Wetted perimeter

The wetted perimeter is the perimeter of the cross sectional area that is "wet".^[1] The term wetted perimeter is common in civil engineering, environmental engineering, hydrology, geomorphology, and heat transfer applications; it is associated with the hydraulic diameter or hydraulic radius. Engineers commonly cite the cross sectional area of a river.

The wetted perimeter can be defined mathematically as

P=\sum _{i=0}^{\infty }{l_{i}}

where l_i is the length of each surface in contact with the aqueous body.

In open channel flow, the wetted perimeter is defined as the surface of the channel bottom and sides in direct contact with the aqueous body. Friction losses typically increase with an increasing wetted perimeter, resulting in a decrease in head.^[1] In a practical experiment, one is able to measure the wetted perimeter with a tape measure weighted down to the river bed to get a more accurate measurement.

When a channel is much wider than it is deep, the wetted perimeter approximates the channel width.^[1]

References

^ ^a ^b ^c Knighton, David (1998). Fluvial forms and processes: a new perspective (2nd ed.). Routledge. ISBN 978-0340663134.

This engineering-related article is a stub. You can help Wikipedia by expanding it.

[Knighton-1] Knighton, David (1998). Fluvial forms and processes: a new perspective (2nd ed.). Routledge. ISBN 978-0340663134.

[1]

See also

References