Jump to content

(3-Aminopropyl)triethoxysilane

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Graeme Bartlett (talk | contribs) at 02:09, 26 August 2023 (added Category:Ethoxy compounds using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

(3-Aminopropyl)triethoxysilane

Structural formula of (3-aminopropyl)triethoxysilane
Names
Preferred IUPAC name
3-(Triethoxysilyl)propan-1-amine
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.011.863 Edit this at Wikidata
UNII
  • InChI=1S/C9H23NO3Si/c1-4-11-14(12-5-2,13-6-3)9-7-8-10/h4-10H2,1-3H3
    Key: WYTZZXDRDKSJID-UHFFFAOYSA-N
  • InChI=1/C9H23NO3Si/c1-4-11-14(12-5-2,13-6-3)9-7-8-10/h4-10H2,1-3H3
    Key: WYTZZXDRDKSJID-UHFFFAOYAI
  • CCO[Si](CCCN)(OCC)OCC
Properties
C9H23NO3Si
Molar mass 221.372 g·mol−1
Density 0.946 g/mL[1]
Melting point −70 °C (−94 °F; 203 K)
Boiling point 217 °C (423 °F; 490 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

(3-Aminopropyl)triethoxysilane (APTES) is an aminosilane frequently used in the process of silanization, the functionalization of surfaces with alkoxysilane molecules. It can also be used for covalent attaching of organic films to metal oxides such as silica and titania.

Use with PDMS

APTES can be used to covalently bond thermoplastics to poly(dimethylsiloxane) (PDMS).[2] Thermoplastics are treated with oxygen plasma to functionalize surface molecules, and subsequently coated with an aqueous 1% by volume APTES solution. PDMS is treated with oxygen plasma and placed in contact with the functionalized thermoplastic surface. A stable, covalent bond forms within 2 minutes.

Silsesquioxane synthesis

Octa(3-aminopropyl)silsesquioxane can be obtained in a one step hydrolytic condensation using APTES and hydrochloric or trifluoromethanesulfonic acid (CF3SO3H).[3]

Use with cell cultures

APTES-functionalized surfaces have been shown to be nontoxic to embryonic rat cardiomyocytes in vitro.[4] Further experimentation is needed to evaluate toxicity to other cell types in extended culture.

Toxicity

APTES is a toxic compound with an MSDS health hazard score of 3.[5] APTES fumes are destructive to the mucous membranes and the upper respiratory tract, and should be used in a fume hood with gloves. If a fume hood is not available, a face shield and full face respirator must be implemented. The target organs of APTES are nerves, liver and kidney.

References

  1. ^ "3-Aminopropyltriethoxysilane | 919-30-2". Chemicalbook.com. Retrieved 2012-08-01.
  2. ^ Sunkara V., Park D.K., Hwang H., Chantiwas R., Soper S.A., and Cho Y.K. (2011). Simple room temperature bonding of thermoplastics and poly(dimethylsiloxane). Lab on a Chip, 11(5), 962-965
  3. ^ Janeta, Mateusz; John, Łukasz; Ejfler, Jolanta; Szafert, Sławomir (2014-11-24). "High-Yield Synthesis of Amido-Functionalized Polyoctahedral Oligomeric Silsesquioxanes by Using Acyl Chlorides". Chemistry: A European Journal. 20 (48): 15966–15974. doi:10.1002/chem.201404153. ISSN 1521-3765. PMID 25302846.
  4. ^ Natarajan, Growth and Electrophysiological Properties of Rat Embryonic Cardiomyocytes on Hydroxyl- and Carboxyl-Modified Surfaces, J Biomater Sci Polym Ed 2010
  5. ^ 281778 - (3-Aminopropyl)trimethoxysilane. "(3-Aminopropyl)trimethoxysilane 97%". Sigma-Aldrich. Retrieved 2012-08-01.{{cite web}}: CS1 maint: numeric names: authors list (link)
Retrieved from "https://en.wikipedia.org/w/index.php?title=(3-Aminopropyl)triethoxysilane&oldid=1172273473"