Jump to content

Colour Genie

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 86.131.102.228 (talk) at 21:24, 8 July 2008 (spelling, grammar). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The EACA EG2000 Colour Genie is a computer produced by Hong Kong-based manufacturer EACA. It followed their earlier Video Genie I and II computers and was released around the same time as the business-oriented Video Genie III. The BASIC is compatible with the Video Genie I and II and the TRS-80, except for graphic and sound commands; some routines for Video Genie I BASIC commands were left over in the Colour Genie's BASIC ROM. Programs were provivided to load TRS-80 programms into the Colour Genie. Colour Genie disks could be read in a TRS-80 floppy disk drive but not vice versa.

Unlike the earlier Video Genies, which were compatible with their main competitor (the Model I TRS-80), the Colour Genie is also incompatible with the rival TRS-80 Color Computer -- one fundamental difference being the different CPUs.

Technical Specifications

File:C kong.jpg
Colour Kong

Internal hardware

  • Video Hardware
    • 6845 CRTC
    • 40×25 text, 16 colours, 128 user defined characters
    • 160×102 graphics, 4 colours
  • RAM:
    • 16 KB RAM, expandable to 32 KB
  • ROM:
    • 16 KB containing LEVEL II BASIC
  • Keyboard
    • 63-key typewriter style
    • 4 programmable function keys

I/O ports and power supply

  • I/O ports:
    • Composite video out and audio out (cinch plugs)
    • Integrated RF modulator antenna output, which also carries sound, to TV
    • Cartridge expansion slot (slot for edge connector with Z80 CPU address/data bus lines and control signals, as well as GND and voltage pins; used for ROM cartridges or the floppy disk controller
    • 1200 baud tape interface (5 pin DIN)
    • RS-232 port (5 pin DIN)
    • Lightpen port (5 pin DIN)
    • Parallel port for printer or joystick controller
  • Power supply: 5V DC, +12V DC and -12V DC

External hardware options

  • Floppy disk controller with floppy disk station.
    • Supported up to 4 drives (5.25 inch).
    • Support for 90 KB SS/SD up to 720 KB DS/DD drives.
  • Cassette recorder
  • EPROM cartridge of 12 KB
  • EG2013 Joystick Controller
    • 2 Analogue joysticks with keypads