Trionic
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
Trionic is an innovative engine management system developed by Saab Automobile, consisting of an engine control unit (ECU) that controls 3 engine aspects:
- Ignition timing,
- Fuel injection
- Acts as a boost controller.
Hence the numerical prefix 'tri-' in Trionic. 'Ion' comes from the fact that it uses ion current measured by the spark plugs between combustion events as a sensor for knock, misfire and synchronization detection. With the ion sensing system, the ion current stream developed due to combustion can be deduced by monitoring the secondary current of the ignition coil. Using the value and wave shape of the current, after the actual spark event, the quality of the actual combustion process is determined, thus allowing the engine control unit to optimize the timing of the spark for the best engine performance while keeping emissions low on a much wider range of rpms.
Since Trionic 7, the throttle and thereby the air charge is electronically controlled, but the name "Trionic" was not changed accordingly.
History
The SAAB Trionic engine management system was developed for the 9000 and 'New Generation' 900 turbocharged engines. The engine management system was first utilized on the Saab B204 and B234 "H" engines to monitor and control the fuel injection system and turbocharging pressure control.
The Trionic 5.2 and 5.5 systems utilized the manifold absolute pressure MAP sensor and the intake air charge temperature sensor to calculate the fuel injection curves, while the Trionic 7 and 8 systems are mass air flow type. The two have substantial differences that prevent utilization of components between the two. Generally speaking, engine tuners prefer the easier to work with Trionic 5 systems over the Trionic 7 and 8 which are more restrictive in what can be manipulated in the software.
The intellectual rights to the Trionic 5 and 7 systems were sold to BAIC, along with the Saab H Engine that it was designed for, in 2009 as part of Saab's restructuring and transfer of ownership from General Motors to Spyker.
Models and ECU information
Trionic T5.2 | Trionic T5.5 | Trionic 7 | Trionic 8 | |
---|---|---|---|---|
Released | 1993 | 1994 | 1998 | 2003 |
Processor | MC 68332 | MC 68332 | MC YQQCU | MC 68377 |
User ROM | 128 kB | 256 kB | 512 kB | 2048 kB |
Features | TCS/ETC Optional | TCS/ETC Optional /intake heatplate Optional | 98-99 Does not use TCS on four cylinder models,
optional on 00-02 four cylinder models |
?? |
Generally speaking, Trionic systems are shortened to indicate which version they are, e.g. T5, T7, T8, etc. The engines with T5 had red direct ignition modules which differentiate them visually from the T7 models which had a black ignition module. The ignition module on both T5 and T7 are an integral ignition coil and electronics that plugs directly onto the spark plugs without the use of spark plug wires that are typically used on most engines.
SAAB Models Utilizing Trionic Engine Management System:
- 2nd Generation 900 ("NG900") 1994-1998 - T5
- 9000 1994-1998 - T5
- 1st Generation 9-3 1998 - T5 (Except Viggen, which is T7)
- 1st Generation 9-3 2000 to 2002 - T7
- 1st Generation 9-5 1998-2010 4Cyl - T7
- 2nd Generation 9-3 2003 to 2011 4cyl - T8
Projects/Aftermarket (Non OEM) tuning
Many people around the world are working on reverse engineering the Trionic engine management system, by way of various open source communities. The work involves understanding the binary files stored in the ECU itself, and what changes affect the car's hardware and operation of the vehicle. The T5, T7 and T8 management systems have been successfully manipulated to allow self-tuning for enthusiasts.
There also some alternative options in the way of interceptors like # Unichip that clamp the various inputs to the standard management systems, but they are restricted by the fact that fuel delivery generally cannot be easily increased as manipulation of the air-flow meter input and/or aggressive modifying of the ignition timing causes the Check Engine Light (CEL) to illuminate easily due to a deviation between the expected and targeted torque and quality of emissions. It is therefore common to increase the fuel pressure across the board by using an aftermarket fuel pressure regulator when tuning is performed by these interceptor computers, and trim the fuel out instead. However, increased fuel pressure has the side-effect of affecting the engine's ability to idle due to injector lockup, and as such sometimes an alternative solution of additional injectors instead of a raised-fuel-pressure regulator is proposed. The number of cars with such complex requirements is very low, and in general a full aftermarket engine management system is used in these cases, such as Nira or MoTeC.
Glossary
Sources include: Engine management system SAAB Trionic T5.5[1]
- APC, Automatic Performance Control
- CDM, Combustion Detection Module
- ECU, Engine control unit
- EGT, Exhaust gas temperature
- ETC, Electronic throttle control
- MAP, Manifold Absolute Pressure
- MIU, Main Instrument Unit
- ORVR, On board Refuelling Vapour Recovery system
- PWM, Pulse width modulation
- SID, Saab Information Display
- TCS, Traction control system
- TPS, Throttle position sensor
- TWICE, Theft Warning Integrated Central Electronics
- VSS, Vehicle Speed Sensor
- WOT, Wide Open Throttle
References
External links
- ecuproject.com at the Wayback Machine (archived 25 February 2019), formerly a Community dedicated to giving Trionic power to the people! This site is no longer online. Founded by Andrew J. Weaver and Steven A. Hayes and supported by the global SAAB community.
- trionictuning.com, community driven exploration and development of new Trionic features, supported by the global SAAB community.