Jump to content

Flexible stone

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Mo ainm (talk | contribs) at 22:38, 1 July 2016 (Reverted to revision 727894056 by Iamilona (talk): Restore speedy template . (TW)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Flexible Brick by Delap

== Flexible Stone and Brick The Flexible Stone and Brick are consisting of marble chips and acrylic resin. Marble is the second most durable natural mineral, after diamonds. Acrylic resin is used in the construction of yachts and aircraft parts. These two materials combined produce a high quality material for cladding façades of houses and buildings with at least 30 years of service life.

The Flexible Brick is not only elastic, but also lightweight so that the façade is not burdened with a heavy load. The Flexible Brick can be installed on any uneven surface, as well as square corners and pillars. And most interestingly, the Flexible Brick can be cut with scissors! The product is glued on Thin Set and can be used with out the grouting.

The Flexible Brick solves many problems simultaneously: it does not require any component parts, it is lightweight, which cuts logistical costs, it requires very little tile adhesive, it has a protective coating for troweling, it is simple to install, its application does not produce any waste products, and it is fire and ultra-violet resistant.


The Flexible Stone and Brick are consisting of marble chips and acrylic resin. Marble is the second most durable natural mineral, after diamonds. Acrylic resin is used in the construction of yachts and aircraft parts. These two materials combined produce a high quality material for cladding façades of houses and buildings with at least 30 years of service life.

The Flexible Brick is not only elastic, but also lightweight so that the façade is not burdened with a heavy load. The Flexible Brick can be installed on any uneven surface, as well as square corners and pillars. And most interestingly, the Flexible Brick can be cut with scissors. The product is glued on Thin Set and can be used with out the grouting.

The Flexible Brick solves many problems simultaneously: it does not require any component parts, it is lightweight, which cuts logistical costs, it requires very little tile adhesive, it has a protective coating for troweling, it is simple to install, its application does not produce any waste products, and it is fire and ultra-violet resistant.

Advantages:

  • Elasticity and lightness
  • Seismological capabilities
  • Ability to be laid on any uneven surface. This significantly reduces pre-installation work and the budget
  • Lighter poundage
  • The thickness of the stone is 4 mm (0,16 in)
  • Can be cut with scissors. No special equipment
  • Special protective paper on the stone face
  • Resistance to atmospheric precipitate.
  • Stable to UV-light
  • The stone does not require grouting.
  • Adhesive consumption — 5 lb./ per 10 sq. ft.

Product Description

Type: Siding & Stone Veneer

Surface types: Columns, corner, basement, garage, inside/outside walls

Recommended Building:

  • Single-family homes;
  • Commercial and institutional buildings;
  • High-traffic areas of multifamily residential structures;
  • Buildings requiring a high fire rating;

Backup: concrete, masonry, wallboard, plywood, drywall, concrete block + metal

Thickness of stone: 0, 16 in (4mm.)