Lane hydrogen producer
 | This article's lead section may be too short to adequately summarize the key points. (November 2021) |
The Lane hydrogen producer was an apparatus for hydrogen production based on the steam-iron process and water gas[1] invented in 1903[2] by a British engineer, Howard Lane.
History
The first commercial Lane hydrogen producer was commissioned in 1904. By 1913, 850,000,000 cubic feet (24,000,000 m3) of hydrogen was manufactured annually by this process.[3]
In the early-part of the 20th century, the process found some use as a means of producing hydrogen lifting gas for airships, as it could produce large volumes of gas cheaply. Lane producers were installed at some British airship stations so the gas could be manufactured on-site. To work efficiently however, the plant required skilled operators and to be running as a quasi-continuous process. A competing process, referred to as the Silicol Process, reacted Ferrosilicon with a strong Sodium hydroxide solution and had the advantage of flexibility.[4]
In the 1940s the Lane process was superseded by cheaper methods of hydrogen production that used oil or natural gas as a feedstock.[3]
Process description
Where hydrogen was commonly produced with the single retort like the Messerschmitt[5] and the Bamag type, Lane introduced the multiple retort type. In the Lane generator water gas was used to heat the retorts up to 600-800 °C after which water gas-air was used in the retorts. In the steam-iron process the iron oxidizes and has to be replaced with fresh metal, in the Lane hydrogen producer the iron is reduced with water gas back to its metallic condition, after which the process restarts.
The chemical reactions are[3]
- 3Fe+ 4H2O → Fe3O4 + 4H2
- Fe3O4+ 4CO → 3Fe + 4CO2
The net chemical reaction is:
- CO + H2O → CO2 + H2
See also
- Iron oxide cycle
- Sponge iron reaction
- Water gas shift reaction
- Timeline of hydrogen technologies
- Chemical looping combustion
References
- ^ "1909 - The Lane hydrogen producer".[dead link]
- ^ Hurst, S. (1939). "Production of hydrogen by the steam-iron method". Oil & Soap. 16 (2): 29–35. doi:10.1007/BF02543209. S2CID 92859052.
- ^ a b c Fan, Liang-Shih (2011). Chemical Looping Systems for Fossil Energy. John Wiley & Sons. p. 36. ISBN 978-1118063132.
- ^ Burgess, A.M. "Hydrogen for Airships". Nevil Shute Norway Foundation. Retrieved January 2, 2013.
- ^ Taylor, Hugh S. (2008). "Hydrogen from Steam (Single retort)". Industrial Hydrogen. Read Books. p. 37. ISBN 978-1-4097-2892-4.