Jump to content

Socket 478

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 131.191.67.168 (talk) at 00:13, 2 March 2006 (Added info about core duo's). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Socket 478
TypePGA-ZIF
Chip form factorsFlip-chip pin grid array (FC-PGA2)
Contacts478
FSB protocolAGTL+
FSB frequency100 MHz (Quadpumped), FSB400
133 MHz (Quadpumped), FSB533
200 MHz (Quadpumped), FSB800
ProcessorsIntel Pentium 4 (1.600 - 3.400 GHz)
Intel Celeron (1.700 - 3.200 GHz )
Celeron D (to 3.2 GHz
Intel Pentium 4 Extreme Edition (3.200, 3.400 GHz)
Core Duo

This article is part of the CPU socket series

In computing, Socket 478 is a type of CPU socket used for Intel's Pentium 4 and Celeron series CPUs. Socket 478 is being phased out with the launch of LGA 775. (LGA stands for Land Grid Array, referring to the fact that the pins are on the motherboard.)

Socket 478 has been used for all of the Northwood Pentium 4s and Celerons, the first Prescott Pentium 4s, and some Willamette Celerons and Pentium 4s. Socket 478 also supports newer Prescott Celeron Ds, and early Pentium 4 Extreme Edition processors with 2MB of L3 cache and some Core Duos. The socket was launched with the Northwood core to combat AMD's 462-pin Socket A and their Athlon XP processors. Socket 478, which accommodates high- and low-end processors, was also the replacement for Socket 423, a Willamette processor socket that did not have a long life.