Jump to content

Otori Dam

Coordinates: 37°12′53″N 139°12′50″E / 37.21472°N 139.21389°E / 37.21472; 139.21389
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 11:54, 23 September 2019 (top: Task 16: replaced (1×) / removed (0×) deprecated |dead-url= and |deadurl= with |url-status=;). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Otori Dam
The dam in 1976
Otori Dam is located in Japan
Otori Dam
Location of Otori Dam in Japan
CountryJapan
LocationTadami
Coordinates37°12′53″N 139°12′50″E / 37.21472°N 139.21389°E / 37.21472; 139.21389
StatusOperational
Construction began1961
Opening date1963
Owner(s)Electric Power Development Company
Dam and spillways
Type of damArch-gravity
ImpoundsTadami River
Height83 m (272 ft)
Length188 m (617 ft)
Reservoir
Total capacity15,800,000 m3 (12,809 acre⋅ft)
Active capacity5,000,000 m3 (4,054 acre⋅ft)
Catchment area656.9 km2 (254 sq mi)
Surface area89 ha (220 acres)[1]
Power Station
Commission date1963, 2003
Hydraulic headUnit 1: 50.8 m (167 ft)
Unit 2: 48.1 m (158 ft)
Turbines1 x 95 MW, 1 x 87 MW Kaplan-type
Installed capacity182 MW

The Otori Dam (大鳥ダム, Ōtori damu) is a concrete arch-gravity dam on the Tadami River, 17 km (11 mi) southwest of Tadami in Fukushima Prefecture, Japan. The primary purpose of the dam is hydroelectric power generation and it supports a 182 MW power station. The power station contains two Kaplan turbine-generators. Unit 1 (95 MW) was commissioned on 20 November 1963 while Unit 2 (87 MW) was commissioned on 7 June 2003 as part of a power plant expansion project that included an additional 200 MW generator at Okutadami Dam upstream. The dam is 83 m (272 ft) tall and 188 m (617 ft) long. Its reservoir has a 15,800,000 m3 (12,809 acre⋅ft) capacity of which 5,000,000 m3 (4,054 acre⋅ft) is active (or "useful") for power generation. The reservoir has a catchment area of 656.9 km2 (254 sq mi) and surface area of 89 ha (220 acres). Of the two generators, Unit 1 has a maximum effective hydraulic head of 50.8 m (167 ft) and Unit 2 is afforded 48.1 m (158 ft). The design flood discharge of the dam is 2,200 m3/s (77,692 cu ft/s) and its service spillway is controlled by three tainter gates.[2]

See also

References

  1. ^ "Otori Dam" (in Japanese). DamMania. Retrieved 15 August 2011.
  2. ^ "Case study 01-02: Biological Diversity - Okutadami and Ohtori Expansion Hydropower Project, Japan" (PDF). IEA Hydropower Implementing Agreement Annex VIII: Hydropower Good Practices: Environmental Mitigation Measures and Benefit. New Energy Foundation. 2006. Archived from the original (PDF) on 3 October 2011. Retrieved 14 August 2011.