Year
|
Model
|
Details
|
Kit #
|
1984
|
Original RC10
|
- Heat treated, gold anodized aircraft aluminum chassis tub.
- Replaceable gold anodized nose (skid) plate.
- Adjustable wheelbase.
- Two spring sets, low and high rate.
- High volume hydraulic shocks, double O-ring sealed, gold anodized.
- Adjustable limited-slip ball dif (can be locked for production class)
- Servo saver, linkage and universal servo mounts fit most radios.
- Prefabricated oilite bushings throughout (except ball bearing kits).
- Quick-change battery and body mounting hardware.
- High traction pneumatic tires, knobby rears, grooved fronts.
- High-impact nylon rear rims fit Associated and Tamiya "Holiday" tires.
- Quick-change knock-off rear hubs are key-locked to the axle.
- High-impact nylon front rims. Adapters are included for Tamiya front tires.
- Quality screws throughout. Allen cap, button, flat heat, and aluminum flat head.
- Step-by-step assembly instructions, with photos of every step.
In addition, some kits include all or part of the following:
- Yokomo stock class 05 motor.
- Heavy-duty throttle resistor, wiper, bypass, and mounting bracket.
- 16 gauge silicon wiring harness, with dropping diodes for radio.
- Durable clear Lexan body shell, with driver and adjustable wing.
- 6-cell Ni-Cd pack and Fast-charge Cord.
- Precision ball bearing set, 16 bearings total.
|
- 6000 Basic kit, less all electrical, less bearings $188.00
- 6010 Full kit, less battery, less bearings $225.00
- 6012 Full kit, less battery, body, wing, bearings $215.00
- 6016 Full kit, ball bearings, less battery $290.00
- 6020 Full kit, with battery pack, less bearings $265.00
|
1989
|
RC10 Graphite
|
- Graphite chassis
- Universal swingshafts
- Wide front arms
- New front shock tower
- New steering blocks
- New idler gears
- Turnbuckles
|
- 6025 bushings
- 6030 bearings
|
1990
|
RC10 Championship Edition (CE)
|
- Original aluminum chassis
- Original 6-gear tranny
- 3 piece wheels
- Bushings
|
|
1990
|
RC10 Team Car
|
- Stealth tranny
- Hard anodized shocks
- Universal swingshafts
- 1 piece wheels
- Bearings
|
- 6035 black aluminum chassis
- 6036 graphite chassis
|
1991
|
RC10 T
|
- Original truck
- Bushings
- Dogbones
- MSC and motor included
|
|
1992
|
RC10 Championship Edition (CE) Updated
|
- Updated to include Stealth tranny
- Aluminum chassis (black?)
- Bushings
|
|
1993
|
RC10 T Team Truck
|
- Hard anodized shocks
- Bearings
- Universal swingshafts
|
|
1993
|
RC10 GT
|
- Nitro truck
- Borrows many parts from RC10 T
- New tranny w/ 2.60 ratio
|
- 7050 Basic Sport Truck, bushings, requires *
- 7055 Basic Sport Truck, bushings, pull start engines
- 7060 Team Truck, bearings, requires *
- 7065 Team Truck, bearings, for pull start engines
- 7066 Team Truck, bearings, for non pull start engines
- 7680 Engine Installation Pack, bushing clutch, pull start*
- 7681 Engine Installation Pack, for pull start engines*
- 7683 Engine Installation Pack, for non pull start engines*
|
1994
|
RC10 Worlds Car
|
- 2.25 Stealth tranny
- Milled black chassis
- Primarily made w/ new black parts
- Yellow wheels
- New F & R shock towers
- New rear hub carriers
- New bellcranks w/ bushings
|
|
1995
|
RC10B2
|
- 2.40 stealth tranny
- Composite chassis
- Bearings
|
|
1995
|
RC10T2
|
- 2.60 Stealth tranny
- Hard anodized aluminum chassis
- Bearings
|
|
1996
|
RC10 DS (Dual Sport)
|
- AE's first sedan
- Short arms, shock towers, shocks
- Original, black aluminum chassis
|
- 8080 Sport kit, Mustang body, bushings, motor, MSC
- 8081 Sport kit, Mercedes body, bushings, motor, MSC
- 8085 Racer kit, no body, w/ bearings,
- 8089 Conversion kit, no body, req Worlds Car or older
|
1997
|
RC10B3
|
- The major difference between the B2 and the B3 is the suspension. The B3 has longer suspension arms, new caster blocks, steering blocks, hub carriers, and front shock tower. The chassis comes equipped for the optional use of front and rear sway bars. With all these parts the car has increased stability, which results in faster, more consistent driving.
|
- 9003 Basic version, bushings, no electrics
- 9013 Sport version, bushings, motor, MSC
- 9032 Team version, bearings, no electrics
- 9033 Team version, bearings, no electrics
- 9022 Convert B2 to B3, standard composite parts
- 9023 Convert B2 to B3, carbon fiber composite parts
|
1997
|
RC10T3
|
- Composite chassis
- New steering & castor blocks
|
- 7003 Basic version, bushings, no electrics
- 7013 Sport version, bushings, motor, MSC
- 7038 Team version, bearings, no electrics
|
1997
|
RC10 Nitro DS
|
- Nitro version of Dual Sport
|
|
1999
|
RC10 Nitro DS Qualifier
|
- Updated, higher performance version
|
- 8077 Camaro body
- 8078 Ford NAS truck body
|
1999
|
RC10 DS Qualifier
|
- Updated, higher performance version
|
- 8082 Ford NAS truck body
- 8083 Camaro body
|
2000
|
RC10B3 Factory Team
|
- New aluminum parts
- Carbon composite parts
|
|
2000
|
RC10T3
|
|
- 7009 "Team Built", bearings, not RTR
- 7010 Factory pre-assembled, radio, electronics, bushings
- 7048 Factory Team version
|
2000
|
RC10GT
|
- Updated version
- New flat chassis
|
- 7050 "Team Built", for pull start engine
- 7051 "Team Built", for non pull start engines
- 7060 Factory Team, non pull start
- 7061 Factory Team, pull start
- 7067 Team Kit, for pull start engines
- 7068 Team Kit, for non pull start engines
- 7090 Ready To Run (RTR)
- 7091 Ready To Run (RTR)
|
2003
|
RC10B4
|
Complete redesign of the RC10
- 2.6 transmission ratio
- Longer rear CVD
- All four of the B4's suspension arms are the same length
- Hinge pins are "captured," eliminating E-clips
- Angled bell-crank steering minimizes bump steer and maintains correct buggy Ackermann angles throughout the full range of suspension travel
- Accepts trailing and inline front axles for more tuning options
- Front tires are wider
- Wheels are stiffer and more responsive
Factory Team includes:
- Heavy Duty Servo Saver Spring
- Steering Rack Bearings
- Center Drilled Trailing Front Axle
- Titanium Turnbuckles
- Lightweight Outdrive Set
- Threaded Hard-anodized Shock Bodies, .89" and 1.18" stroke
- Gold Shock Shafts, .71" and 1.02" stroke
- Blue titanium turnbuckles
- Aluminum servo Saver Bolt
- Aluminum Front Hinge Pin Brace
- Aluminum Milled Motor Plate
- Aluminum Rear Axle Wheel Spacers
- Aluminum Shock Pivot Balls
- Aluminum Servo Mounts
- Aluminum Servo Mount Screws
- Aluminum 8-32 Locknuts
- Aluminum Body Clips
- Graphite/Carbon Top Plate
- Graphite/Carbon Chassis
- Graphite/Carbon Front & Rear A-Arms
- Graphite/Carbon Front & Rear Shock Towers
- Graphite/Carbon Rear Chassis Brace
- Graphite/Carbon Battery Strap, woven graphite
|
- 9034
- 9035 Factory Team B4
|
2003
|
RC10B4 RTR
|
|
|
2003
|
RC10T4
|
|
|
2003
|
RC10T4 RTR
|
|
|
2005
|
RC10B4 SE
|
|
|
2005
|
RC10T4 SE
|
|
|
- 12/18/2009 (Brushless)
- 01/22/2010 (Brushed)
|
RC10B4.1 (RTR)
|
Brushless:
- XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo
- XP SC450-BL Brushless electronic speed control with LiPo cutoff, forward and reverse with reverse lock out
- Reedy 3300kV brushless motor
- 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
- Molded composite low-CG chassis with set-screw antenna tube lock
- Blue aluminum shock bodies with molded pre-load clips
- Battery strap with twist-lock thumb knobs
- Rugged steel turnbuckles for adjustable camber and front toe-in
- Angled bellcrank “co-planar” steering with built in servo saver
- Vertical ball ends for roll center adjustments, front and rear
- Factory finished Interceptor 2.0 polycarbonate body
- Pre-mounted tires on white dish wheels
Brushed:
- XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo
- XP SC200 electronic speed control with LiPo cutoff, forward and reverse with reverse lock out
- Reedy 17-turn motor
- 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
- Molded composite low-CG chassis with set-screw antenna tube lock
- Blue aluminum shock bodies with molded pre-load clips
- Battery strap with twist-lock thumb knobs
- Rugged steel turnbuckles for adjustable camber and front toe-in
- Angled bellcrank "co-planar" steering with built in servo saver
- Vertical ball ends for roll center adjustments, front and rear
- Factory finished Interceptor 2.0 polycarbonate body
- Pre-mounted tires on white dish wheels
|
- ASC9038 (brushed)
- ASC9039 (brushless)
|
07/06/2010
|
RC10B4.1 (Factory Team)
|
- Factory Team 0.5° aluminum rear hubs with oversized outer bearing
- Ball differential with lightweight outdrives
- Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
- V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
- Pro-Line Vortex body and wing
- Pro-Line M3 Holeshot 2.0 rear and M3 4-rib front tires
- CVA drive shafts with pin retainer clips
- Durable steel center-drilled front axles
- Carbon-fiber battery strap with blue aluminum thumb screws
- Optimized suspension setup for use with LiPo batteries
- Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
- Blue titanium turnbuckles
- Complete set of precision ball bearings
- Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts
|
ASC9036
|
12/17/2009
|
RC10T4.1 (RTR)
|
Brushed:
- XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo
- XP SC200 electronic speed control with LiPo cutoff, forward and reverse with reverse lock out
- Reedy 17-turn motor
- 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
- Molded composite low-CG chassis with set-screw antenna tube lock
- Blue aluminum shock bodies with molded pre-load clips
- Battery strap with twist-lock thumb knobs
- Rugged steel turnbuckles for adjustable camber and front toe-in
- Angled bellcrank "co-planar" steering with built in servo saver
- Vertical ball ends for roll center adjustments, front and rear
- Pre-mounted tires on white dish wheels
- Factory finished Interceptor-T polycarbonate body
Brushless:
- XP3-SS 2.4 GHz 3-channel radio system with SHV1504MG metal gear servo
- XP SC450-BL Brushless electronic speed control with LiPo cutoff, forward and reverse with reverse lock out
- Reedy 3300kV brushless motor
- 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
- Molded composite low-CG chassis with set-screw antenna tube lock
- Blue aluminum shock bodies with molded pre-load clips
- Battery strap with twist-lock thumb knobs
- Rugged steel turnbuckles for adjustable camber and front toe-in
- Angled bellcrank "co-planar" steering with built in servo saver
- Vertical ball ends for roll center adjustments, front and rear
- Pre-mounted tires on white dish wheels
- Factory finished Interceptor-T polycarbonate body
|
- ASC7037 (Brushless)
- ASC7036 (Brushed)
|
07/02/2010
|
RC10T4.1 (Factory Team)
|
- Factory Team 0.5° aluminum rear hubs with oversized outer bearing
- Ball differential with lightweight outdrives
- Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
- V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
- JConcepts Hi-Flow T4 body
- JConcepts Double-Dees rear tires in green compound and Carvers front tires in blue compound
- CVA joints with pin retainer clips
- Carbon fiber battery strap with blue aluminum thumb screws
- Blue titanium turnbuckles
- Optimized suspension setup for use with LiPo batteries
- Suspension mounts for 4.0°, 3.5°, 3.0°, and 2.5° rear toe included
- Complete set of precision ball bearings
- Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts
|
ASC7023
|