Data recovery
Data recovery is the process of salvaging data from damaged, failed, corrupted, or inaccessible secondary storage media when it cannot be accessed normally. Often the data are being salvaged from storage media such as hard disk drives, storage tapes, CDs, DVDs, RAID, and other electronics. Recovery may be required due to physical damage to the storage device or logical damage to the file system that prevents it from being mounted by the host operating system.
The most common "data recovery" scenario involves an operating system (OS) failure (typically on a single-disk, single-partition, single-OS system), in which case the goal is simply to copy all wanted files to another disk. This can be easily accomplished with a Live CD, most of which provide a means to mount the system drive and backup disks or removable media, and to move the files from the system disk to the backup media with a file manager or optical disc authoring software. Such cases can often be mitigated by disk partitioning and consistently storing valuable data files (or copies of them) on a different partition from the replaceable OS system files.
Another scenario involves a disk-level failure, such as a compromised file system or disk partition or a hard disk failure. In any of these cases, the data cannot be easily read. Depending on the situation, solutions involve repairing the file system, partition table or master boot record, or hard disk recovery techniques ranging from software-based recovery of corrupted data to hardware replacement on a physically damaged disk. If hard disk recovery is necessary, the disk itself has typically failed permanently, and the focus is rather on a one-time recovery, salvaging whatever data can be read.
In a third scenario, files have been "deleted" from a storage medium. Typically, deleted files are not erased immediately; instead, references to them in the directory structure are removed, and the space they occupy is made available for later overwriting. In the meantime, the original file may be restored. Although there is some confusion over the term, "data recovery" may also be used in the context of forensic applications or espionage.
Recovering data after physical damage
A wide variety of failures can cause physical damage to storage media. CD-ROMs can have their metallic substrate or dye layer scratched off; hard disks can suffer any of several mechanical failures, such as head crashes and failed motors; tapes can simply break. Physical damage always causes at least some data loss, and in many cases the logical structures of the file system are damaged as well. Any logical damage must be dealt with before files can be salvaged from the failed media.
Most physical damage cannot be repaired by end users. For example, opening a hard disk in a normal environment can allow airborne dust to settle on the platter and become caught between the platter and the read/write head, causing new head crashes that further damage the platter and thus compromise the recovery process. Furthermore, end users generally do not have the hardware or technical expertise required to make these repairs. Consequently, costly data recovery companies are often employed to salvage important data.
Recovery techniques
Recovering data from physically-damaged hardware can involve multiple techniques. Some damage can be repaired by replacing parts in the hard disk. This alone may make the disk usable, but there may still be logical damage. A specialized disk-imaging procedure is used to recover every readable bit from the surface. Once this image is acquired and saved on a reliable medium, the image can be safely analysed for logical damage and will possibly allow for much of the original file system to be reconstructed.
Hardware repair
Examples of physical recovery procedures are: removing a damaged PCB (printed circuit board) and replacing it with a matching PCB from a healthy drive, performing a live PCB swap (in which the System Area of the HDD is damaged on the target drive which is then instead read from the donor drive, the PCB then disconnected while still under power and transferred to the target drive), read/write head assembly with matching parts from a healthy drive, removing the hard disk platters from the original damaged drive and installing them into a healthy drive, and often a combination of all of these procedures. Some data recovery companies have procedures that are highly technical in nature and are not recommended for an untrained individual. Each of them will void the manufacturer's warranty. For companies who will not void a warranty, see companies such as Ontrack, SalvageData, and DriveSavers.
Recovering from non-hardware damage
Overwritten data
When data have been physically overwritten on a hard disk it is generally assumed that the previous data are no longer possible to recover. In 1996, Peter Gutmann, a respected computer scientist,[citation needed] presented a paper that suggested overwritten data could be recovered through the use of Scanning transmission electron microscopy.[1] In 2001, he presented another paper on a similar topic.[2] Substantial criticism has followed, primarily dealing with the lack of any concrete examples of significant amounts of overwritten data being recovered.[3][4] To guard against this type of data recovery, he and Colin Plumb designed the Gutmann method, which is used by several disk scrubbing software packages.
Although Gutmann's theory may be correct, there's no practical evidence that overwritten data can be recovered. Moreover, there are good reasons to think that it cannot.[5][6][7]
Corrupt filesystems
In some cases, data on a hard drive can be unreadable due to damage to the filesystem. In the majority of these cases, at least a portion of the original data can be recovered by repairing the damaged filesystem using specialized data recovery software. This type of data recovery can be performed by knowledgeable end-users as it requires no special physical equipment. However, more serious cases can still require expert intervention.
See also
External links
References
- ^ Secure Deletion of Data from Magnetic and Solid-State Memory, Peter Gutmann, Department of Computer Science, University of Auckland
- ^ Data Remanence in Semiconductor Devices, Peter Gutmann, IBM T.J. Watson Research Center
- ^ Feenberg, Daniel (14 May 2004). "Can Intelligence Agencies Read Overwritten Data? A response to Gutmann". National Bureau of Economic Research. Retrieved 2008-05-21.
- ^ Data Removal and Erasure from Hard Disk Drives
- ^ "Disk Wiping – One Pass is Enough". 2009-03-17.
- ^ "Disk Wiping – One Pass is Enough – Part 2 (this time with screenshots)". 2009-03-18.
- ^ Wright, Dr. Craig (2009-01-15). "Overwriting Hard Drive Data".
Further reading
- Tanenbaum, A. & Woodhull, A. S. (1997). Operating Systems: Design And Implementation, 2nd ed. New York: Prentice Hall.
- What To Do When Windows Vista Crashes: Little-Known Recovery Strategies, from Information Week