla's] ideas are splendid, but they are utterly impractical."[2]). Bad feelings were exacerbated because Tesla had been cheated by Edison of promised compensation for his work.[3][4] Edison would later come to regret that he had not listened to Tesla and used alternating current.[5]

Electric power transmission

The competing systems

Edison's DC distribution system consisted of generating plants feeding heavy distribution conductors, with customer loads (lighting and motors) tapped off it. The system operated at the same voltage level throughout; for example, 100 volt lamps at the customer's location would be connected to a generator supplying 110 volts, to allow for some voltage drop in the wires between the generator and load. The voltage level was chosen for convenience in lamp manufacture; high-resistance carbon filament lamps could be constructed to withstand 100 volts, and to provide lighting performance economically competitive with gas lighting. At the time it was felt that 100 volts was not likely to present a severe hazard of electrocution.

To save on the cost of copper conductors, a three-wire distribution system was used. The three wires were at +110 volts, 0 volts and −110 volts relative potential. 100-volt lamps could be operated between either the +110 or −110 volt legs of the system and the 0-volt "neutral" conductor, which only carried the unbalanced current between the + and − sources. The resulting three-wire system used less copper wire for a given quantity of electric power transmitted, while still maintaining (relatively) low voltages. However, even with this innovation, the voltage drop due to the resistance of the system conductors was so high that generating plants had to be located within a mile (1–2 km) or so of the load. Higher voltages could not so easily be used with the DC system because there was no efficient low-cost technology that would allow reduction of a high transmission voltage to a low utilization voltage.

In the alternating current system, a transformer was used between the (relatively) high voltage distribution system and the customer loads. Lamps and small motors could still be operated at some convenient low voltage. However, the transformer would allow power to be transmitted at much higher voltages, say, ten times that of the loads. For a given quantity of power transmitted, the wire size would be inversely proportional to the voltage used; or to put it another way, the allowable length of a circuit, given a wire size and allowable voltage drop, would increase approximately as the square of the distribution voltage. This had the practical significance that fewer, larger, generating plants could serve the load in a given area. Large loads, such as industrial motors or converters for electric railway power, could be served by the same distribution network that fed lighting, by using a transformer with a suitable secondary voltage.

Early transmission analysis

Edison's response to the DC system limitations was to generate power close to where it was consumed (today called, distributed generation) and install large conductors to handle the growing demand for electricity, but this solution proved to be costly (especially for rural areas which could not afford building a local station[6] or paying for massive amounts of very thick copper wire), impractical (including, but not limited to, inefficient voltage conversion), and unmanageable. Edison and his company, though, would have profited extensively from the construction of the multitude of power plants required for introducing electricity to many communities.

Direct current could not easily be changed to higher or lower voltages. This meant that separate electrical lines had to be installed in order to supply power to appliances that used different voltages, for example, lighting and electric motors. This led to a greater number of wires to lay and maintain, wasting money and introducing unnecessary hazards. A number of deaths from the Great Blizzard of 1888 were attributed to collapsing overhead power lines in New York City.[7][8]

Alternating current could be transmitted over long distances at high voltages, at lower current for lower voltage drops (thus with greater transmission efficiency), and then conveniently stepped down to low voltages for use in homes and factories. When Tesla introduced a system for alternating current generators, transformers, motors, wires and lights in November and December of 1887, it became clear that AC was the future of electric power distribution, although DC distribution was used in downtown metropolitan areas for decades thereafter.

Low frequency (50–60 Hz) alternating currents can be more dangerous than similar levels of DC since the alternating fluctuations can cause the heart to lose coordination, inducing ventricular fibrillation, which then rapidly leads to death within six to eight minutes from anoxia of the brain and medulla.[9] High voltage DC power can be more dangerous than AC, however, since it tends to cause muscles to lock in position, stopping the victim from releasing the energised conductor once grasped. However, any practical distribution system will use voltage levels quite sufficient for a dangerous amount of current to flow, whether it uses alternating or direct current. Since the precautions against electrocution are similar, ultimately, the advantages of AC power transmission outweighed this theoretical risk, and it was eventually adopted as the standard worldwide.

Tesla's US390721 Patent for a "Dynamo Electric Machine"

Transmission loss

The advantage of AC for distributing power over a distance is due to the ease of changing voltages with a transformer. Power is the product of current × voltage (P = IV). For a given amount of power, a low voltage requires a higher current and a higher voltage requires a lower current. Since metal conducting wires have a certain resistance, some power will be wasted as heat in the wires. This power loss is given by P = I²R. Thus, if the overall transmitted power is the same, and given the constraints of practical conductor sizes, low-voltage, high-current transmissions will suffer a much greater power loss than high-voltage, low-current ones. This holds whether DC or AC is used. However, it was very difficult to transform DC power to a high-voltage, low-current form efficiently, whereas with AC this can be done with a simple and efficient transformer. This was the key to the success of the AC system. Modern transmission grids regularly use AC voltages up to 765,000 volts. [10]

Alternating current transmission lines do have other losses not observed with direct current. Due to the skin effect, a conductor will have a higher resistance to alternating current than to direct current; the effect is measurable and of practical significance for large conductors carrying on the order of thousands of amperes. The increased resistance due to the skin effect can be offset by changing the shape of conductors.

Current Wars

Edison's publicity campaign

Edison carried out a campaign to discourage the use[11] of alternating current, including spreading information on fatal AC accidents, publicly killing animals, and lobbying against the use of AC in state legislatures. Edison directed his technicians, primarily Arthur Kennelly and Harold P. Brown,[12] to preside over several AC-driven executions of animals, primarily stray cats and dogs but also unwanted cattle and horses. Acting on these directives, they were to demonstrate to the press that alternating current was more dangerous than Edison's system of direct current.[13] Edison's series of animal executions peaked with the filmed electrocution of Topsy, a Coney Island circus elephant. He also tried to popularize the term for being electrocuted as being "Westinghoused".

Edison opposed capital punishment, but his desire to disparage the system of alternating current led to the invention of the electric chair. Harold P. Brown, who was at this time being secretly paid by Edison, constructed the first electric chair for the state of New York in order to promote the idea that alternating current was deadlier than DC.[14]

When the chair was first used, on August 6, 1890, the technicians on hand misjudged the voltage needed to kill the condemned prisoner, William Kemmler. The first jolt of electricity was not enough to kill Kemmler, and only left him badly injured. The procedure had to be repeated and a reporter on hand described it as "an awful spectacle, far worse than hanging." George Westinghouse commented: "They would have done better using an axe."

Niagara Falls

Experts announced proposals to harness Niagara Falls for generating electricity, even briefly considering compressed air as a power transmission medium. Against General Electric and Edison's proposal, Westinghouse, using Tesla's AC system, won the international Niagara Falls Commission contract. The commission was led by Lord Kelvin and backed by entrepreneurs such as J. P. Morgan, Lord Rothschild, and John Jacob Astor IV. Work began in 1893 on the Niagara Falls generation project and electric power at the Falls was generated and transmitted as alternating current.

Some doubted that the system would generate enough electricity to power industry in Buffalo. Tesla was sure it would work, saying that Niagara Falls had the ability to power the entire eastern U.S. Polyphase alternating current transmission had been previously demonstrated at Mill Creek California, and the Lauffen-Neckar demonstration in 1891. The Chicago World's Fair in 1893 exhibited a complete polyphase generation and distribution system installed by Westinghouse. However, none of the previous demonstration projects were on the scale of power available from Niagara. On November 16, 1896, electrical power was sent from Niagara Falls to industries in Buffalo from the hydroelectric generators at the Edward Dean Adams Station. The hydroelectric generators were built by Westinghouse Electric Corporation using Tesla's AC system patent. The nameplates on the generators bore Tesla's name. To appease the interests of General Electric, the contract to construct the transmission lines to Buffalo using the Tesla patents were given to them.[15]

Competition outcome

AC replaced DC for central station power generation and power distribution, enormously extending the range and improving the safety and efficiency of power distribution. Edison's low-voltage distribution system using DC ultimately lost to AC devices proposed by others: primarily Tesla's polyphase systems, and also other contributors, such as Charles Proteus Steinmetz (in 1888, he was working in Pittsburgh for Westinghouse[16]). Tesla's Niagara Falls system was a turning point in the acceptance of alternating current. Eventually, Edison's General Electric company converted to the AC system and began manufacture of AC machines. Centralized power generation became possible when it was recognized that alternating current electric power lines can transport electricity at low costs across great distances by taking advantage of the ability to transform the voltage using power transformers.

Alternating current electricity distribution is today the penultimate stage in the delivery (before retail) of electricity to end users. It is generally considered to include medium-voltage (less than 50 kV) power lines, electrical substations and pole-mounted transformers, low-voltage (less than 1000 V) distribution wiring and sometimes electricity meters. Power transformers, installed at substations, could be used to raise the voltage from the generators and reduce it to supply loads. Increasing the voltage reduced the current in the transmission and distribution lines and hence the size of conductors required and distribution losses incurred. This made it more economical to distribute power over long distances. Generators (such as hydroelectric sites) could be located far from the loads.

Alternating current transmission was simpler; the processes involved were recognized as easier, faster and less expensive to implement. This allowed the rapid deployment of bulk transfer systems for electrical power from place to place to bring about the electrification of the United States. Typically, the main power transmission was between the power plant and a substation near a populated area. Due to the large amount of power involved, the transmission normally took place at high voltage and was transmitted over long distances through overhead high tension lines. Underground power transmission was used only in densely populated areas (such as large cities) because of the high cost of installation and maintenance and because the power losses increase dramatically compared with overhead transmission. Underground high voltage transmission uses much lower voltages to avoid discharge to the surrounding ground, and lower voltages require much thicker wires unless superconductors and cryogenic technology are used. Alternating current power transmission system grids today provide redundant paths and lines for power routing from any power plant to any load center, via any possible route, based on the economics of the transmission path, the cost of power and the perceived importance of keeping a particular load center powered at all times.

Engineers today design alternating current transmission networks in such a way as to transport the energy as efficiently as possible while at the same time taking into account economic factors, network safety and redundancy. These networks use components such as power lines, cables, circuit breakers, switches and transformers.

Remnant and existent DC systems

Some cities held their DC networks for any off times. For example, central Helsinki had a DC network until the late 1940s, and Stockholm lost its dwindling DC network in the 1960s. A mercury arc valve rectifier station would convert AC for the downtown DC network. New York City's electric utility company, Consolidated Edison, continued to supply direct current to customers who had adopted it early in the twentieth century, mainly for elevators. The New Yorker Hotel, constructed in 1929, had a large direct-current power plant and did not convert fully to alternating-current service until well into the 1960s [17]. In January 1998, Consolidated Edison started to eliminate DC service. At that time there were 4,600 DC customers. By 2006, there were only 60 customers using DC service, and on November 14, 2007, the last direct-current distribution by Con Edison was shut down [18]

Electric railways that use a third-rail system generally employ high-current DC power between 500 and 750 volts; railways with overhead catenary lines use a number of power schemes including both high-voltage AC and high-current DC.

High voltage direct current (HVDC) systems are used for bulk transmission of energy from distant generating stations or for interconnection of separate alternating-current systems. These HVDC systems use solid state devices that were unavailable during the War of Currents era. Power is still converted to and from alternating current at each side of the modern HVDC link. The advantages of present HVDC over historic AC systems for bulk transmission include higher power ratings for a given line (important since installing new lines and even upgrading old ones is extremely expensive) and better control of power flows, especially in transient and emergency conditions that can often lead to blackouts.

While direct current power distribution systems for transmission of power at utilization voltage over significant distances is essentially extinct, use of DC power is still common when transmission distances are small, and especially when energy storage or conversion uses batteries or fuel cells. These applications include

In these applications, direct current may be used directly or converted to alternating current using power electronic devices either for use by local AC equipment or for energy transmission by the AC distribution and transmission network. In the future this may provide a way to supply energy to a grid from distributed sources that many not inherently supply energy in the form of alternating current. For example, hybrid vehicle owners may rent the capacity of their vehicle's batteries for load-levelling purposes by the local electrical utility company.

  • The "War of the Currents" was part of the plot for the film The Prestige although the rivalry between Tesla and Edison was exaggerated and there was no mention of Westinghouse.
  • "Edison's Medicine" was a song by the band Tesla from the album Psychotic Supper which features the War of Currents.
  • The 1980 movie The Secret of Nikola Tesla (aka Tajna Nikole Tesle) starring Orson Welles as J.P. Morgan depicts many of Tesla's achievements.
  • The first episode of the 2008 television series Murdoch Mysteries was a murder committed during one of the animal electrocution demonstrations.

See also

General
Electricity
AC advocates
Nikola Tesla, Sebastian Ziani de Ferranti, George Westinghouse, Charles Proteus Steinmetz, Charles F. Scott
DC advocates
Thomas Edison, Arthur Kennelly, Harold P. Brown

References and articles

References
  1. ^ Margaret Cheney, Tesla: Man Out of Time. Page 21. (cf. "Everyone in London is talking about the New Wizard of the West—and they don't mean Mr. Edison".)
  2. ^ Richard Munson, From Edison to Enron: The Business of Power and what it Means for the Future of Electricity. Page 23
  3. ^ Tesla was promised 50,000 dollars for work to improve Edison's inefficient dynamo. Tesla did improve the dynamos after nearly a year's worth of work, but Edison did not pay him the promised money. Edison went as far as trying to say he was joking, saying “Tesla, you don't understand our American humor”. For more on this see, "Tesla: Man Out of Time" By Margaret Cheney (Simon and Schuster, 2001. ISBN 0743215362), pages 56-57.
  4. ^ H. W. Brands, The Reckless Decade. Page 48.
  5. ^ Cheney, M., et al., (1999). Tesla, master of lightning. Page 19. (cf., "Edison would much later admit that the biggest mistake he ever made was in trying to develop direct current, rather than the vastly superior alternating".)
  6. ^ H. W. Brands, Reckless Decade. Page 50.
  7. ^ Some companies had their DC lines in that city buried underground for safety, but many lines still ran overhead.
  8. ^ http://www.vny.cuny.edu/blizzard/building/building.html
  9. ^ Wiggers, C. J. et al. 1940
  10. ^ Donald G. Fink and H. Wayne Beaty, Standard Handbook for Electrical Engineers, Eleventh Edition,McGraw-Hill, New York, 1978, ISBN 0-07020974-X , chapter 14, page 14-3 "Overhead power transmission"
  11. ^ Brandon, C. (1999). The electric chair: an unnatural American history. Page 72. (cf. "Edison and his captains embarked on a no-holds-barred smear campaign designed to discredit AC as too dangerous [...]"
  12. ^ Brown and Edison's letters, as well as Brown and Kennelly's letters, indicate Brown was taking weekly directions from Edison's company. For more see, Brandon, C. (1999). The electric chair: an unnatural American history. Page 70.
  13. ^ Brandon, C. (1999). The electric chair: an unnatural American history. Page 9 (cf. "When New York began testing its new electric chair on dogs, cats, cattle and horses in 1889 it invited reporters to witness the instant death that results".)
  14. ^ http://inventors.about.com/library/weekly/aa102497.htm
  15. ^ Berton, P. (1997). Niagara: a history of the Falls. Page 163. (cf., As a form of compromise, General Electric was given the contract to build the transmission and distribution lines to Buffalo, using the Tesla patents.)
  16. ^ Thomas Parke, Networks of Power. Page 120
  17. ^ Tom Blalock, Powering the New Yorker: A Hotel's Unique Direct Current System, in IEEE Power and Energy Magazine, Jan/Feb 2006
  18. ^ Jennifer Lee, New York Times November 16, 2007, "Off Goes the Power Current Started by Thomas Edison" (retrieved 2007 Nov 16)
Further reading
  • Munson, Richard (2005). From Edison to Enron: the business of power and what it means for the future of electricity. Westport, Conn: Praeger Publishers.
  • Reynolds, Terry S., and Bernstein, Theodore. “Edison and the Chair,” IEEE Technology and Society Magazine, March 1989, pp. 19—28.
  • Conot, Robert, A Streak of Luck: The Life and Legend of Thomas Alva Edison. New York: Seaview Books,
  • Berton, Pierre (1997). Niagara: a history of the Falls. New York: Kodansha International.
  • Tom McNichol, AC/DC: The Savage Tale of the First Standards War.
  • Silverberg, Robert, Light for the World, Edison and the Electric Power Industry. Princeton: Van Nostrand, 1967, pp. 229—243.
  • Westinghouse Electric Corporation, "Electric power transmission patents; Tesla polyphase system. (Transmission of power; polyphase system; Tesla patents)
  • Westinghouse Electric & Manufacturing Company, Collection of Westinghouse Electric and Manufacturing Company contracts, Pittsburgh, Pa.
  • Walker, James Blaine (1949). The epic of American industry. New York: Harper.
  • Cheney, Margaret, Uth, Robert, & Glenn, Jim (1999). Tesla, master of lightning. New York: MetroBooks.
  • Dobson, K., & Roberts, M. D. (2002). Physics: teacher resource pack. Cheltenham: Nelson Thornes.
  • Foster, Abram John (1979). The coming of the electrical age to the United States. New York: Arno Press.
  • Bordeau, Sanford P. (1982). Volts to Hertz-- the rise of electricity: from the compass to the radio through the works of sixteen great men of science whose names are used in measuring electricity and magnetism. Minneapolis, Minn: Burgess Pub. Co.
  • The Electrical engineer, "A new system of alternating current motors and transformers". (1884). London: Biggs & Co. Pages 568 - 572.
  • The Electrical engineer, "Practical electrical problems at Chicago". (1884). London: Biggs & Co. Pages 458 - 459, 484 - 485, and 489 - 490.
  • Brands, Henry William (1995). The reckless decade: America in the 1890s. New York: St. Martin's Press.
  • Seifer, Marc J. (1998). Wizard: the life and times of Nikola Tesla : biography of a genius. Secaucus, N.J.: Carol Pub.
  • Brandon, Craig (1999). The electric chair: an unnatural American history. Jefferson, N.C.: McFarland & Co.
  • Dommermuth-Costa, C. (1994). Nikola Tesla: a spark of genius. Minneapolis: Lerner Publications Co.
  • Hughes, Thomas Parke (1983). Networks of power: electrification in Western society, 1880-1930. Baltimore: Johns Hopkins University Press.
  • Scholnick, Robert J. (1992). American literature and science. Lexington: University Press of Kentucky. Pages 157 - 171.
  • Beyer, Rick (2003). The greatest stories never told: 100 tales from history to astonish, bewilder, & stupefy. New York: HarperResource. Pages 122 - 123.
  • Edquist, Charles, Hommen, Leif, & Tsipouri, Lena J. (2000). Public technology procurement and innovation. Economics of science, technology, and innovation, v. 16. Boston: Kluwer Academic.
  • Schurr, Sam H., Burwell, Calvin C., Devine, Warren D., Sonenblum, Sidney (1990). Electricity in the American economy: agent of technological progress. Contributions in economics and economic history, no. 117. New York: Greenwood Press.
  • Mats Fridlund & Helmut Maier, The second battle of the currents: a comparative study of engineering nationalism in German and Swedish electric power, 1921-1961.
Websites
Retrieved from "https://en.wikipedia.org/w/index.php?title=War_of_the_currents&oldid=198815607"