Jump to content

Realistic Controls

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by I dream of horses (talk | contribs) at 03:27, 16 February 2018 (Cleaning up a randomly generated list using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

NYLAC Computers refer to any computer built by the NYLAC computer company.[1]

Company and name

NYLAC computer company built a computer based on the Zilog Z-80 microprocessor. It was derived from the Rex computer[1] built in Des Moines Iowa. Nylac was founded by Gary Martin, although to customers and dealers NYLAC stood for "Now You've Looked At Computers" that was a bacronym. Actually the name of the company was derived from joining the two words Nyla (Gary's wife's name) and Univac an early computer.

Construction and technical specifications

The motherboard consisted of a Z-80 microprocessor running at 4mhz, an 8257/8275 memory mapped video controller address at 0xF800, and an 8251 serial controller for IO. There were six S-100 bus interfaces one of which was filled with a 514 inch disc controller card.

The cabinet was filled with a 13" CRT display, a liner power supply, two 514 inch floppy drives (later versions used dual headed drives). Toward the end of production, NYLACs were built with a 5 megabyte 514 inch hard drive to replace one of the floppies.

The Nylac Computer used the CP/M disk operating system.

References

  1. ^ a b Advert:Lifeboat Associates, Page 22, InfoWorld - 21 Jul 1980], Software for the most popular 8080/Z80* computer disk systems including: ...,REX, NYLAC...