Jump to content

Nautical measured mile

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by AntientNestor (talk | contribs) at 21:56, 3 October 2023 (typo in my last). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Admiralty distance poles at St Abb's Head.

A nautical measured mile is a nautical mile which is marked by two pairs of towers. A mile is measured by sailing on a given bearing and lining up the pairs of towers. The start of the mile is recorded when the first pair of towers line up and the end of the mile recorded when the second pair line up.

To accurately measure performance ships must make at least four to six runs in both directions to allow for the wind and tide.[1]

There are several nautical measured miles around the British Isles:

See also

References

  1. ^ Barrass, C. B. (2004). Ship design and performance for masters and mates. Amsterdam: Elsevier/Butterworth-Heinemann. p. 123. ISBN 0-7506-6000-7.
  2. ^ Tony White (March 2003). "Nautical Measured Mile Markers". Polperro village website. Retrieved 11 July 2011.
  3. ^ Dee Kay (February 21, 2009). "Skelmorlie Measured Mile". Kintyre on Record. Retrieved 11 July 2011.
  4. ^ a b 16 Essex (Map). 1:126,720. Revised half-inch. John Bartholomew and Son. 1962.
  5. ^ Inskip, G. H. (1887). North Sea Pilot. Vol. IV (4 ed.). London: Admiralty Hydrographic Office. p. 12.
  6. ^ North Sea Pilot. Vol. III (Sixth ed.). London: Admiralty Hydrographic Office. 1897. pp. 316–7.
  7. ^ a b "Measured Miles". Secret Scotland. Retrieved 11 July 2011.