Image fusion
In computer vision, Multisensor Image fusion is the process of combining relevant information from two or more images into a single image.[1] The resulting image will be more informative than any of the input images.[2]
In remote sensing applications, the increasing availability of space borne sensors gives a motivation for different image fusion algorithms. Several situations in image processing require high spatial and high spectral resolution in a single image. Most of the available equipment is not capable of providing such data convincingly. Image fusion techniques allow the integration of different information sources. The fused image can have complementary spatial and spectral resolution characteristics. However, the standard image fusion techniques can distort the spectral information of the multispectral data while merging.
In satellite imaging, two types of images are available. The panchromatic image acquired by satellites is transmitted with the maximum resolution available and the multispectral data are transmitted with coarser resolution. This will usually be two or four times lower. At the receiver station, the panchromatic image is merged with the multispectral data to convey more information.
Many methods exist to perform image fusion. The very basic one is the high pass filtering technique. Later techniques are based on Discrete Wavelet Transform, uniform rational filter bank, and Laplacian pyramid.
==Why Image higher mision relivatiom nysd data fusion has become a discipline which demands more general formal solutions to a number of application cases. Several situations in image processing require both high spatial and high spectral information in a single image. This is important in remote sensing. However, the instruments are not capable of providing such information either by design or because of observational constraints. One possible solution for this is data fusion.
Standard Image Fusion Methods
Image fusion methods can be broadly classified into two groups - spatial domain fusion and transform domain fusion.
The fusion methods such as averaging, Brovey method, principal component analysis (PCA) and IHS based methods fall under spatial domain approaches. Another important spatial domain fusion method is the high pass filtering based technique. Here the high frequency details are injected into upsampled version of MS images. The disadvantage of spatial domain approaches is that they produce spatial distortion in the fused image. Spectral distortion becomes a negative factor while we go for further processing, such as classification problem. Spatial distortion can be very well handled by frequency domain approaches on image fusion. The multiresolution analysis has become a very useful tool for analysing remote sensing images. The discrete wavelet transform has become a very useful tool for fusion. Some other fusion methods are also there, such as Laplacian pyramid based, curvelet transform based etc. These methods show a better performance in spatial and spectral quality of the fused image compared to other spatial methods of fusion.
The images used in image fusion should already be registered. Misregistration is a major source of error in image fusion. Some well-known image fusion methods are:
- High pass filtering technique
- IHS transform based image fusion
- PCA based image fusion
- Wavelet transform image fusion
- Pair-wise spatial frequency matching
==Remote Sensing Image Fremote sensing has several application domains. An important domain is the multi-resolution image fusion (commonly referred to pan-sharpening). In satellite imagery we can have two types of images
- Panchromatic images - An image collected in the broad visual wavelength range but rendered in black and white.
- Multispectral images - Images optically acquired in more than one spectral or wavelength interval. Each individual image is usually of the same physical area and scale but of a different spectral band.
The SPOT PAN satellite provides high resolution (10m pixel) panchromatic data. While the LANDSAT TM satellite provides low resolution (30m pixel) multispectral images. Image fusion attempts to merge these images and produce a single high resolution multispectral image.
Tromatic image and perform inverse transformation to obtain a high resolution multispectral image.
An explanation of how to do Pan-sharpening in Photoshop. For other applications of image in remote sensing, interested readers can refer to: Beyond Pan-sharpening: Pixel-level Fusion in Remote Sensing Applications.
Medical Image Fusion
Image fusion has become a common term used within medical diagnostics and treatment.[3] The term is used when multiple images of a patient are registered and overlaid or merged to provide additional information. Fused images may be created from multiple images from the same imaging modality,[4] or by combining information from multiple modalities,[5] such as magnetic resonance image (MRI), computed tomography (CT), positron emission tomography (PET), and single photon emission computed tomography (SPECT). In radiology and radiation oncology, these images serve different purposes. For example, CT images are used more often to ascertain differences in tissue density while MRI images are typically used to diagnose brain tumors.
For accurate diagnoses, radiologists must integrate information from multiple image formats. Fused, anatomically consistent images are especially beneficial in diagnosing and treating cancer. With the advent of these new technologies, radiation oncologists can take full advantage of intensity modulated radiation therapy (IMRT). Being able to overlay diagnostic images into radiation planning images results in more accurate IMRT target tumor volumes.
Image Fusion Metrics
Comparative analysis of image fusion methods demonstrates that different metrics support different user needs, sensitive to different image fusion methods, and need to be tailored to the application. Categories of image fusion metrics are based on information theory,[2] features, structural similarity, or human perception.[6]
See also
External links
- Investigations of Image Fusion, Electrical Engineering and Computer Science Department, Lehigh University
- http://www.math.hcmuns.edu.vn/~ptbao/LVTN/2003/cameras/a161001433035.pdf Z. Wang, D. Ziou, C. Armenakis, D. Li, and Q. Li, “A comparative analysis of image fusion methods,” IEEE Trans. Geosci. Remote Sens., vol. 43, no. 6, pp. 81–84, Jun. 2005
References
- ^ Haghighat, M. B. A.; Aghagolzadeh, A.; Seyedarabi, H. (2011). "Multi-focus image fusion for visual sensor networks in DCT domain". Computers & Electrical Engineering. 37 (5): 789–797. doi:10.1016/j.compeleceng.2011.04.016.
- ^ a b Haghighat, M. B. A.; Aghagolzadeh, A.; Seyedarabi, H. (2011). "A non-reference image fusion metric based on mutual information of image features". Computers & Electrical Engineering. 37 (5): 744–756. doi:10.1016/j.compeleceng.2011.07.012.
- ^ James, A.P.; Dasarathy, B V. (2014). "Medical Image Fusion: A survey of state of the art". Information Fusion. 19: 4–19. doi:10.1016/j.inffus.2013.12.002.
- ^ Gooding, M.J.; et al. (2010). "Investigation into the fusion of multiple 4-D fetal echocardiography images to improve image quality". Ultrasound in Medincine and Biology. 36 (6): 957–66. doi:10.1016/j.ultrasmedbio.2010.03.017.
{{cite journal}}
: Explicit use of et al. in:|last2=
(help) - ^ Maintz, J.B.; Viergever, M.A. (1998). "A survey of medical image registration". Medical Image Analysis. 2 (1): 1–36. doi:10.1016/s1361-8415(01)80026-8. PMID 10638851.
- ^ Liu, Z.; Blasch, E.; Xue, Z.; Langaniere, R.; Wu, W. (2012). "Objective Assessment of Multiresolution Image Fusion Algorithms for Context Enhancement in Night Vision: A Comparative Survey". IEEE Transactions on Pattern Analysis and Machine Intelligence. 34 (1): 94–109. doi:10.1109/tpami.2011.109.