Jump to content

6×4

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Magioladitis (talk | contribs) at 17:18, 6 July 2015 (clean up using AWB (11296)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Typical American 6×4 tractor unit

A 6×4 drivetrain (six-by-four) is a vehicle with a drivetrain of three axles delivering power to two wheel ends on two of them.[1] It is a form of four-wheel drive[2] but not one of all-wheel drive.

It is the most common form of drivetrain of semi-tractors[2] and heavy haul fixed-chassis cargo trucks.

See also

References

  1. ^ International ProStar ES Class 8 truck: Axle configurations
  2. ^ a b NACFE (North American Council for Freight Efficiency) Executive Report – 6x2 (Dead Axle) Tractors [1] "A typical three axle Class 8 tractor today is equipped with two rear drive axles (“live” tandem) and is commonly referred to as a 6 X 4 configuration meaning that it has four-wheel drive capability."