Mack NM 6-ton 6x6 truck

Mack Model NM
Mack NM-3
Type	6-ton 6x6 Prime mover
Production history
Designer	Mack
Manufacturer	Mack
Produced	1940-1944
No. built	8,400+ (all models)
Specifications (NM3)
Mass	22,659 lb (10,278 kg)
Length	23 ft 4 in (7.11 m)
Width	8 ft (2.44 m)
Height	9 ft 11 in (3.02 m)
Engine	Mack EY 159 hp (119 kW)
Transmission	5 speed x 2 range trf. case
Suspension	Live beam axles on leaf springs
Operational range	280 mi (450.6 km)
Maximum speed	34 mph (55 km/h)

The Mack NM 6-ton 6x6 truck, officially "Prime Mover Cargo truck (G-535)", was Mack's first military 6x6. It debuted as a prime mover in 1940, and was used for towing AA guns, and ammunition. Gun crews rode in its canvas covered bed. The NM's enclosed cab came from the commercial L-model. Many NM's were used by the British as recovery vehicles.

Technical data

Overall Dimensions:
* 23 feet 4 inches (7.11 m) long
* 8 feet (2.44 m) wide
* 9 feet 11 inches (3.02 m) tall
Weight: 21,750 lb (9,870 kg)
Engine: Mack EY 707 cu in (11.6 L) ohv inline 6 cyl. gasoline engine with 170 hp (130 kW) at 2100.
Gearbox: Mack TR36 5-speed direct-top
Transfer Case: Timken-Detroit 2-speed T77 with 2.55 low
Wheelbase: 14 feet 9 inches (4.50 m)
Tires 9.75-22 (NM-1, -2, -3 Lee commercial with highway tread)

Models

The NM-1 and NM-2 had an amidships mounted winch with a capstan head. It had a short steel cargo body 11 feet (3.35 m) long and 7 feet 4 inches (2.24 m) wide. The cargo body had troop seats, a canvas cover, and a spare wheel on the front right side. NM-2 had smaller head lamps and parking lamps on top.

The NM-3 was the last model to have an enclosed cab. It was similar to the NM-1 and NM-2 except for: front pintle for positioning artillery pieces, arched bumper (front pintle under the arche), smaller brush guard, side lights on mudguards, towing hooks on bumper deleted, radiator shell with Mack nameplate.

There was no NM-4, the prototype NN-2 did not go into production.

The NM-5 and NM-6 had a soft top cab with folding windscreen. It had a wooden cargo body with two spare tires at the front right and left. They had some technical detail changes. The only differences between the NM-5 and NM-6 were rifle brackets in the cab and jerrycan holders left of the winch for the NM-6.

NM-7 and NM-8 were like the NM-5 and NM-6. There were only minor detail modifications. Some were equipped with the gun-carriage brake cylinder: this was an air-cylinder from Hanna for the simultaneous actuation (cable operated) of the air brakes of the truck and the mechanical brakes of the gun.

Gallery

• 
  Mack NM-2
• 
  Mack specifications

See also

• Mack trucks
• Mack EH
• Mack M123 and M125
• Mack NR

References

Bibliography

• Vanderveen, Bart (1998). A Record of Military Macks in the Services and Beyond. Battle of Britain Intl. ISBN 9781870067096.
• Crismon, Fred W (2001). US Military Wheeled Vehicles (3 ed.). Victory WWII Pub. pp. 363–365. ISBN 0-970056-71-0.
• Doyle, David (2003). Standard catalog of U.S. Military Vehicles. Kraus Publications. pp. 205–207. ISBN 0-87349-508-X.
• TM 10-1476
• SNL G-535