Search results

bottom bracket, the spindle and crank arms are a single piece. The bottom bracket shell is large to accommodate removal of this S-shaped crank. Bearing cups...

A plain bearing, or more commonly sliding contact bearing and slide bearing (in railroading sometimes called a solid bearing, journal bearing, or friction...

A pillow block bearing (or plummer block) is a mounting used to support a rotating shaft with the use of bearings and various accessories. The assembly...

systems, the bracket may be in two parts, with the load-bearing horizontal support fitting into a wall-mounted slotted vertical metal strip. Brackets also are...

cable: see Cable Bottle cage: a holder for a water bottle Bottom bracket: The bearing system that the pedals (and cranks) rotate around. Contains a spindle...

balls recirculate inside the bearing's housing. Linear non-recirculating ball bearings have balls installed on a bracket and only move in one axis without...

Bucket seat Children and baby car seat Fastener Headrest Seat belt Seat bracket Seat cover Seat track Other seat components Back seat Front seat Anti-lock...

beak-like appearance. Similarly, the French refer to a bracket-corbel, usually a load-bearing internal feature, as a corbeau ("crow"). Norman (Romanesque)...

roller bearing between the axle hub and axle shaft ensures easy rotation of the non-drive wheels. On the axle side, it is mounted to the holding bracket from...

stator casing and diffuser are rigidly supported from the turbine end bearing bracket. Low conductivity demineralised water is circulated through the stator...

are prepared, under appropriate circumstances, to provide information bearing on the credibly [sic] and veracity of any such source. Irin Carmon quoting...

zero. For example, a bearing might be described as "(from) south, (turn) thirty degrees (toward the) east" (the words in brackets are usually omitted)...

in (3.91 m) diameter, 6 ft 7 in ( 2 m) high; four generator bottom bearing brackets, each 20 tons (20.3 tonne) gross, 12 ft (3.66 m) by 12 ft by 6 ft 1...

lit. 'cap [and] block') is a structural element of interlocking wooden brackets, important in traditional Chinese architecture for both its structural...

confragosa, commonly known as the thin walled maze polypore or the blushing bracket, is a species of polypore fungus in the family Polyporaceae. A plant pathogen...

period. In most cases, besides the projecting bracket above it, a bearing block supports another bracket set at 90° (see schematic photo below), extending...

bottom brackets. Note that ISIS Drive bottom brackets need a separate tool (see below). Various bottom bracket wrenches for newer bottom bracket styles...

several components which often include: A base jack or plate which is a load-bearing base for the scaffold. The standard, the upright component with connector...

the end of the downrod; this hemisphere rests in a ceiling-mounted metal bracket, or self-supporting canopy, and allows the fan to move freely (which is...

data were transmitted by rotating shafts. These were mounted in ball-bearing brackets fastened to the support plates. Most corners were at right angles,...