Kelvin

For other uses, see Kelvin (disambiguation).

Kelvin temperature conversion formulae

	from kelvins	to kelvins
Celsius	x K ≘ (x − 273.15) °C	x °C ≘ (x + 273.15) K
Fahrenheit	x K ≘ (x × ⁠9/5⁠ − 459.67) °F	x °F ≘ (x + 459.67) × ⁠5/9⁠ K
Rankine	x K ≘ x × ⁠9/5⁠ °R	x °R ≘ x × ⁠5/9⁠ K
For temperature intervals rather than specific temperatures, 1 K = 1 °C = ⁠9/5⁠ °F = ⁠9/5⁠ °R Conversion between temperature scales

The kelvin (symbol: K) is a unit increment of temperature and is one of the seven SI base units. The Kelvin scale is a thermodynamic (absolute) temperature scale where absolute zero, the theoretical absence of all thermal energy, is zero (0 K). The Kelvin scale and the kelvin are named after the British physicist and engineer William Thomson, 1st Baron Kelvin (1824–1907), who wrote of the need for an “absolute thermometric scale”.

Typographical and usage conventions

Uppercase/lowercase, plural form usage, and written conventions

When reference is made to the unit kelvin (either a specific temperature or a temperature interval), kelvin is always spelled with a lowercase k unless it is the first word in a sentence. When reference is made to the "Kelvin scale", the word "kelvin"—which is normally a noun—functions adjectivally to modify the noun "scale" and is capitalized.

Until the 13th General Conference on Weights and Measures (CGPM) in 1967–1968, the unit kelvin was called a "degree", the same as with the other temperature scales at the time. It was distinguished from the other scales with either the adjective suffix "Kelvin" ("degree Kelvin") or with "absolute" ("degree absolute") and its symbol was °K. Note that the latter (degree absolute), which was the unit’s official name from 1948 until 1954, was rather ambiguous since it could also be interpreted as referring to the Rankine scale. Before the 13th CGPM, the plural forms were "degrees Kelvin" or "degrees absolute". The 13th CGPM changed the name to simply "kelvin" (symbol K). The omission of "degree" indicates that it is not relative to an arbitrary reference point such as the Celsius and Fahrenheit scales, but rather an absolute unit of measure which can be manipulated algebraically (e.g. multiply by two to indicate twice the amount of heat).

Temperatures and intervals

Because the kelvin is an individual unit of measure, it is particularly well-suited for expressing temperature intervals: differences between temperatures or their uncertainties (e.g., “Agar exhibited a melting point hysteresis of 25 kelvins.” and “The uncertainty was 10 millikelvins.”). Of course, the kelvin is also used to express specific temperatures along its scale (e.g. “Gallium melts at 302.9146 kelvin”).

One disadvantage of the kelvin is that intervals and specific temperatures on the Kelvin scale use exactly the same symbol (e.g., “Agar exhibited a melting point hysteresis of 25 K,” and “The triple point of hydrogen is 13.8033 K”).

Formatting and typestyle for the K symbol

The kelvin symbol is always a roman, non-italic capital K. In the SI naming convention, all symbols named after a person are capitalized; in the case of the kelvin, capitalizing also distinguishes the symbol from the SI prefix “kilo”, which has the lowercase k as its symbol. The admonition against italicizing the symbol K applies to all SI unit symbols; only symbols for variables and constants (e.g. P = pressure, and c = 299,792,458 m/s) are italicized in scientific and engineering papers. As with most other SI unit symbols (angle symbols, e.g. 45° 3′ 4″, are the exception) there is a space between the numeric value and the kelvin symbol (e.g. “99.987 K”).

The special Unicode kelvin character

Unicode provides a compatibility character for the kelvin at U+212A (decimal 8490), for compatibility with CJK encodings that provide such a character (as such, in most fonts the width is the same as for fullwidth characters). Below in maroon text is the kelvin character followed immediately by a simple uppercase K:

K K

When viewed on computers that properly support Unicode, the above line may be similar to the line below (size may vary):

The canonical decomposition of this character is U+004B (uppercase K), so some browsers may simply display a "K" in its place due to Unicode normalization.

Mixed use of Kelvin and Celsius scales in technical articles

In science and in engineering, the Celsius scale and the kelvin are often used simultaneously in the same article (e.g. “…its measured value was 0.01023 °C with an uncertainty of 70 µK…”). This practice is permissible because the degree Celsius is a special name for the kelvin for use in expressing Celsius temperatures and the magnitude of the degree Celsius is exactly equal to that of the kelvin. Notwithstanding the /b/ official endorsement provided by Resolution 3 of the 13th CGPM, states “a temperature interval may also be expressed in degrees Celsius,” the practice of simultaneously using both “°C” and “K” remains widespread throughout the scientific world as the use of SI prefixed forms of the degree Celsius (such as “µ°C” or “microdegrees Celsius”) to express a temperature interval has not been well-adopted.

History of the Kelvin scale

Below are some historic milestones in the development of the Kelvin scale and its unit increment, the kelvin. For more on the history of thermodynamic temperature, see Thermodynamic temperature: History of thermodynamic temperature.

• 1848: Lord Kelvin (William Thomson), wrote in his paper, On an Absolute Thermometric Scale, of the need for a scale whereby “infinite cold” (absolute zero) was the scale’s null point, and which used the degree Celsius for its unit increment. Thomson calculated that absolute zero was equivalent to −273 °C on the air thermometers of the time. This absolute scale is known today as the Kelvin thermodynamic temperature scale. It’s noteworthy that Thomson’s value of “−273” was actually derived from 0.00366, which was the accepted expansion coefficient of gas per degree Celsius relative to the ice point. The inverse of −0.00366 expressed to five significant digits is −273.22 °C which is remarkably close to the true value of −273.15 °C.

• 1954: Resolution 3 of the 10th CGPM gave the Kelvin scale its modern definition by designating the triple point of water as its second defining point and assigned its temperature to exactly “273.16 degrees Kelvin.”

• 1967/1968: Resolution 3 of the 13th CGPM renamed the unit increment of thermodynamic temperature “kelvin”, symbol K, replacing “degree absolute”, symbol °K. Further, feeling it useful to more explicitly define the magnitude of the unit increment, the 13th CGPM also held in Resolution 4 that “The kelvin, unit of thermodynamic temperature, is equal to the fraction 1/273.16 of the thermodynamic temperature of the triple point of water.”

• 2005: The Comité International des Poids et Mesures (CIPM), a committee of the CGPM, affirmed that for the purposes of delineating the temperature of the triple point of water, the definition of the Kelvin thermodynamic temperature scale would refer to water having an isotopic composition specified as VSMOW.

See also

• Comparison of temperature scales
• Celsius
• Fahrenheit
• Heat
• ITS-90
• Rankine scale
• Thermodynamic temperature
• Triple point

External links

• Bureau International des Poids et Mesures (2006). "The International System of Units (SI) Brochure" (.PDF). 8th Edition. International Committee for Weights and Measures. Retrieved 2008-02-06. {{cite journal}}: Cite journal requires |journal= (help)