Carbon disulfide (data page)
Appearance
This page provides supplementary chemical data on carbon disulfide.
Material Safety Data Sheet
[edit]The handling of this chemical may incur notable safety precautions. It is highly recommended that you seek the Material Safety Datasheet (MSDS) for this chemical from a reliable source such as SIRI, and follow its direction. MSDS available from Mallinckrodt Baker
Structure and properties
[edit]Structure and properties | |
---|---|
Index of refraction, nD | 1.6276 at 20 °C |
Abbe number | ? |
Dielectric constant, εr | 2.641 ε0 at 20 °C |
Bond strength | ? |
Bond length | ? |
Bond angle | ? |
Magnetic susceptibility | ? |
Surface tension[1] | 35.3 dyn/cm at 0 °C 32.3 dyn/cm at 20 °C |
Viscosity[2] | 0.495 mPa·s at –10 °C 0.436 mPa·s at 0 °C 0.380 mPa·s at 5 °C 0.363 mPa·s at 20 °C |
Thermodynamic properties
[edit]Phase behavior | |
---|---|
Triple point | 161.11 K (–112.04 °C), ? Pa |
Critical point | 552 K (279 °C), 7900.00 kPa |
Std enthalpy change of fusion, ΔfusH |
4.39 kJ/mol |
Std entropy change of fusion, ΔfusS |
? J/(mol·K) |
Std enthalpy change of vaporization, ΔvapH |
27.65 kJ/mol |
Std entropy change of vaporization, ΔvapS |
86.68 J/(mol·K) |
Solid properties | |
Std enthalpy change of formation, ΔfH |
? kJ/mol |
Standard molar entropy, S |
? J/(mol K) |
Heat capacity, cp | ? J/(mol K) |
Liquid properties | |
Std enthalpy change of formation, ΔfH |
89.41 kJ/mol |
Standard molar entropy, S |
151.0 J/(mol K) |
Enthalpy of combustion, ΔcH |
–1687.2 kJ/mol |
Heat capacity, cp | 78.99 J/(mol K) at 25 °C |
Gas properties | |
Std enthalpy change of formation, ΔfH |
117.1 kJ/mol |
Standard molar entropy, S |
237.98 J/(mol K) at 101.325 kPa |
Enthalpy of combustion, ΔcH |
–1112 kJ/mol |
Heat capacity, cp | 45.66 J/(mol K) |
van der Waals' constants[3] | a = 1177 L2 kPa/mol2 b = 0.07685 liter per mole |
Vapor pressure of liquid
[edit]P in mm Hg | 1 | 10 | 40 | 100 | 400 | 760 | 1520 | 3800 | 7600 | 15200 | 30400 | 45600 | |
T in °C | –73.8 | –44.7 | –22.5 | –5.1 | 28.0 | 46.5 | 69.1 | 104.8 | 136.3 | 175.5 | 222.8 | 256.0 |
Table data obtained from CRC Handbook of Chemistry and Physics 44th ed.
Distillation data
[edit]Vapor-liquid Equilibrium for Carbon disulfide/Methanol[5] P = 760 mm Hg | ||
BP Temp. °C |
% by mole carbon disulfide | |
---|---|---|
liquid | vapor | |
58.8 | 1.3 | 20.6 |
53.0 | 2.5 | 34.9 |
47.8 | 4.5 | 48.7 |
43.5 | 9.9 | 65.3 |
42.8 | 10.6 | 65.9 |
40.0 | 15.1 | 67.6 |
38.9 | 19.4 | 70.1 |
38.5 | 20.0 | 69.1 |
38.0 | 34.0 | 69.8 |
37.8 | 64.9 | 70.1 |
37.6 | 70.0 | 70.1 |
37.9 | 75.7 | 70.5 |
37.8 | 90.3 | 72.3 |
37.7 | 91.6 | 73.4 |
37.8 | 92.8 | 72.7 |
38.2 | 93.0 | 72.9 |
41.0 | 99.0 | 84.4 |
44.1 | 99.7 | 99.5 |
Spectral data
[edit]UV-Vis | |
---|---|
λmax | ? nm |
Extinction coefficient, ε | ? |
IR | |
Major absorption bands | ? cm−1 |
NMR | |
Proton NMR | |
Carbon-13 NMR | |
Other NMR data | |
MS | |
Masses of main fragments |
References
[edit]- ^ Lange's Handbook of Chemistry, 10th ed. pp. 1661–1663
- ^ CRC Handbook of Chemistry and Physics, 44th ed. pp. 2258–2263
- ^ Lange's Handbook of Chemistry 10th ed, pp. 1522–1524
- ^ "Pure Component Properties" (Queriable database). Chemical Engineering Research Information Center. Retrieved 19 May 2007.
- ^ "Binary Vapor-Liquid Equilibrium Data" (Queriable database). Chemical Engineering Research Information Center. Retrieved 19 May 2007.
- Linstrom, Peter (1997). "NIST Standard Reference Database". National Institute of Standards and Technology. doi:10.18434/T4D303.
{{cite journal}}
: Cite journal requires|journal=
(help)
This box:
- Except where noted otherwise, data relate to Standard temperature and pressure.
- Reliability of data general note.