Jump to content

2-Nitroaniline

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Graeme Bartlett (talk | contribs) at 12:38, 18 September 2019 (more ids and hazards from pubchem). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

2-Nitroaniline
Skeletal formula of 2-nitroaniline
Ball-and-stick model of the 2-nitroaniline molecule
Names
Preferred IUPAC name
2-Nitroaniline
Systematic IUPAC name
2-Nitrobenzenamine
Other names
ortho-Nitroaniline
o-Nitroaniline
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.001.687 Edit this at Wikidata
EC Number
  • 201-855-4
RTECS number
  • BY6650000
UNII
UN number 1661
  • InChI=1S/C6H6N2O2/c7-5-3-1-2-4-6(5)8(9)10/h1-4H,7H2 ☒N
    Key: DPJCXCZTLWNFOH-UHFFFAOYSA-N ☒N
  • InChI=1/C6H6N2O2/c7-5-3-1-2-4-6(5)8(9)10/h1-4H,7H2
    Key: DPJCXCZTLWNFOH-UHFFFAOYAV
  • O=[N+]([O-])c1ccccc1N
Properties
C6H6N2O2
Molar mass 138.126 g·mol−1
Appearance Orange solid
Density 1.442 g/mol
Melting point 71.5 °C (160.7 °F; 344.6 K)
Boiling point 284 °C (543 °F; 557 K)
0.117 g/100 ml (20°C) (SIDS)
Acidity (pKa) -0.3 (of anilinium salt)
-66.47·10−6 cm3/mol
Hazards
GHS labelling:
GHS06: ToxicGHS08: Health hazard
Danger
H301, H311, H331, H373, H412
P260, P261, P264, P270, P271, P273, P280, P301+P310, P302+P352, P304+P340, P311, P312, P314, P321, P322, P330, P361, P363, P403+P233, P405, P501
Flash point 168 °C (334 °F; 441 K)
Related compounds
Related compounds
 3-Nitroaniline, 4-Nitroaniline
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

2-Nitroaniline is an organic compound with the formula H2NC6H4NO2. It is a derivative of aniline, carrying a nitro functional group in position 2.[1] It is mainly used as a precursor to o-phenylenediamine.

Synthesis

2-Nitroaniline is prepared by the reaction of 2-nitrochlorobenzene with ammonia:[2]

ClC6H4NO2 + 2 NH3 → H2NC6H4NO2 + NH4Cl

Many other methods exist for the synthesis of this compound. Direct nitration of aniline is inefficient since anilinium is produced instead. Nitration of acetanilide gives only traces of 2-nitro isomer is obtained due to the great steric effect of the amide. A sulfonation is usually used to block the 4 position and increases the effectiveness to 56%.[3]

Laboratory routes to produce 2-nitroaniline

Uses and reactions

2-Nitroaniline is the main precursor to phenylenediamines, which are converted to benzimidazoles, a family of heterocycles that are key components in pharmaceuticals.[2]

Intramolecular hydrogen-bonding results in a very low basicity for 2-nitroaniline.

Aside from its reduction to phenylenediamine, 2-nitroaniline undergoes other reactions anticipated for aromatic amines. It is protonated to give the anilinium salts. Owing to the influence of the nitro substituent, the amine exhibits a basicity nearly 100,000x lower than aniline itself. Diazotization gives diazonium derivative,[4] which is a precursor to some diazo dyes. Acetylation affords 2-nitroacetanilide.

See also

References

  1. ^ Safety data for o-nitroaniline
  2. ^ a b Gerald Booth (2007). "Nitro Compounds, Aromatic". Weinheim: Wiley-VCH. doi:10.1002/14356007.a17_411. {{cite journal}}: Cite journal requires |journal= (help); Unknown parameter |encyclopedia= ignored (help)
  3. ^ T. W. Grahan, Solomons; Craig, B. Fryhle; Scott, A. Snyder (2011). Organic chemistry (11 ed.). pp. 606–607. ISBN 978-1119077251.
  4. ^ "1,2,3-Benzothiadiazole 1,1-Dioxide". Org. Synth. 47: 4. 1967. doi:10.15227/orgsyn.047.0004. {{cite journal}}: Unknown parameter |authors= ignored (help)
Retrieved from "https://en.wikipedia.org/w/index.php?title=2-Nitroaniline&oldid=916345987"