Jump to content

Brixia Model 35

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by D-Kuru (talk | contribs) at 19:16, 26 September 2020 (External links: + {{commonscat}}). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Brixia Model 35 Mortar
TypeInfantry mortar
Place of originKingdom of Italy
Service history
In service3 October 1935 – c. January 1950
Used byKingdom of Italy
WarsSecond Italo-Ethiopian War
spanish civil war
World War II
Production history
Designed1935
Produced1935
Specifications
Mass15.5 kg (34 lb)
Barrel length26 cm (10 in) L/5.4
Crew2[1]

Shell465 g (1 lb)
Caliber45 mm (1.8 in)
Elevation+10° to +90°
Traverse20°[1]
Rate of fire8-10 rpm[1]
Muzzle velocity83 m/s (270 ft/s)
Maximum firing range530 m (580 yd)[1]

The Brixia Model 35 was an Italian small-sized, rapid firing light mortar of World War II.

Description

Brixia light mortar in action.

The Brixia light mortar is a 45 mm calibre light mortar mounted on a legged base and designed for operation by two crew.[2] The rear legs are fitted with a pad for the gunner to lay forward on behind the mortar, or sit upon when the situation allowed. A lever allowed for operating the breech and firing the weapon, while ammunition was fed in by the loader. Well trained teams could reach up to 18 rounds per minute, although operational rate of fire was less intense to avoid damage to the firing tube. The Brixia mortar differed from comparable World War II weapons in that it was trigger fired with the help of separate ignition cartridges to be fed into a special magazine, making the weapon more similar to modern cannon-mortars than conventional parabolic grenade launchers of the time.[citation needed]

At tactical level, an infantry battalion had two platoons each of 9 Brixia mortars assigned.[3] Each Brixia mortar platoon was divided in three squads with three mortars each, which were distributed to the companies.[citation needed] The heavier 81mm mortar was assigned to the heavy weapons company of the regiment.[3]

The Brixia was a complicated weapon but could lay down very precise and intense curtains of fire. This was offset by the shells, which fragmented poorly and, due to the limited calibre, had a very light and low-yield warhead.[1] The weapon served on every front where Italian troops were involved (North Africa, Balkans, East Africa, Southern Russia, France) and was also employed during defence of the homeland against invading allied troops and during clashes between RSI formations and Italian partisans, on both sides, due to many Italian partisans having a former military background it was one of the few support weapons which could be found in the hands of the local Resistance.[citation needed] Mortars used by the German units fighting alongside the Italians were given the designation 4.5 cm GrW 176(i).[4]

Users

See also

References

  1. ^ a b c d e Chamberlain, Peter (1975). Mortars and rockets. Gander, Terry. New York: Arco Pub. Co. p. 11. ISBN 0668038179. OCLC 2067459.
  2. ^ Norris, John (11 December 2002). Infantry Mortars of World War II. New Vanguard 54. Osprey Publishing. pp. 34–35. ISBN 9781841764146. {{cite book}}: Invalid |ref=harv (help)
  3. ^ a b Athanassiou 2017, p. 34.
  4. ^ Bishop, Chris, ed. (2002). "45/5 modello 35 'Brixia'". The Encyclopedia of Weapons of World War II. Sterling Publishing Company. p. 196. ISBN 978-1-58663-762-0.
  5. ^ Athanassiou 2017, p. 19.
  6. ^ Vukšić, Velimir (July 2003). Tito's partisans 1941–45. Warrior 73. Osprey Publishing. p. 25. ISBN 978-1-84176-675-1.