Jump to content

South Australian Railways V class

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by NearEMPTiness (talk | contribs) at 10:03, 27 March 2020 (Literature). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

South Australian Railways V class
Preserved V9 at Naracoorte
Type and origin
Power typeSteam
BuilderBeyer, Peacock & Co
James Martin & Co
Serial number1597-1599, 1619, 67-70
Build date1876, 1893
Total produced8
Specifications
Configuration:
 • Whyte0-4-4
Gauge1,067 mm (3 ft 6 in)
Length21 ft 3.75 in (6.50 m)
Height9 ft 6 in (2.9 m)
Loco weight12 long tons 11 cwt (28,100 lb or 12.8 t)
Fuel typeCoal
Fuel capacitylong tons 12 cwt (1,300 lb or 0.6 t)
Water cap.300 imperial gallons (1,400 L; 360 US gal)
Boiler pressure130 psi (896 kPa)
Heating surface:
 • Firebox25.6 sq ft (2.38 m2)
 • Tubes231.3 sq ft (21.49 m2)
 • Total surface256.9 sq ft (23.87 m2)
Cylinders2
Cylinder size9.5 in × 15 in (241 mm × 381 mm)
Performance figures
Tractive effort3,910 lbf (17.39 kN)
Career
OperatorsSouth Australian Railways
ClassV
NumbersV9-V12, V143-V146
PreservedV9
Disposition1 preserved, 7 scrapped

The South Australian Railways V class was a class of 0-4-4 steam locomotives operated by the South Australian Railways.

History

In November 1876 the South Australian Railways took delivery of four 0-4-4 locomotives from Beyer, Peacock & Co, Manchester for use on the lightly laid Kingston-Naracoorte railway line. After final assembly was completed in South Australia, all entered service between January and May 1877. They were built to the same design as the Norwegian State Railways V1 class.[1]

They were not a success being too light and having insufficient water capacity for the 84 kilometre journey, requiring a water gin to be attached. In 1879, two W class locomotives were transferred with V9 becoming the shunter at Kingston wharf and the other three stored.[1]

In 1882, V12 was returned to service at Port Germein before moving to Port Pirie, while in the same year V10 was transferred to Port Wakefield, the latter was joined by V11 in 1885. In 1888, V9 moved to Port Augusta. From November 1891 until May 1893, V11 was loaned to BHP to operate on its lightly laid Broken Hill network. All four were rebuilt between 1891 and 1896. Between September and December 1893, a further four were delivered from James Martin & Co.[1]

They operated at various locations including Peterborough, Port Lincoln, Terowie and Wallaroo. Some were loaned interstate during the construction of the Yallourn Power Station. Most were withdrawn in the 1930s and 1940s with V9 plinthed at Pioneer Park, Naracoorte.[1]

Class list

Number Builder Builder's
number
In service Notes
V9 Beyer, Peacock & Co 1597 February 1877 preserved at Pioneer Park, Naracoorte
V10 Beyer, Peacock & Co 1598 February 1877
V11 Beyer, Peacock & Co 1599 January 1877
V12 Beyer, Peacock & Co 1619 May 1877
V143 James Martin & Co 67 September 1893
V144 James Martin & Co 68 October 1893
V145 James Martin & Co 69 November 1893
V146 James Martin & Co 70 December 1893

References

  1. ^ a b c d "Mechanical Horses: The V Class of the SAR" Australian Railway Historical Society Bulletin issue 755 September 2000 pages 332-337

Literature

Media related to South Australian Railways V class at Wikimedia Commons