Jump to content

Dynamitron

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by LilHelpa (talk | contribs) at 20:45, 13 August 2020 (it's → its). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The Dynamitron is an electrostatic particle accelerator invented by Marshal Cleland in 1956 at Washington University and manufactured by IBA Industrial (formerly Radiation Dynamics).[1] [2][3] [4][5][6] It is similar to a Cockcroft-Walton accelerator, using a series capacitor-diode ladder network to generate a high DC voltage on an electrode, which accelerates particles through an evacuated beam tube between the electrode and a target at ground potential.[6] However instead of being powered at one end as in the CW, the capacitive ladder is charged in parallel electrostatically by a high frequency oscillating voltage applied between two long cylindrical electrodes on either side of the ladder column, which induce voltage in semicircular corona rings attached to each end of the diode rectifier tubes.[2] in combination with an inductor this structure forms a resonant tank circuit for the oscillator providing the voltage, at a frequency of 100 kHz. The alternating voltage across the diodes pumps charge in one direction up the series stack of diodes to the high voltage electrode as in the Cockcroft-Walton circuit. The advantage of this design is that it can produce higher beam currents than the Cockcroft-Walton design, up to hundreds of milliamperes, and the high frequency reduces the ripple on the accelerating voltage.[4] The accelerator stack is inside a tank of pressurized sulfur hexafluoride gas for insulation. It can accelerate either electrons or positive ions, and tandem versions have been built.

The Dynamitron is made in several models with output energies from 0.5 to 5 MeV and beam power from 50 to 200 kW.[2] Its main use is in industrial irradiation applications; the most common are polymer crosslinking for production of heat shrink tubing, and shrink wrap plastic film for food packaging, sterilization, and curing of plastic foam and tire components.[4] Around 200 units are in operation, primarily in the US.[7] A number have been installed in university research settings including the University of Birmingham in the UK and Tohoku University in Japan[8] A modern research application for Dynamitrons is as a high intensity neutron source. They are particularly suited for neutron production via the Lithium (p,n) reaction with potential applications in neutron imaging, activation analysis and Boron Neutron Capture Therapy.

References

  1. ^ Cleland, Marshal R., US Patent 2875394A, Voltage multiplication apparatus, filed: 29 October 1956, granted: 24 February 1959
  2. ^ a b c Nunan, Craig S. (26 May 1989). Present and Future Applications of Industrial Accelerators (PDF). Proceedings of the 9th Fermilab Industrial Affiliates Roundtable on Applications of Accelerators. Fermilab, Batavia, Illinois: Stanford Linear Accelerator Center. p. 64. Retrieved 30 July 2020.
  3. ^ McDonald, Kirk T. (19 February 2015). "A Dynamitron or Rhodotron for the JUNO Positron Calibration" (PDF). JUNO Positron Accelerator Workshop. Brookhaven National Laboratory. Retrieved 30 July 2020.
  4. ^ a b c Cottereau, E. "DC accelerators" (PDF). Tandetron. Retrieved 30 July 2020. {{cite journal}}: Cite journal requires |journal= (help), p.4
  5. ^ Galloway, R. A.; DeNeuter, S.; Lisanti, T. F.; Cleland, M. R. (2003). The New IBA Self-Shielded Dynamitron Accelerator for Industrial Applications. CP680, 17th International Conference on Application of Accelerators in Research and Industry. American Institute of Physics. pp. 977–980. ISBN 0-7354-0149-7. Retrieved 30 July 2020.
  6. ^ a b Wilson, Edmund; Wilson, Edward J. N.; Wilson, E. J. N. (2001). An Introduction to Particle Accelerators. Oxford University Press. p. 193. ISBN 9780198508298.
  7. ^ "Recent passing of Marshal Cleland". News. International Irradiation Association. May 2019. Retrieved 30 July 2020.
  8. ^ S. Matsuyama, K. Ishii, M. Fujisawa, Y. Kawamura, S. Tsuboi, K. Yamanaka, M. Watanabe, Y. Hashimoto, S. Ohkura, M. Fujikawa, T. Nagaya, K. Komatsu, H. Yamazaki, Y. Kikuchi, Upgrading of the 4.5 MV Dynamitron accelerator at Tohoku University for microbeam and nanobeam applications, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Volume 267, Issues 12–13, 15 June 2009, Pages 2060-2064