Jump to content

Blennerhassett Island Bridge

Coordinates: 39°16′36″N 81°38′49″W / 39.27667°N 81.64694°W / 39.27667; -81.64694
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Citation bot (talk | contribs) at 02:19, 2 February 2021 (Misc citation tidying. | You can use this bot yourself. Report bugs here. | Suggested by Abductive | Category:Steel bridges in the United States‎ | via #UCB_Category 363/924). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Blennerhassett Island Bridge
Coordinates39°16′36″N 81°38′49″W / 39.27667°N 81.64694°W / 39.27667; -81.64694
Carries4 lanes of US 50
CrossesOhio River
LocaleBelpre Township, Washington County, Ohio and Washington, West Virginia
Maintained byWest Virginia Division of Highways
Characteristics
DesignNetwork Arch Bridge
Total length4,009 feet (1,222 m)
Width107 feet (33 m)
Longest span878 feet (268 m)
Clearance below76 feet (23 m)
History
OpenedJune 13, 2008
Location
Map

Blennerhassett Island Bridge, with a network arch design, [1] carries U.S. Route 50 (Appalachian Development Highway System's Corridor D) over the Ohio River and the historic Blennerhassett Island between Belpre Township, Washington County, Ohio and Washington, West Virginia in the United States. Construction of the bridge was overseen by the Walsh Construction Company of Chicago, and it opened to traffic on June 13, 2008. [2] The completion of the span completed Corridor D between Interstate 275 east of Cincinnati to Interstate 79 at Clarksburg, West Virginia.

References

  1. ^ Parkersburg News. "Bridge Nears Completion". Archived from the original on 2008-05-13. Retrieved 2008-04-16.
  2. ^ GoBridges.com. "Innovative tied-arch steel bridge to span Ohio River". Archived from the original on October 7, 2007. Retrieved 2015-12-08.