Search results

A chisel is a wedged hand tool with a characteristically shaped cutting edge on the end of its blade, for carving or cutting a hard material (e.g. wood...

one flat and the other, called the peen, rounded. It is distinguished from a cross-peen hammer, diagonal-peen hammer, point-peen hammer, or chisel-peen...

Rondel Chisel) Literally, "little fingernail" La Gradina – (Toothed Chisel or Claw) a chisel with multiple teeth- Lo Scalpello – a flat chisel Lo Scapezzatore...

marks from a smaller-toothed chisel, the dente di cane (dog's tooth). They found no evidence of Michelangelo using flat chisels in the work. A node of marble...

wedge-shaped chisel with a broad, flat edge. The pitching tool is useful for splitting the stone and removing large, unwanted chunks. Those two chisels are used...

splitting process. The droving chisel is used for the next stage, making the surface of the stone flat enough to use. The drove chisel is used for softer rocks...

front of the tooth row in both upper and lower jaws. They are normally flat, chisel-shaped teeth that meet in an edge-to-edge bite. Their function is cutting...

A corner chisel is a tool for cutting sharp internal corners in wood, often used for mortise joints or hinge rebates. The hole will typically be cut by...

stonemason's hammer, also known as a brick hammer, has one flat traditional face and a short or long chisel-shaped blade. It can thus be used to chip off edges...

pneumatic or electro-mechanical tool that combines a hammer directly with a chisel. It was invented by William McReavy, who then sold the patent to Charles...

is a large chisel, characterized by a wide (2-4 inches, 5–10 cm), heavy blade, and a long, frequently slender, socketed handle. A long, flat metal plate...

Chisel grind: As on a chisel, a single bevel-ground is only on one side, (ground often at an edge angle of about 20°–30°); the other remains flat. As...

crack when hammered. Chisels are of two types, hot and cold chisels. The cold chisel is used for cutting cold metals while the hot chisel is for hot metals...

to break apart its original shape with a pair of flat chisels, namely "deuk". The act of chiselling makes noise and attracts children to buy. Deuk Deuk...

used with a chisel. Geologist's hammers, as with most hammers, have two heads, one on either side. Most commonly, the tool consists of a flat square head...

short handled sledgehammer originally used for drilling in rock with a chisel. The name usually refers to a hammer with a 2-to-4-pound (0.91 to 1.81 kg)...

nails, and for use with a steel chisel when cutting stone or metal. In this last application, its weight drives the chisel more deeply into the material...

Indeed, three artifacts from the Stone Age have been found on Nukari; flat chisel, hammer ax and polished stone. During the Bronze Age the settlement disappeared...

has unfinished parts left close to smoothing, worked directly with a flat chisel, proving the virtuosity of the master in sculpting heads. Other points...

vertical regulator coulter (knife coulter pictured, but disk coulter common) chisel (foreshare) share (mainshare) mouldboard Other parts include the frog (or...