Jump to content

Cisco 12000

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jason Quinn (talk | contribs) at 04:09, 22 October 2019 (source cleanup). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Performance Route Processor (PRP) is the core of a GSR.

The Cisco 12000, also known as a Gigabit Switch Router or GSR, is a series of large network routers designed and manufactured by Cisco Systems.[1]

IP Services Engine (ISE) with four Gigabit Ethernet SFPs.

Features

Cisco 12000 series routers feature a high-performance switched backplane providing 2.4Gbit/s across 16 switched ports simultaneously.[2] The Multi-Service Blade module (introduced for the XR 12000 line) provides firewall and acts as a session border controller.[3]

Criticism

Certain line cards in Cisco 12000 routers are potentially vulnerable to denial-of-service attacks.[4] Additionally, certain software versions were vulnerable to specially crafted IPv4 packets.[5]

See also

References

  1. ^ Gredler, Hannes; Goralski, Walter (2005). The Complete Isis Routing Protocol. Springer. ISBN 9781846281051.
  2. ^ "Fast Switched Backplane for a Gigabit Switched Router" (PDF). Department of Electrical Engineering, Stanford University. Retrieved January 19, 2013.
  3. ^ Duffy, Jim (March 19, 2007). "Cisco adds firewall, SBC module to XR 12000 line". Network World. Archived from the original on December 3, 2008. Retrieved January 19, 2013.
  4. ^ Leyden, John (15 November 2001). "Cisco high-end routers in DoS peril". The Register. Retrieved January 19, 2013.
  5. ^ Berndtson, Chad (May 27, 2011). "Cisco Warns Of Vulnerabilities In IOS XR Software". CRN. Retrieved January 19, 2013.