Jump to content

Mercedes-Benz M276 engine

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by WikiCleanerBot (talk | contribs) at 13:16, 14 December 2020 (v2.04b - Bot T20 CW#61 - Fix errors for CW project (Reference before punctuation)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Mercedes-Benz M276 DE35
Overview
ManufacturerMercedes-Benz
Production2010-2017;
Layout
ConfigurationNaturally aspirated 60° V6
Displacement3.5 L (3,498 cc)
Cylinder bore92.9 mm (3.66 in)
Piston stroke86 mm (3.39 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
ValvetrainDOHC with VVT
Combustion
Fuel systemDirect injected
Fuel typeGasoline
Oil systemWet sump
Cooling systemWater cooled
Output
Power output248–302 hp (185–225 kW; 251–306 PS)
Torque output340–370 N⋅m (251–273 lb⋅ft)
Chronology
PredecessorMercedes-Benz M272
SuccessorM276 DE30
Mercedes-Benz M276 DE30
Overview
ManufacturerDaimler AG
Production2013–
Layout
ConfigurationTurbo Charged 60° V6
Displacement3.0 L (2,996 cc)
Cylinder bore88 mm (3.46 in)
Piston stroke82.1 mm (3.23 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
ValvetrainDOHC with VVT
Combustion
TurbochargerTwin-turbo
Fuel systemDirect injected
Fuel typeGasoline
Output
Power output328–362 hp (245–270 kW; 333–367 PS)(DELA30-DE30AL)
Torque output480–521 N⋅m (354–384 lb⋅ft)(DELA30-DE30AL)
Chronology
PredecessorM276 DE35
SuccessorM276 DELA35(DE35AL)
Mercedes-Benz M276 DELA35(DE35AL)
Overview
ManufacturerDaimler AG
Production2014-2018;
Layout
ConfigurationTurbo Charged 60° V6
Displacement3.5 L (3,498 cc)
Cylinder bore92.9 mm (3.66 in)
Piston stroke86 mm (3.39 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
ValvetrainDOHC with VVT
Combustion
TurbochargerTwin-turbo
Fuel systemDirect injected
Fuel typeGasoline
Output
Power output328 hp (245 kW; 333 PS)
Torque output480 N⋅m (354 lb⋅ft)
Chronology
PredecessorM276 DELA30
SuccessorMercedes-Benz M256

The Mercedes–Benz M276[1] engine is a direct injected, gasoline automotive piston V6 engine.

The M276 engine is not related to the Chrysler Pentastar except for the 60 degree angle, as it was developed while Chrysler was still owned by Daimler AG. This can be seen in its 60 degree vee–angle, as opposed to the 90 degree angle of its M272 predecessor. The 60 degree vee–angle eliminates the need for a balance shaft, improving refinement while reducing mechanical complexity. None of the parts are shared at all.[1][2]

The M276 engine features an aluminum engine block with Nanoslide cylinder coating and dual overhead camshafts with independent variable valve timing on 12 intake and 12 exhaust valves and a new 2–stage timing chain arrangement. The M276 also includes direct injection with piezo–electrically controlled injectors for 2 to 3 sprays per intake stroke in normal operation,[3] multi–spark ignition that creates up to 4 sparks per cycle,[3] and the demand–controlled fuel pump, water pump, oil pump and alternator[3] that reduce parasitic loads.

The first spray of fuel injection creates the base lean burn mixture in the intake cycle, while the later spray(s), up to 4 more times in combustion cycle in difficult conditions for a clean burn, control when and where the ignition starts and how the burn propagates in stratified charge fashion.[3] In combination with a new smaller and more efficient Variable Valve Timing mechanism on all 4 camshafts, the precise combustion control allows a quicker and smoother re–start of the engine for the stop–start system. This VVT can alter cam timing up to 40 crank degrees with a higher speed than before, and enables limiting the intake charge combined with a normal combustion stroke, thus making the operating process an Atkinson Cycle in partial throttle conditions for better fuel efficiency.[4] These features are also shared with Mercedes' M278 V8 engine, announced at the same time.[1]

Mercedes–Benz claims that the new engine, in conjunction with the demand–controlled ancillaries and the stop–start system, can produce up to a 24% improvement in fuel economy while increasing power and torque over the M272.[3] This efficiency improvement led to the various models with this engine being labeled with Blue Efficiency moniker.

Retaining most of the above characteristics, turbocharged smaller displacement DELA 30 variant was introduced in 2013 for C400(W205) and subsequently offered on other models without the name Blue Efficiency.

For 2014 CLS400, a turbocharged larger displacement variant named DELA 35 came out to the market with lower boost of 0.7 bar (10 psi) compared to 1.8 bar (26 psi) of DELA30 resulting in the same power and torque ratings at a lower fuel consumption.[5]

In 2015, a higher boost and a slightly lower compression ratio (10.5:1) were used to create DE30AL version for AMG models, and is used for many AMG and Mercedes–Benz vehicles since.

DE 35

Three variants of the normally aspirated M276 DE 35 engine were produced in 2010–2017 with a displacement of 3.5 L (3,498 cc), bore and stroke of 92.9 mm × 86 mm (3.66 in × 3.39 in). Output of the first variant introduced on 2010 C350 CGI BlueEfficiency with 12.2:1 compression ratio is 215 kW (292 PS; 288 hp) at 6400 rpm with 365 N⋅m (269 lb⋅ft) of torque at 3000–5100 rpm.[6]

Output of the second variant with 12.2:1 compression ratio is 225 kW (306 PS; 302 hp) at 6500 rpm with 370 N⋅m (273 lb⋅ft) of torque at 3500–5250 rpm. S350, CLS350, ML350, E350 and W204 C350 models received this higher output version from 2011 to 2015.[4] S400h hybrid model used this engine from 2012 to 2017 in combination with an electric motor in between the engine and torque converter.

Detuned version of this engine was introduced on C300, and used also by E300 and S300 from model year 2013 to 2015, producing 248 hp (185 kW; 251 PS) and 251 lb⋅ft (340 N⋅m) of torque.[1]

Applications

DE 30 LA

With a reduced bore and stroke at 88 mm × 82.1 mm (3.46 in × 3.23 in) and reduced compression ratio at 10.7:1, DE 30 LA is turbocharged with twin IHI turbochargers for 245 kW (329 hp; 333 PS) at 5,250–6,000rpm and 480 N⋅m (354 lb⋅ft) of torque at 1,600–4,000rpm and weighs in at 179.2kg DIN.[7] This engine was introduced on 2014 C400(W205), and used for E400 Coupe 4Matic, ML(GLE)400 4Matic, E450 4Matic, CLS450, S450, S500e and other models.

For 2015–2016, a higher output version is also offered with 362 hp (270 kW; 367 PS) and 384 lb⋅ft (521 N⋅m) on higher boost and 10.5:1 compression ratio for C450 AMG and GLE450 AMG. This engine powers 2017–on AMG SLC43, AMG C43 and AMG GLE43,[8] as well as 2018–2020 E450 4Matic,[9] S560e[10] and other models.

Applications

DE 35 LA

The same bore and stroke of the normally aspirated DE 35 (92.9 mm × 86 mm (3.66 in × 3.39 in)) are used for this turbocharged version, with a lower boost level than the DE 30 LA on the same twin turbocharged format using a different model IHI turbocharger. While the power and torque remained the same, this larger displacement lower boost model yields a lower fuel consumption than M276 DE 30 LA.[5] Sometimes called DE 35 AL, this engine was offered on S400, CLS400, E400 4Matic (up to 2018), E450 and Maybach S400 4Matic models up to 2017.

Applications

References

  1. ^ a b c d Mercedes' New V Engine Family
  2. ^ [1]
  3. ^ a b c d e Mercedes-Benz New V6 and V8 Engines are More Powerful and More Efficient
  4. ^ a b Official: 2011 New V6 and V8 engine family From Mercedes Benz | Autoholiks Archived 2010-09-20 at the Wayback Machine
  5. ^ a b [2]
  6. ^ [3]
  7. ^ [4]
  8. ^ [5]
  9. ^ [6]
  10. ^ [7]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Mercedes-Benz_M276_engine&oldid=994175468"