This is an old revision of this page, as edited by Kebl0155(talk | contribs) at 13:41, 11 January 2017(Deleted assertion that: "The initial requirement that the first operand refers to the velocity of a ''frame'' is nowhere used", as it was used as the initial requirement. The lesser requirement that v is colinear with x is what has been dropped.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Revision as of 13:41, 11 January 2017 by Kebl0155(talk | contribs)(Deleted assertion that: "The initial requirement that the first operand refers to the velocity of a ''frame'' is nowhere used", as it was used as the initial requirement. The lesser requirement that v is colinear with x is what has been dropped.)
The special theory of relativity, formulated in 1905 by Albert Einstein, implies that addition of velocities does not behave in accordance with simple vector addition.
In relativistic physics, a velocity-addition formula is a 3-dimensional equation that relates the velocities of objects in different reference frames. Such formulas apply to successive Lorentz transformations, so they also relate different frames. Accompanying velocity addition is a kinematic effect known as Thomas precession, whereby successive non-collinear Lorentz boosts become equivalent to the composition of a rotation of the coordinate system and a boost.
The notation employs u as velocity of a body within a Lorentz frame S, and v as velocity of a second frame S′, as measured in S, and u′ as the transformed velocity of the body within the second frame.
History
The speed of light in the fluid is slower than the speed of light in vacuum, and it changes if the fluid is moving along with the light. In 1851, Fizeaumeasured the speed of light in a fluid moving parallel to the light using a Michelson interferometer. Fizeau's results were not in accord with the then prevalent theories. Fizeau experimentally correctly determined the zeroth term of an expansion of the relativistically correct addition law in terms of V⁄c as is described below. Fizeau's result led physicists to accept the empirical validity of the rather unsatisfactory theory by Fresnel that a fluid moving with respect to the stationary aether partially drags light with it, i.e. the speed is c + (1 − 1⁄n2)V instead of c + V, where c is the speed of light in the aether, and V is the speed of the fluid with respect to the aether.
The aberration of light, of which the easiest explanation is the relativistic velocity addition formula, together with Fizeau's result, triggered the development of theories like Lorentz aether theory of electromagnetism in 1892. In 1905 Albert Einstein, with the advent of special relativity, derived the standard configuration formula (V in the x-direction) for the addition of relativistic velocities.[2] The issues involving aether were, gradually over the years, settled in favor of special relativity.
Galilean relativity
It was observed by Galilei that a person on a uniformly moving ship has the impression of being at rest and sees a heavy body falling vertically downward.[3] This observation is now regarded as the first clear statement of the principle of mechanical relativity. Galilei saw that from the point of view of a person standing on the shore, the motion of falling downwards on the ship would be combined with, or added to, the forward motion of the ship.[4] In terms of velocities it can be said that the velocity of the falling body relative to the shore equals the velocity of that body relative to ship plus the velocity of the ship relative to the shore.
In general for three objects A (e.g. Galilei on the shore), B (e.g. ship), C (e.g. falling body on ship) the velocity vector of C relative to A (velocity of falling object as Galilei sees it) is the sum of the velocity of C relative to B (velocity of falling object relative to ship) plus the velocity v of B relative to A (ship's velocity away from the shore). The addition here is the vector addition of vector algebra and the resulting velocity is usually represented in the form
According to the theory of special relativity, the frame of the ship has a different clock rate and distance measure, and the notion of simultaneity in the direction of motion is altered, so the addition law for velocities is changed. This change is not noticeable at low velocities but as the velocity increases towards the speed of light it becomes important. The addition law is also called a composition law for velocities. For collinear motions, the speed of the object (e.g. a cannonball fired horizontally out to sea) as measured from the ship would be measured by someone standing on the shore and watching the whole scene through a telescope as
The composition formula can take an algebraically equivalent form, which can be easily derived by using only the principle of constancy of the speed of light,[5]
The formulas for boosts in the standard configuration follow most straightforwardly from taking differentials of the inverse Lorentz boost in standard configuration.[6][7] If the primed frame is travelling with speed v with Lorentz factor in the positive x-direction relative to the unprimed frame, then the differentials are
Divide the first three equations by the fourth,
or
which is
Transformation of velocity (Cartesian components)
in which expressions for the primed velocities were obtained using the standard recipe by replacing v by –v and swapping primed and unprimed coordinates. If coordinates are chosen so that all velocities lie in a (common) x–y plane, then velocities may be expressed as
Since a relativistic transformation rotates space and time into each other much as geometric rotations in the plane rotate the x- and y-axes, it is convenient to use the same units for space and time, otherwise a unit conversion factor appears throughout relativistic formulae, being the speed of light. In a system where lengths and times are measured in the same units, the speed of light is dimensionless and equal to 1. A velocity is then expressed as fraction of the speed of light.
To find the relativistic transformation law, it is useful to introduce the four-velocities V = (V0, V1, 0, 0), which is the motion of the ship away from the shore, as measured from the shore, and U = (U0, U1, U2, U3) which is the motion of the fly away from the ship, as measured from the ship. The four-velocity is defined to be a four-vector with relativistic length equal to 1, future-directed and tangent to the world line of the object in spacetime. Here, V0 corresponds to the time component and V1 to the x component of the ship's velocity as seen from the shore. It is convenient to take the x-axis to be the direction of motion of the ship away from the shore, and the y-axis so that the x–y plane is the plane spanned by the motion of the ship and the fly. This results in several components of the velocities being zero; V2 = V3 = U3 = 0.
The ordinary velocity is the ratio of the rate at which the space coordinates are increasing to the rate at which the time coordinate is increasing,
Since the relativistic length of V is 1,
so
The Lorentz transformation matrix that converts velocities measured in the ship frame to the shore frame is the inverse of the transformation described on the Lorentz transformation page, so the minus signs that appear there must be inverted here:
This matrix rotates the a pure time-axis vector (1, 0, 0, 0) to (V0, V1, 0, 0), and all its columns are relativistically orthogonal to one another, so it defines a Lorentz transformation.
If a fly is moving with four-velocity U in the ship frame, and it is boosted by multiplying by the matrix above, the new four-velocity in the shore frame is S = (S0, S1, S2, S3),
Dividing by the time component S0 and substituting for the components of the four-vectors U and V in terms of the components of the three-vectors u and v gives the relativistic composition law as
The form of the relativistic composition law can be understood as an effect of the failure of simultaneity at a distance. For the parallel component, the time dilation decreases the speed, the length contraction increases it, and the two effects cancel out. The failure of simultaneity means that the fly is changing simultaneity slices as the projection of u onto v. Since this effect is entirely due to the time slicing, the same factor multiplies the perpendicular component, but for the perpendicular component there is no length contraction, so the time dilation multiplies by a factor of 1⁄V0 = √(1 − v12).
General configuration
Decomposition of 3-velocity u into parallel and perpendicular components, and calculation of the components. The procedure for u′ is identical.
Starting from the expression in coordinates for v parallel to the x-axis, expressions for the perpendicular and parallel components can be cast in vector form as follows, a trick which also works for Lorentz transformations of other 3d physical quantities originally in set up standard configuration. Introduce the velocity vector u in the unprimed frame and u′ in the primed frame, and split them into components parallel ( ∥ ) and perpendicular (⊥) to the relative velocity vector v (see hide box below) thus
which gives, using the results for the standard configuration,
where · is the dot product. Since these are vector equations, they still have the same form for v in any direction. The only difference from the coordinate expressions is that the above expressions refers to vectors, not components.
One obtains
where αv = 1/γv is the reciprocal of the Lorentz factor. The ordering of operands in the definition is chosen to coincide with that of the standard configuration from which the formula is derived.
The algebra
Decomposition into parallel and perpendicular components in terms of V
Either the parallel or the perpendicular component for each vector needs to be found, since the other component will be eliminated by substitution of the full vectors.
The parallel component of u′ can be found by projecting the full vector into the direction of the relative motion
and the perpendicular component of u'′ can be found by the geometric properties of the cross product (see figure above right),
In each case, v/v is a unit vector in the direction of relative motion.
The expressions for u|| and u⊥ can be found in the same way. Substituting the parallel component into
and in the forwards (v positive, S -> S') direction
where the last expression is by the standard vector analysis formulav × (v × u) = (v ⋅ u)v − (v ⋅ v)u. The first expression extends to any number of spatial dimensions, but the cross product is defined in three dimensions only. The objects A, B, C with B having velocity v relative to A and C having velocity u relative to B can be anything. In particular, they can be three frames, or they could be the laboratory, a decaying particle and one of the decay products of the decaying particle.
Properties
The relativistic addition of 3-velocities is non-linear
for any real numbersλ and μ, although it is true that
Also, due to the last terms, is in general neither commutative
It deserves special mention that if u and v refer to boost velocities, then bothu ⊕ v, and v ⊕ u are correct expressions for the combined boost velocity. They are just given in different coordinate systems, the unprimed and the (would be) doubly primed respectively in the old notation, related by a rotation. This is the phenomenon of Thomas precession, and is not dealt with further here.
Reverse formula found by using standard procedure of swapping v for -v and u for u′.
It is clear that the non-commutativity manifests itself as an additional rotation of the coordinate frame when two boosts are involved, since the norm squared is the same for both orders of boosts.
The gamma factors for the combined velocities are computed as
Click for detailed proof
Reverse formula found by using standard procedure of swapping v for -v and u for u′.
Notational conventions
Notations and conventions for the velocity addition vary from author to author. Different symbols may be used for the operation, or for the velocities involved, and the operands may be switched for the same expression, or the symbols may be switched for the same velocity. A completely separate symbol may also be used for the transformed velocity, rather than the prime used here. Since the velocity addition is non-commutative, one cannot switch the operands or symbols without changing the result.
Some classical applications of velocity-addition formulas, to the Doppler shift, to the aberration of light, and to the dragging of light in moving water, yielding relativistically valid expressions for these phenomena are detailed below. It is also possible to use the velocity addition formula, assuming conservation of momentum (by appeal to ordinary rotational invariance), the correct form of the 3-vector part of the momentum four-vector, without resort to electromagnetism, or a priori not known to be valid, relativistic versions of the Lagrangian formalism. This involves experimentalist bouncing off relativistic billiard balls from each other. This is not detailed here, but see for reference Lewis & Tolman (1909)Wikisource version (primary source) and Sard (1970, Section 3.2).
Fizeau experiment
Hippolyte Fizeau (1819 – 1896), a French physicist, was in 1851 the first to measure the speed of light in flowing water.
When light propagates in a medium, its speed is reduced, in the rest frame of the medium, to cm = c⁄nm, where nm is the index of refraction of the medium m. The speed of light in a medium uniformly moving with speed V in the positive x-direction as measured in the lab frame is given directly by the velocity addition formulas. For the forward direction (standard configuration, drop index m on n) one gets,[12]
Collecting the largest contributions explicitly,
Fizeau found the first three terms.[13][14] The classical result is the first two terms.
Another basic application is to consider the deviation of light, i.e. change of its direction, when transforming to a new reference frame with parallel axes, called aberration of light. In this case, v′ = v = c, and insertion in the formula for tan θ yields
For this case one may also compute sin θ and cos θ from the standard formulae,[15]
Trigonometry
James Bradley (1693 – 1762) FRS, provided an explanation of aberration of light correct at the classical level,[16] at odds with the later theories prevailing in the nineteenth century based on the existence of aether.
the trigonometric manipulations essentially being identical in the cos case to the manipulations in the sin case. Consider the difference,
correct to order v⁄c. Employ in order to make small angle approximations a trigonometric formula,
where cos1/2(θ + θ′) ≈ cos θ′, sin1/2(θ − θ′) ≈ 1/2(θ − θ′) were used.
Thus the quantity
the classical aberration angle, is obtained in the limit V⁄c → 0.
Relativistic Doppler shift
Christian Doppler (1803–1853) was an Austrian mathematician and physicist who discovered that the observed frequency of a wave depends on the relative speed of the source and the observer.
Here velocity components will be used as opposed to speed for greater generality, and in order to avoid perhaps seemingly ad hoc introductions of minus signs. Minus signs occurring here will instead serve to illuminate features when speeds less than that of light are considered.
For light waves in vacuum, time dilation together with a simple geometrical observation alone suffices to calculate the Doppler shift in standard configuration (collinear relative velocity of emitter and observer as well of observed light wave).
All velocities in what follows are parallel to the common positive x-direction, so subscripts on velocity components are dropped. In the observers frame, introduce the geometrical observation
as the spatial distance, or wavelength, between two pulses (wave crests), where T is the time elapsed between the emission of two pulses. The time elapsed between the passage of two pulses at the same point in space is the time periodτ, and its inverse ν = 1⁄τ is the observed (temporal) frequency. The corresponding quantities in the emitters frame are endowed with primes.[17]
Suppose instead that the wave is not composed of light waves with speed c, but instead, for easy visualization, bullets fired from a relativistic machine gun, with velocity s′ in the frame of the emitter. Then, in general, the geometrical observation is precisely the same. But now, s′ ≠ s, and s is given by velocity addition,
The calculation is then essentially the same, except that here it is easier carried out upside down with τ = 1⁄ν instead of ν. One finds
Details in derivation
Observe that in the typical case, the s′ that enters is negative. The formula has general validity though.[nb 2] When s′ = −c, the formula reduces to the formula calculated directly for light waves above,
If the emitter is not firing bullets in empty space, but emitting waves in a medium, then the formula still applies, but now, it may be necessary to first calculate s′ from the velocity of the emitter relative to the medium.
Returning to the case of a light emitter, in the case the observer and emitter are not collinear, the result has little modification,[2][20][21]
where θ is the angle between the light emitter and the observer. This reduces to the previous result for collinear motion when θ = 0, but for transverse motion corresponding to θ = π/2, the frequency is shifted by the Lorentz factor. This does not happen in the classical optical Doppler effect.
Hyperbolic geometry
The addition law on collinear form is also the law of addition of hyperbolic tangents
where
which shows that the composition of collinear velocities is associative and commutative.
The quantities a and b (equal to the artanh of the velocities divided by c) are known as rapidities. The reason that the velocities are hyperbolic tangents is because the Lorentz transformation can be thought of as the application of a hyperbolic rotation through a hyperbolic angle which is the rapidity. Suppose the velocity of a line in space-time is the slope of the line, which is the hyperbolic tangent of the rapidity, just as the slope of the x-axis after a rotation is given by the tangent of the rotation angle. When a plane is successively rotated by two angles, the final rotation is by the sum of the two angles. So the final slope of the x-axis is the tangent of the sum of the two angles. In the same way, the slope of the time axis after two boosts is the hyperbolic tangent of the sum of the two rapidities.
The a and b of above can be thought of as being the radial coordinate on a 3-dimensional subspace with spherical coordinates, or the norm of a cartesian vector, of the Lie algebra of the Lorentz group spanned by the boost generators. This space is homeomorphic with ℝ3, and is mapped to the open unit ball B3 via[22]
where ζ is a 3-vector in the boost subspace, expressed in cartesian coordinates, called the boost parameter and its norm the rapidity. The line element in ℝ3 is given by[23]
Now introduce β through
with θ and φ the usual spherical angle coordinates, and the line element on the open unit ball becomes
^Note that s′ is negative in the sense for which that the problem is set up, i.e. emitter with positive velocity fires fast bullets towards observer in unprimed system. The convention is that −s > V should yield positive frequency in accordance with the result for the ultimate velocity, s = −c. Hence the minus sign is a convention, but a very natural convention, to the point of being canonical.
The formula may also result in negative frequencies. The interpretation then is that the bullets are approaching from the negative x-axis. This may have two causes. The emitter can have large positive velocity and be firing slow bullets. It can also be the case that the emitter has small negative velocity and is firing fast bullets. But if the emitter has a large negative velocity and is firing slow bullets, the frequency is again positive.
For some of these combination to make sense, it must be required that the emitter has been firing bullets for sufficiently long time, in the limit that the x-axis at any instant has equally spaced bullets everywhere.
Mermin, N. D. (2005). It's About Time: Understanding Einstein's Relativity. Princeton University Press. ISBN0-691-12201-6. {{cite book}}: Invalid |ref=harv (help)
{{cite journal|ref=harv|last=Mocanu|first=C.I.|title=On the relativistic velocity composition paradox and the Thomas rotation|journal=Found. Phys. Lett.|volume=5|issue=5|year=1992|pages=443–456|doi=10.1007/BF00690425|publisher=Kluwer Academic Publishers-Plenum Publishers|issn=0894-9875|url=http://link.springer.com/article/10.1007%
Parker, S. P. (1993). McGraw Hill Encyclopaedia of Physics (2nd ed.). McGraw Hill. ISBN978-0070514003. {{cite book}}: Invalid |ref=harv (help)
Sard, R. D. (1970). Relativistic Mechanics - Special Relativity and Classical Particle Dynamics. New York: W. A. Benjamin. ISBN978-0805384918. {{cite book}}: Invalid |ref=harv (help)
French, A.P. (1968). Special Relativity. MIT Introductory Physics Series. W.W. Norton & Company.
Historical
Bradley, James (1727–1728). "A Letter from the Reverend Mr. James Bradley Savilian Professor of Astronomy at Oxford, and F.R.S. to Dr.Edmond Halley Astronom. Reg. &c. Giving an Account of a New Discovered Motion of the Fix'd Stars". Phil. Trans. R. Soc. 35: 637–661. doi:10.1098/rstl.1727.0064. {{cite journal}}: |format= requires |url= (help); Invalid |ref=harv (help)
Galilei, G. (2001) [1632]. Dialogue Concerning the Two Chief World Systems [Dialogo sopra i due massimi sistemi del mondo]. Stillman Drake (Editor, Translator), Stephen Jay Gould (Editor), J. L. Heilbron (Introduction), Albert Einstein (Foreword). Modern Library. ISBN0-375-75766-X. {{cite book}}: Invalid |ref=harv (help)
Galilei, G. (1954) [1638]. Dialogues Concerning Two New Sciences [Discorsi e Dimostrazioni Matematiche Intorno a Due Nuove Scienze]. Henry Crew, Alfonso de Salvio (Translators). Digiread.com. ISBN1-4209-3815-0. {{cite book}}: Invalid |ref=harv (help)