Jump to content

POL valve

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by WikiCleanerBot (talk | contribs) at 09:55, 11 January 2021 (v2.04b - Bot T20 CW#61 - Fix errors for CW project (Reference before punctuation)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

POL valve on a 45 kg LPG cylinder
Male fitting to match POL valve

A POL valve (originally for Prest-O-Lite) is a gas connection fitting used on LPG cylinders.

The oldest standard for such connections, it was developed by the Prest-O-Lite company, hence the name.[1] It is still the most common such fitting in some countries such as Australia.[1] All 4.5 kg and 9 kg gas cylinders in Australia use a POL valve. There are an estimated 9 million 9 kg cylinders with the Type 21 (POL) valve and cylinder connection in circulation across Australia. In this market, the cylinders mostly supply gas to consumer owned barbecues and patio heaters.[2]

POL valves are legal and quite common in the United States, especially on larger containers, although certain uses (smaller portable containers) require a modified version of the POL valve that includes some safety features.

In making the connection, a male connector is screwed into the Type 21 valve. The first male connectors relied on a metal to metal connection (brass on brass) with sufficient pressure applied via a hexagon nut to achieve an effective seal. The hexagon nut required a spanner to achieve sufficient pressure to obtain a gas tight seal. The notched hexagon nut denotes it is a left-hand thread. Following international convention, the standard changed to allow the use of an integrated hand wheel, with leak tightness being provided by an o-ring or rubber bull nose.[2]

Thread Type

POL is the common name for the standard CGA 510 (US Compressed Gas Association connection number). The Thread specification is .885" – 14 NGO – LH – INT, meaning 0.885 in (22.5 mm) diameter thread, 14 threads per inch (1.814 mm pitch), National Gas Outlet form, left-hand internal thread.[3] This thread is also referred to as "Type 21" as per the Australian standard AS2473.2.[4] In summary, POL, CGA 510 and Type 21 all refer to the same specification.

See also

References

  1. ^ a b www.elgas.com
  2. ^ a b "Gas Energy Australia - LPG leisure cylinder safety review".{{cite web}}: CS1 maint: url-status (link)
  3. ^ "Rego Products Thread Specifications" (PDF).{{cite web}}: CS1 maint: url-status (link)
  4. ^ "Australian Standard AS2473.2 Cylinder Valve Connections" (PDF).{{cite web}}: CS1 maint: url-status (link)