Gym floor cover
 |
Gym floor covers can either be a carpet-based protection system or is a large plastic tarp, similar to a painters tarp, usually divided into equal sections 6 to 10 feet (1.8 to 3.0 m) wide each to cover up the entire gym floor. Gym floor covers are available in roll or tile systems. These covers are often used in large venues designed for athletic events when non-athletic events are being held there such as receptions, award ceremonies, indoor track meets, gymnastic events and graduations.
History
Gym floor covers are employed to prevent floor damage and improve safety, allowing for sports venues to be used for other purposes. Covers are used to prevent slip and fall accidents, while protecting underlying hardwood floors from foot traffic damage and heavy furniture scratches and dents. The newer carpet topcloth systems also improve acoustics in the gymnasium.
The first plastic tarp gym floor cover was invented and manufactured by Covermaster Inc. in 1969. In 2013, Protex Matting Inc. answered environmental concerns by introducing the newest 100% recycled polyester top cloth gym floor covers made completely from recycled plastic water bottles, reusing approximately 7000 water bottles for every 10,000 sq. ft produced [citation needed]. The best plastic tarp gym floor covers today are made of single-layer woven polyester and the newest polymer materials made via the knife-coating process, which enables dyes to be deposited deep into the core of the PVC material and prevent peeling of the layers - a side effect of extrusion coating or lamination process..
Modern gym floor covers are manufactured with a variety of colors, anti-slip surfaces, and weights ranging from 6 to 32 ounces per square yard (200 to 1,080 g/m2). Custom sizing is available with most products. The following technical characteristics are used to describe and classify the covers: filament size, weave count, total weight, core weight, tear strength, tensile strength, adhesion, coefficient of friction, slip resistance, hydrostatic resistance, fire resistance and others.
Usage
There are several common ways to install floor coverings. For the tarp method, each section is laid down to slightly overlap adjacent sections and then secured with special adhesive tape. This fastens the individual segments together into a cohesive unit. The carpet method, by contrast, affixes the segments to the floor via reusable velcro straps. Newer tile systems allow more flexibility in installation and do not require adhesive or velcro tape, but are much more labor intensive for larger floors.
Installing and deploying large covers can be a labor-intensive task. The most efficient way involves rolling and unrolling each section separately, and storing them on the gym floor cover storage system (rack) in a rolled up state to prevent creases and dust accumulation. Advances in the newer Protex GymPro products allow for smaller storage racks, while the newer tile systems are stacked on compact platform trucks for storage and transport. Dual cleaning brush assemblies (to remove debris) and electric power winders (to reduce manual labor during cover removal) are normally used to efficiently maintain the covers. Carpet based gym covers are best cleaned using more traditional carpet cleaning techniques.
Plastic tarp gym floor covers have a typical lifetime of 10–15 years. Carpet-based covers have a lifetime of 15–20+ years.