Jump to content

DMAX V6 engine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 178.78.102.5 (talk) at 23:52, 4 July 2020 (Added further turbocharger brand information depending on engine Euro emission compliance/engine model designation). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

DMAX V6 engine
Overview
ManufacturerIsuzu
Layout
ConfigurationV6
Displacement3.0 L; 180.5 cu in (2,958 cc)
Valvetrain4 valves x cyl.
Combustion
TurbochargerGarrett (Y30DT/P9X 701), Borg Warner (Z30DT/P9X 715) Variable-geometry with intercooler
Fuel systemDenso Common rail direct injection
Fuel typeDiesel
Cooling systemWater-cooled
Output
Power output168–185 hp (125–138 kW; 170–188 PS)
Torque output350–400 N⋅m (258–295 lb⋅ft)

The DMAX V6 engine is a 3.0 L; 180.5 cu in (2,958 cc) Diesel engine.

It was designed, and is produced by Isuzu in Fujisawa, Kanagawa, Japan but the design rights to the engine are now owned by General Motors. It uses high-pressure common rail direct injection with four valve per cylinder, cylinder heads. A variable-geometry turbocharger and intercooler are also used.

Output is nominally 125 kW (170 PS; 168 hp) at 4000 rpm and 350 N⋅m (258 lb⋅ft) at 1800 rpm. The engine's internal name is 6DE1.

Applications:

2001-2005 internal engine's name D308L 177 hp (132 kW).
2003-2005 internal engine's name Y30DT 177 hp (132 kW).
2005-2008 internal engine's name Z30DT 184 hp (137 kW).

Renault

2000-2010 internal engine's name P9X 701 177 hp (132 kW).
2005-2010 internal engine's name P9X 715 181 hp (135 kW).
2002-2006 internal engine's name P9X 701 177 hp (132 kW).
2006-2010 internal engine's name P9X 715 181 hp (135 kW).

See also