Jump to content

Search results

Did you mean: walter insect
View (previous 20 | ) (20 | 50 | 100 | 250 | 500)
  • Thumbnail for Washing machine
    A washing machine (laundry machine, clothes washer, washer, or simply wash) is a machine designed to launder clothing. Modern-day home appliances use electric...
    94 KB (11,872 words) - 19:31, 31 May 2024
  • Thumbnail for Disc integration
    also possible to use the same principles with rings instead of discs (the "washer method") to obtain hollow solids of revolutions. This is in contrast to...
    5 KB (797 words) - 01:09, 4 May 2024
  • Thumbnail for Locknut
    nut (K-nut or washer nut) with a free-spinning washer. In the locknut form, this is a star-type lock washer. Plate nut Polymer insert nut (Nyloc nut)...
    4 KB (427 words) - 06:53, 27 December 2023
  • Thumbnail for Ball washer
    A ball washer or ball shagger is a piece of equipment for cleaning dirty golf balls. Because golf balls have a dimpled surface to improve their aerodynamic...
    2 KB (241 words) - 08:50, 17 May 2023
  • Thumbnail for Nut (hardware)
    nut Jet nut (K-nut) Keps nut (K-nut or washer nut) with a star-type lock washer Nyloc plate nut Polymer insert nut (Nyloc) Security locknut Serrated face...
    20 KB (895 words) - 16:24, 10 May 2024
  • case has a steel case head and brass body connected by an aluminum locking washer to support the high chamber pressure of 80,000 psi (551.6 MPa). The cartridge...
    20 KB (1,569 words) - 15:17, 15 May 2024
  • support ring or insert attached to the wheel that can support the weight of the vehicle in the event of a loss of pressure. The run-flat insert has an unsurpassed...
    12 KB (1,393 words) - 11:35, 5 September 2023
  • Thumbnail for Torsion siege engine
    the frame. This problem was solved simply with the addition of metal washers inserted in the holes of the frames and fastened either with tenons or rims...
    48 KB (5,272 words) - 15:17, 17 January 2024
  • Thumbnail for Plain bearing
    Plain bearing (redirect from Thrust washer)
    it out. The thrust form of a bushing is conventionally called a thrust washer. Two-piece plain bearings, known as full bearings in industrial machinery...
    36 KB (3,602 words) - 15:52, 6 June 2024
  • Thumbnail for Grommet
    A grommet is a ring or edge strip inserted into a hole through thin material, typically a sheet of textile fabric, sheet metal or composite of carbon fiber...
    8 KB (1,001 words) - 16:49, 31 January 2024
  • Thumbnail for Mandrel
    cylinder, threaded on one end, with a washer brazed onto the threaded end and an accompanying screw and second washer used to clamp the circular saw blade...
    9 KB (1,229 words) - 13:52, 9 October 2023
  • Thumbnail for Little Boy
    the total fissile mass (25.6 kilograms or 56 pounds). The insert was a stack of six washer-like uranium discs somewhat thicker than the projectile rings...
    58 KB (7,375 words) - 19:41, 17 May 2024
  • Thumbnail for Screw terminal
    color-coded green and, when used on consumer electronics, often have a washer with gripping "teeth", to ensure better connections. Printed circuit board...
    8 KB (1,110 words) - 10:38, 14 March 2024
  • Thumbnail for Faucet aerator
    resulting stream. Three major components of an aerator are: housing, insert and rubber washer. A faucet aerator can be classified on the basis of its flow rate...
    5 KB (644 words) - 16:37, 8 June 2024
  • Thumbnail for Rotary switch
    of positions. A special toothed washer that sits below the holding nut can be positioned so that the tooth is inserted into one of a number of slots in...
    3 KB (441 words) - 22:37, 2 April 2024
  • Thumbnail for Safety wire
    head of the fastener to be secured. They are installed just like any other washer, after which the sides of the tab are bent up to make contact with the sides...
    20 KB (3,127 words) - 16:24, 14 September 2023
  • Thumbnail for Pocket-hole joinery
    but they are needed for a tight, strong joint. Pocket screws have a wide washer head to spread the load for a firm bond, and prevent screwing too far into...
    6 KB (761 words) - 06:00, 21 May 2023
  • Thumbnail for Gudgeon
    fittings are a pair of gudgeons each with a pin joining them with split pin/washer to stop them coming out.[citation needed] In shipping locks, the upper pivot...
    5 KB (707 words) - 16:19, 28 May 2024
  • Thumbnail for Slug (coin)
    purchases. The object substituted may be an inexpensive object such as a washer or a coin from another country with far lower purchasing power than the...
    12 KB (1,472 words) - 09:37, 5 June 2024
  • Thumbnail for Pin Index Safety System
    Bodok seal, and is a moulded rubber washer (or Neoprene) supported by a metal rim. The Bodok seal is a specialised washer that ensures a gas-tight seal between...
    9 KB (1,055 words) - 02:54, 3 December 2023
View (previous 20 | ) (20 | 50 | 100 | 250 | 500)