Gibson Thunderbird
The Gibson Thunderbird is an electric bass guitar made by Gibson.
Thunderbird Bass | |
---|---|
Manufacturer | Gibson |
Period | 1963 — present |
Construction | |
Body type | Solid |
Neck joint | Neck Thru |
Woods | |
Body | Mahogony |
Neck | Maple or Mahogony |
Fretboard | rosewood or ebony |
Hardware | |
Bridge | Fixed |
Pickup(s) | Bass Humbuckers |
Colors available | |
Vintage Sunburst or Alpine white, Ebony and Metallic Red in Limited Edition Models. |
Background and introduction
The Gibson Thunderbird was introduced in 1963. At the time, Fender had been the leader in the electric bass market since their introduction of the Precision Bass twelve years earlier.
The Thunderbird was designed by U.S. auto designer Raymond H. Dietrich (Chrysler, Lincoln, Checker) along with the Firebird guitar, which it resembles in design, construction, and name.
Design and construction
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/41/Josh_Reedy_Decemberadio.jpg/250px-Josh_Reedy_Decemberadio.jpg)
The Thunderbird bass, like the Rickenbacker 4000 series, and like the Firebird guitar it was designed concurrently with, had neck-through construction, where the neck wood went through the entire length of the body, with the rest of the body being glued into place.
While previous Gibson bass guitars had a short scale of 30½", the Thunderbird had a 34" scale equal to that of the 34" scale of Fender's bass guitars.
There were originally two Thunderbird models, the Thunderbird II (one pickup) and Thunderbird IV (two pickups)
Non-Reverse Thunderbirds
In 1966, Gibson changed the Thunderbird's design and construction. The original Thunderbirds (and Firebirds) had a "reverse" body, with the treble horn extended and the bass horn recessed. Due to a lawsuit brought by Fender because of the resemblance to the Fender Jazzmaster, the body styles were modified, with the result being called the "non-reverse" body.[1] Also, the sturdy but expensive neck-through construction was replaced by traditional Gibson set-neck construction. The non-reverse Thunderbird was continued until 1969, when the Thunderbird was discontinued. Though fewer non-reverse Thunderbirds were shipped, the original reverse-body instruments retain a higher collector's value.
1976-79 Reissue
The Thunderbird IV was reissued in 1976 as a bicentennial edition. This reissue featured the original body shape and neck-through construction. After the bicentennial, the Thunderbird was continued as a regular production model until 1979, when it was discontinued again.
Current Thunderbird models
The Thunderbird IV was re-introduced to the Gibson line in 1987 and has been in production up to the present.
The current official Thunderbirds produced by Gibson Guitar Corporation are:
- Gibson USA Thunderbird IV
- Gibson USA Nikki Sixx Thunderbird Bass
- Epiphone Thunderbird IV
- Epiphone Nikki Sixx Blackbird
- Epiphone Goth Thunderbird IV
- Epiphone Special Run Thunderbird IV Limited Edition Silverburst
- Epiphone Thunderbird Pro IV
- Epiphone Thunderbird Pro V
All 8 currently produced models have two pickups and reverse-style bodies.
The current Gibson Thunderbird IV is made with a nine-ply mahogany/walnut neck-through with mahogany wings attached to form the body, and is finished in Vintage Sunburst.
The Nixxi Sixx Thunderbird Bass is made with a mahogany/walnut neck-through with Flame Maple body wings attached to form the body, finished in transparent Black Cherry. The fretboard is inlayed with red acrylic "X"s at the third, fifth, seventh and 12th frets.
The Gibson Thunderbird Studio models (which were also available as five-string versions) have mahogany necks set into mahogany bodies. This model was discontinued in 2007.
The Epiphone Thunderbird IV, a budget alternative to the Gibson models, has a maple bolt-on construction onto an alder body, and is finished in Vintage Sunburst, Ebony, Metallic Red & Pelham Blue.
The Epiphone Goth Thunderbird is similar to the Epiphone Thunderbird IV. However, it has a mahogany body, a Celtic Cross symbol on the pickguard, and is finished in a 'Pitch Black' non-gloss flat finish.
The Epiphone Thunderbird IV Limited Edition, a budget alternative to the Gibson models, has a maple neck bolted onto an alder body. Alpine White finish with black hardware and assembled at the Epiphone Custom Shop in Korea. This model is currently no longer produced.
The Epiphone Special Run Thunderbird-IV Limited Edition Silverburst is also an Epiphone alternative to the Gibson model with a Maple neck and Rosewood fretboard bolted onto a Mahogany body (as opposed to the standard Epiphone Alder body) which gives it a much closer tonality to the Gibson Thunderbirds, which use Mahogany as a major wood in the construction of the bass. Chrome hardware is used (tuners, pickup covers, bridge, and screws) as opposed to the standard Epiphone black hardware, differently-shaped pickups compared to the Epiphone and Gibson Thunderbirds (much closer to the "classic" pickups of the 1960s and '70s) and a special "Silverburst" finish.
The Epiphone Thunderbird Pro IV has a seven-piece (Walnut/Maple/Walnut/Maple/Walnut/Maple/Walnut) neck with neck-through construction. It also has the Epiphone T-Pro bass humbucking pickups with custom active electronics and EQ.
The Epiphone Thunderbird Pro V is the five-string version of the Thunderbird Pro IV. It also has a seven-piece neck, a neck-through construction, Epiphone T-Pro pickups and active electronics.
The Thunderbird bass has a very high output pickups, which despite being passive produce a stronger signal than many active basses such as the Fender Deluxe Jazz Bass. Gibson does not sell replacement pickups for the Thunderbird, as they are said to be indestructible. [citation needed]
Fenderbird
The Who's John Entwistle switched to Thunderbird IV basses from 1971–1974, but was dissatisfied with the neck. He bought several Thunderbird basses after the model was discontinued and gutted them. He then had several bodies cut to the original shape, attached Fender Telecaster Bass necks to them, and installed the salvaged hardware.
Gibson Blackbird
The Gibson Blackbird was a custom Thunderbird model made to specifications requested by Mötley Crüe bassist Nikki Sixx. Originally to be named the "Sixxbird", the Blackbird was manufactured from 2000 to 2003. It differed from the Thunderbird IV in the following details:
- The fingerboard was made from ebony and had iron cross inlays.
- An "opti grab" handle was added to the normal Thunderbird bridge,
- The only electronic control was a single on/off switch for the two humbucker pickups.
- The pickguard was designed specifically for the Blackbird
- All hardware on the Blackbird were finished in black chrome.
- The Blackbird had a flat-black finish.
- The pickups were renamed as 'Deep Sixx' pickups.
Notable Thunderbird players
See:
References
- ^ "1966 Gibson Thunderbird bass". Gibsonbass.com. 1965-06-22. Retrieved 2009-11-09.
External links
- Gibson Thunderbird– Information, sound clips, catalogue appearance and pictures of the Gibson Thunderbird.
- Gibson Blackbird– Information, and pictures of the Gibson Blackbird.