Jump to content

Trimethyl phosphate

From Wikipedia, the free encyclopedia

This is the current revision of this page, as edited by 61.246.123.52 (talk) at 14:12, 16 July 2023 (Production). The present address (URL) is a permanent link to this version.

(diff) ← Previous revision | Latest revision (diff) | Newer revision → (diff)
Trimethyl phosphate
Ball-and-stick model of trimethyl phosphate
Names
Preferred IUPAC name
Trimethyl phosphate
Other names
Phosphoric acid trimethyl ester
Methyl phosphate, tribasic
Trimethoxyphosphine oxide
Trimethyl orthophosphate fraction
Identifiers
3D model (JSmol)
Abbreviations TMP
1071731
ChEBI
ChemSpider
ECHA InfoCard 100.007.405 Edit this at Wikidata
49926
RTECS number
  • TC8225000
UNII
  • InChI=1S/C3H9O4P/c1-5-8(4,6-2)7-3/h1-3H3 checkY
    Key: WVLBCYQITXONBZ-UHFFFAOYSA-N checkY
  • InChI=1/C3H9O4P/c1-5-8(4,6-2)7-3/h1-3H3
    Key: WVLBCYQITXONBZ-UHFFFAOYAV
  • O=P(OC)(OC)OC
Properties
(CH3O)3PO
Molar mass 140.08
Appearance Colorless liquid
Melting point −46 °C (−51 °F; 227 K)
Boiling point 197 °C (387 °F; 470 K)
good
Hazards
GHS labelling:
GHS05: CorrosiveGHS07: Exclamation markGHS08: Health hazard
Danger
H302, H315, H318, H319, H340, H350, H351, H361, H373
P201, P202, P260, P264, P270, P280, P281, P301+P312, P302+P352, P305+P351+P338, P308+P313, P310, P314, P321, P330, P332+P313, P337+P313, P362, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
2
1
0
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

Trimethyl phosphate is the trimethyl ester of phosphoric acid. It is a colourless, nonvolatile liquid. It has some specialized uses in the production of other compounds.[1]

Production

[edit]

Trimethyl phosphate is prepared by treating phosphorus oxychloride with methanol in the presence of an amine base:

POCl3 + 3 CH3OH + 3 R3N → PO(OCH3)3 + 3 R3NH+Cl

It is a tetrahedral molecule that is a weakly polar solvent.

Applications

[edit]

Trimethyl phosphate is a mild methylating agent, useful for dimethylation of anilines and related heterocyclic compounds.[2] The method is complementary to the traditional Eschweiler-Clarke reaction in cases where formaldehyde engages in side reactions.

Trimethyl phosphate is used as a solvent for aromatic halogenations and nitrations as required for the preparation of pesticides and pharmaceuticals.

Other applications

[edit]

It is used as a color inhibitor for fibers (e.g. polyester) and other polymers. Trimethyl phosphate is used as a simulant for chemical weapon nerve agents.[citation needed]

Safety considerations

[edit]

With an LD50 of 2g/kg for rats, trimethylphosphate is expected to have low acute toxicity.[3]

References

[edit]
  1. ^ D. E. C. Corbridge "Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology" 5th Edition Elsevier: Amsterdam 1995. ISBN 0-444-89307-5.
  2. ^ William A. Sheppard (1973). "m-Trifluoromethyl-N,N-dimethylaniline". Organic Syntheses; Collected Volumes, vol. 5, p. 1085.
  3. ^ J. Svara, N. Weferling, T. Hofmann "Phosphorus Compounds, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2006. doi:10.1002/14356007.a19_545.pub2
[edit]