Jump to content

LED-embedded glass

Add links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dshavit (talk | contribs) at 20:23, 23 December 2010. The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.


Transparent LED embedded glass is a new composite material containing light emitting diodes (LED). It is used as building material and as glass type for many different products. This article is focussing on published[1],[2]. specifications enabling building materials which will meet security and legislation aspects of laminated glass.

  • LED embedded film for semitransparent glass application
    LED embedded film for semitransparent glass application
  • Cuttable LED Strips
    Cuttable LED Strips
  • Full colour RGB LED-film laminated to 1x1 m floor glass
    Full colour RGB LED-film laminated to 1x1 m floor glass
  • LED glass stair
    LED glass stair

Composite specification

The LED Glass composite material may consist of using transparent metallized glass[3] as electricity conductor. In this case the final composite specification will be:

  • Top Layer:...Standard glass
  • Interlayer:...Transparent thermoplastic material like TPU, PVB or EVA
  • Interlayer:..LED (light emitting diodes)
  • Bottom layer:...Metallised bottom glass

Thermoplastics used

The transparent thermoplastic material will usually show a quite similar light refractive index compared to glass. Typical thermoplastics used in the glass industry to produce these type of security glazings will consist of Thermoplastic Polyurethane[4] (TPU), Ethyl-Vinyl-Acetate[5] (EVA) or Poly-Vinyl-Butyral[6] (PVB).

Production

The specification mentioned above will typically be produced in following steps:

  1. Vacuum sputtering of transparent conductive material on glass
  2. Cutting the glass to the final size
  3. Laser ablation of parts of the conductive material
  4. Mounting SMD LEDs on the glass by means of a pick & place process
  5. Lamination of the glasses according the specification mentioned above

Due to the fact, that most of the glass companies are not skilled to mount LEDs (Light Emitting Diodes) onto metallized glass, it makes sense to locate the LEDs on a separate transparent conductive polymeric interlayer[7],[8],[9] which may be laminated by any glass lamination unit. In other words, the remaining process for glass lamination units will consist of laminating together standard glass using 2 layers of thermoplastic interlayers to sandwich ready to use LED embedded films[10]. The final specification will be:

  • Top Layer:..Glass
  • Interlayer:..Transparent thermoplastic material like TPU, PVB or EVA
  • Interlayer:..LED (light emitting diodes)on transparent conductive Polymer
  • Interlayer:..Transparent thermoplastic material like TPU, PVB or EVA
  • Bottom layer:..Glass

Within this last specification mentioned above, the 2 thermoplastic layers together with the LED Interlayer[11] will reach a total thickness of about 2mm. The 2 thermoplastic interlayers have a high adhesion to stone, wood, metals, foam, fabric and many Polymers. So they may be used to produce different products outside the typical glass business.

References

  1. ^ D. Shavit: Transparent Electronic Interlayers, Proceedings of GPD Glass Performance Days, June 2009, Page 177-180
  2. ^ D. Shavit: LED- and SMD embedded Polyester Interlayer Film for Lighting, Sensoric and functional Glass, Poster Session at GPD Glass Performance Days, June 2007, Page 28
  3. ^ Hahn, T., EP0900971A1 "Lighting device containing LEDs on glass"
  4. ^ Bayer Inc., US2006135728 "Thermoplastic polyurethane (TPU) having good adhesion to glass "
  5. ^ Bridgestone Inc., DE4308885(B4) "Laminated glass with thermoset film of (meth)acrylate or hydrocarbon resin - containing EVA and organic peroxide for high impact strength, penetration resistance and transparency "
  6. ^ Solutia Inc., WO03057478 "GLASS LAMINATION PROCESS AND APPARATUS"
  7. ^ D. Shavit: The developments of LEDs and SMD Electronics on transparent conductive Polyester film, Vacuum International, 1/2007, S. 35 ff
  8. ^ D. Shavit: Elektronische Komponenten in Glaslaminaten: Entwicklung, Stand und Ausblick, Glas, Architektur & Technik, 1/2007
  9. ^ SUN-TEC Swiss United Technologies Inc. Daniel Shavit, DE202007008410"Translucent conductive Interlayer with SMD Surface Mounted Electronic Devices - LED embedded films"
  10. ^ http://www.ledfilm.ch/ledfilm
  11. ^ http://www.ledglass.ch/ledglass
Retrieved from "https://en.wikipedia.org/w/index.php?title=LED-embedded_glass&oldid=403922123"