Jump to content

Extent (file systems)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Monkbot (talk | contribs) at 11:53, 20 December 2020 (Task 18 (cosmetic): eval 3 templates: del empty params (1×); hyphenate params (3×);). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In computing an extent is a contiguous area of storage reserved for a file in a file system, represented as a range of block numbers, or tracks on Count key data devices. A file can consist of zero or more extents; one file fragment requires one extent. The direct benefit is in storing each range compactly as two numbers, instead of canonically storing every block number in the range.[1] Also, extent allocation results in less file fragmentation.

Extent-based file systems can also eliminate most of the metadata overhead of large files that would traditionally be taken up by the block-allocation tree. But because the savings are small compared to the amount of stored data (for all file sizes in general) but make up a large portion of the metadata (for large files), the overall benefits in storage efficiency and performance are slight.[2]

In order to resist fragmentation, several extent-based file systems do allocate-on-flush. Many modern fault-tolerant file systems also do copy-on-write, although that increases fragmentation. As a similar design, the CP/M file system uses extents as well, but those do not correspond to the definition given above. CP/M's extents appear contiguously as a single block in the combined directory/allocation table, and they do not necessarily correspond to a contiguous data area on disk.

IBM OS/360 and successors allocate files in multiples of disk tracks or cylinders. Files could originally have up to 16 extents, but this restriction has since been lifted. The initial allocation size and the size of additional extents to be allocated if required are specified by the user via Job Control Language. The system attempts to allocate the initial size as a contiguous area, although this may be split if contiguous space is not available.

Adoption

The systems supporting filesystem extents include the following:

See also

References

  1. ^ "Understanding Ext4 (part1): Extents". 2010-12-20. Retrieved 2015-02-02. What's really a departure for EXT4 however, is the use of extents rather than the old, inefficient indirect block mechanism used by earlier Unix file systems (e.g. EXT2 and EXT3) for tracking file content. Extents are similar to cluster runs in the NTFS file system; essentially, they specify an initial block address and the number of blocks that make up the extent. A file that is fragmented will have multiple extents, but EXT4 tries very hard to keep files contiguous.
  2. ^ "Ext4 Disk Layout". 2015-01-26. Retrieved 2015-02-02. If flex_bg is enabled, it is possible to allocate very large files with a single extent, at a considerable reduction in metadata block use, and some improvement in disk efficiency.
  3. ^ "Understanding Pages and Extents". Microsoft Developer Network. Retrieved 2014-08-14.
Look up extent in Wiktionary, the free dictionary.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Extent_(file_systems)&oldid=995320076"