Jump to content

TI-81

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Essemque (talk | contribs) at 16:55, 4 February 2021 (TI didn't introduce TI_BASIC until the TI-83. Citing the original calculator guidebook. Also confirmed by the Wikipedia page on TI-BASIC.). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

TI-81
A 1994 TI-81 showing graphs
TypeGraphing calculator
ManufacturerTexas Instruments
Introduced1990
Discontinued1996[1]
SuccessorTI-82
Calculator
Entry modeD.A.L.
Precision13 digits
Display size96×64 pixels, 16×8 characters
CPU
ProcessorZilog Z80
Frequency2 MHz
Programming
Programming language(s)TI-BASIC, Assembly
User memory2400 bytes of RAM
Other
Power supply4 AAA's,
1 CR1616 or CR1620

The TI-81 is an early graphing calculator made by Texas Instruments. It was designed in 1990 for use in algebra and precalculus courses. Since its original release, it has been superseded several times by newer calculators: the TI-85, TI-82, TI-83, TI-86, TI-83 Plus, TI-83 Plus Silver Edition, TI-84 Plus, TI-84 Plus Silver Edition, and most recently the TI-Nspire and TI-Nspire CAS. Most of these share the original feature set and 96×64-pixel display that began with this calculator.

Features

The TI-81 is powered by a Zilog Z80 microprocessor, like those used in almost every other Texas Instruments graphing calculator (except the TI-80, TI-89, TI-89 Titanium, TI-92, TI-92 Plus, Voyage 200 and TI-Nspire series). However, the processor runs at only 2 MHz whereas the other Z80-powered Texas Instruments calculators run at a speed of at least 6 MHz (the TI-83 Plus Silver Edition, TI-84 Plus, and TI-84 Plus Silver Edition run at 15 MHz). It contained 2400 bytes of RAM.

The TI-81's user interactions are provided by its so-called Equation Operation System. This is comparable to the interface provided by the more recent TI-82, TI-83, and so on. This system is capable of such tasks as two-dimensional parametric graphing (in addition to standard two-dimensional function graphing), trigonometric calculations in units of either degrees or radians, simple drawing capabilities, creation and manipulation of matrices up to 6x6 in size, and programming in a proprietary statement-based language.[2]

In late 2009 an exploit was found that can be used to execute machine code on the TI-81, using manual input of code instead of sending programs using a link cable.[3]

As with its successors, the TI-81 is powered by four AAA batteries and one CR1616 or CR1620 lithium backup battery (to ensure programs are kept when the AAA batteries are being changed). Some TI-81 units omit the backup battery;[4] if the AAA batteries of one of these units are changed one at a time and quickly, the memory contents are still retained.

Texas Instruments distributes software which emulates the TI-81 and its Equation Operating System on a desktop computer using MS-DOS[5] or DOSBox.

See also

  • ticalc.org – The largest archive of TI programs available.

References

  1. ^ Woerner, Joerg (2009-02-08). "DATAMATH: TI-81 (1995)". Retrieved 27 January 2013.
  2. ^ Christiansen, Brad; et al. "TI-81 Guidebook" (PDF). Texas Instruments, Inc. p. 8-9. Retrieved 4 February 2021.
  3. ^ Evans, Travis (17 August 2009). "User Machine Code Execution on TI-81 Becomes a Reality". Retrieved 27 January 2013.
  4. ^ Woerner, Joerg (2009-01-27). "DATAMATH: TI-81 Engineering Sample". Retrieved 4 February 2012.
  5. ^ "PC-81 on ticalc.org". 1998-04-28. Retrieved 4 February 2012.