Affordaplane
| Affordaplane | |
|---|---|
| |
| Role | Ultralight aircraft |
| National origin | United States |
| Manufacturer | Affordaplane Aircraft |
| Designer | Dave Edwards[1] |
| First flight | 2001 |
| Introduction | 2001 |
| Status | Plans available |
| Number built | Five registered with FAA[2] |
The Affordaplane (sometimes written Afford-A-Plane) is an American plans-built, high wing, strut-braced, single engine, tractor configuration, conventional landing gear equipped ultralight aircraft for the US FAR 103 Ultralight Vehicles rules. Designed by Dave Edwards, it is intended for amateur construction.[1] The aircraft plans claim it can be built out of readily sourced and inexpensive materials using common tools in 150 to 250 hours construction time.[3]
Design and development
The Affordaplane is constructed of an 6061 T-6 aluminum tube fuselage and other structural components, using both square and round aluminum tube. Wings are a "ladder-type" cross-brace structure supported by struts and covered in doped fabric. Builders have the option of constructing the ribs out of aluminum tube or rigid foam. Instead of welding, structural components are attached with riveted or bolted aluminum gussets. The cockpit is exposed with a plexiglass or Lexan windshield. The controls are conventional 3-axis.[citation needed]
When built as a Part 103 ultralight, the aircraft is intended to be powered by a 26 hp (19 kW) Rotax 277, 35 hp (26 kW) Rotax 377, or similar engine. Heavier and more powerful engines including the Rotax 503 may also be used, but will result in exceeding the FAR Part 103 less than 254 pound (115 kg) empty weight limit, if the aircraft is otherwise built as designed. The plans recommend Rotax engines, but the Half VW, Kawasaki 340 and Kawasaki 440 have also been used.[4]
The Affordaplane has a unique single acting aileron control surface approximately the entire length of the wing. Some builders have configured these as flaperons but the plans do not include details for this modification.[5]
Variants
The plans are drawn as a single-seat version. At least one builder has constructed a two-seat, tandem version.[6]
Specifications (ultralight configuration)
Data from Ultralight News,[1] Pilot Mix.[4]
General characteristics
- Crew: one
- Capacity: one (ultralight configuration)
- Length: 17 ft 3 in (5.26 m)
- Wingspan: 27 ft 5 in (8.36 m)
- Height: 5 ft 0 in (1.52 m) varies by main landing gear wheel diameter
- Wing area: 123 sq ft (11.4 m2)
- Empty weight: 254 lb (115 kg)
- Gross weight: 540 lb (245 kg)
- Fuel capacity: 5 US gallons (19 litres)
- Powerplant: 1 × Rotax 277 2-stroke gasoline, 26 hp (19 kW)
- Propellers: 2, 3, or 4-bladed composite (preferred) or wood (prop varies by builder configuration)
Performance
- Maximum speed: 63 mph (101 km/h, 55 kn)
- Cruise speed: 55 mph (89 km/h, 48 kn)
- Stall speed: 26 mph (42 km/h, 23 kn)
- Never exceed speed: 75 mph (121 km/h, 65 kn)
- Range: 150 mi (240 km, 130 nmi) estimated
- Service ceiling: 10,000 ft (3,000 m) estimated
- Rate of climb: 1,000 ft/min (5.1 m/s) estimated
- Wing loading: 4.39 lb/sq ft (21.4 kg/m2) Part 103 compliant at MTOW
See also
Aircraft of comparable role, configuration, and era
References
- ^ a b c "Affordaplane ultralight". www.ultralightnews.com. Retrieved May 10, 2018.
- ^ "Light Planes Light Aircraft Database". lightplanes.org. Archived from the original on April 30, 2016. Retrieved May 10, 2018.
- ^ "Build An Airplane For Under $7000". Retro Thing. Retrieved May 10, 2018.
- ^ a b "Affordaplane - An Affordable Aircraft! - Light Aircraft DB & Sales". pilotmix.com. Retrieved May 10, 2018.
- ^ "Control System". myultralightpics.tripod.com. Retrieved May 10, 2018.
- ^ "Affordaplane Aircraft Affordaplane Light Sport Aircraft ultralight airplane Photo And Video Gallery". affordaplane.com. Retrieved May 10, 2018.