Jump to content

Salto Osório Hydroelectric Power Plant

Coordinates: 25°32′06″S 53°00′33″W / 25.53500°S 53.00917°W / -25.53500; -53.00917
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by InternetArchiveBot (talk | contribs) at 04:44, 23 September 2023 (Rescuing 1 sources and tagging 0 as dead.) #IABot (v2.0.9.5) (Whoop whoop pull up - 15153). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Salto Osório Dam
Salto Osório Hydroelectric Power Plant is located in Brazil
Salto Osório Hydroelectric Power Plant
Location of Salto Osório Dam in Brazil
Official nameSalto Osório Hydroelectric Power Plant
LocationOsório, Paraná, Brazil
Coordinates25°32′06″S 53°00′33″W / 25.53500°S 53.00917°W / -25.53500; -53.00917
Opening date1975
Owner(s)Tractebel Energia
Dam and spillways
Type of damEmbankment, rock-fill
ImpoundsIguazu River
Height56 m (184 ft)
Length750 m (2,460 ft)
Spillway typeService, controlled
Spillway capacity28,000 m3/s (990,000 cu ft/s)
Reservoir
CreatesSalto Osório Reservoir
Total capacity403,000,000 m3 (327,000 acre⋅ft) (Live storage)
Catchment area45,800 km2 (17,700 sq mi)
Surface area51 km2 (20 sq mi)
Power Station
Commission date1975-1981
TypeConventional
Turbines6 x Francis turbines
Installed capacity1,078 MW (1,446,000 hp)

The Salto Osório Hydroelectric Power Plant is a dam and hydroelectric power plant on the Iguazu River near Osório in Paraná, Brazil. It is the second dam upstream of the Iguazu Falls and was completed in 1979.[1][2] The power station has a 1,078 MW capacity and is supplied with water by a rock-fill embankment dam.

It is owned and operated by Tractebel Energia.

Salto Osório Dam

The Salto Osório Dam is 56 metres (184 ft) high, 750 metres (2,460 ft) long and is of rock-fill embankment type. The dam has two spillways containing 9 20.77 metres (68.1 ft) wide and 15.33 metres (50.3 ft) wide radial gates and has a maximum capacity of 28,000 cubic metres per second (990,000 cu ft/s). Each spillway is on the main structure and the northern spillway contains 4 floodgates with 5 located next to the power station. The reservoir formed behind the dam contains 403,000,000 cubic metres (327,000 acre⋅ft) of live storage with a surface area of 51 square kilometres (20 sq mi) and a catchment area of 45,800 square kilometres (17,700 sq mi). The average flow of the river through the dam is 937 cubic metres per second (33,100 cu ft/s) and the normal operating level of the reservoir is 397 metres (1,302 ft) above sea level.[3]

Power plant

The power plant at the southern end of the dam contains six hydroelectric generators powered by Francis turbines. Four of the turbines were manufactured by Mitsubishi and the other two turbines were manufactured by Hitachi. Each turbine has a rated discharge of 289 cubic metres per second (10,200 cu ft/s) and is fed by a 7.4 metres (24 ft) diameter steel penstock which provides a gross hydraulic head of 82 metres (269 ft). The first generator was commissioned on October 17, 1975, with another later that year, two in 1976, another in 1980 and the final June 21, 1981.[3] Tractebel Energia, the owners of the power plant began a refurbishment of the turbines in 2005.[4]

See also

References

  1. ^ "Parana River Basin Study Area - Figure 1". The Scientific Electronic Library Online. Archived from the original on 11 October 2012. Retrieved 11 September 2010.
  2. ^ Valente, Marcela (March 30, 2009). "Planned Dam Above Famous Falls Draws Fire". IPS. Archived from the original on 10 June 2011. Retrieved 11 September 2010.
  3. ^ a b "Technical Specs - HPP Salto Osório - UHSO". Tractebel Energia. Retrieved 11 September 2010.[permanent dead link]
  4. ^ "Bearing up under tight deadlines". International Water Power and Dam Construction. 24 July 2009. Archived from the original on 14 June 2011. Retrieved 11 September 2010.