Pentaerythritol tetraacrylate
Names | |
---|---|
IUPAC name
[3-prop-2-enoyloxy-2,2-bis(prop-2-enoyloxymethyl)propyl] prop-2-enoate
| |
Identifiers | |
3D model (JSmol)
|
|
ChEMBL | |
ChemSpider | |
ECHA InfoCard | 100.023.313 |
EC Number |
|
PubChem CID
|
|
UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
C17H20O8 | |
Molar mass | 352.339 g·mol−1 |
Hazards | |
GHS labelling: | |
Warning | |
H315, H317, H319 | |
P261, P264, P272, P280, P302+P352, P305+P351+P338, P321, P332+P313, P333+P313, P337+P313, P362, P363, P501 | |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
The chemical Pentaerythritol tetraacrylate (PETA or sometimes PETRA) is an organic compound. It is a tetrafunctional acrylate ester monomer used primarily in the manufacture of polymers[1]. It has the CAS Registry Number 4986-89-4[2].
Uses
PETA is part of a family of acrylates used in epoxy resin chemistry and Ultraviolet cure of coatings. Similar monomers used are 1,6-Hexanediol diacrylate and TMPTA trimethylol propane triacrylate. It is a derivative of pentaerythritol[3] One of the key uses of the material is in polymeric synthesis where it can form micelles and block copolymers[4]. As the molecule has 4 acrylate groups that functionality enables the molecule to do the Michael reaction with amines. It is therefore sometimes use in epoxy chemistry enabling a large reduction in cure time[5]. It is available ethoxylated where it also finds use in electron beam curing[6]. The material also has pharmaceutical uses[7]
References
- ^ "Pentaerythritol tetraacrylate". webbook.nist.gov. Retrieved 2020-03-17.
- ^ PubChem. "Pentaerythritol tetraacrylate". pubchem.ncbi.nlm.nih.gov. Retrieved 2020-03-17.
- ^ Marrian, S. F. (1948-08-01). "The Chemical Reactions of Pentaerythritol and its Derivatives". Chemical Reviews. 43 (1): 149–202. doi:10.1021/cr60134a004. ISSN 0009-2665.
- ^ Petrov, Petar; Bozukov, Metodi; Burkhardt, Markus; Muthukrishnan, Sharmila; Müller, Axel H. E.; Tsvetanov, Christo B. (2006-05-31). "Stabilization of polymeric micelles with a mixed poly(ethylene oxide)/poly(2-hydroxyethyl methacrylate) shell by formation of poly(pentaerythritol tetraacrylate) nanonetworks within the micelles". Journal of Materials Chemistry. 16 (22): 2192–2199. doi:10.1039/B517028A. ISSN 1364-5501.
- ^ "Epoxy Polyacrylate Resins". www.hexion.com. Retrieved 2020-03-17.
- ^ Chowdhury, Rajesh (2007). "Electron-beam-induced crosslinking of natural rubber/acrylonitrile–butadiene rubber latex blends in the presence of ethoxylated pentaerythritol tetraacrylate used as a crosslinking promoter". Journal of Applied Polymer Science. 103 (2): 1206–1214. doi:10.1002/app.25383. ISSN 1097-4628.
- ^ Wong, Rachel Shet Hui; Ashton, Mark; Dodou, Kalliopi (2016-10-01). "Analysis of residual crosslinking agent content in UV cross-linked poly(ethylene oxide) hydrogels for dermatological application by gas chromatography". Journal of Pharmaceutical Analysis. 6 (5): 307–312. doi:10.1016/j.jpha.2016.04.004. ISSN 2095-1779.