Search results

For bottom pour ladles, a stopper rod is inserted into a tapping hole in the bottom of the ladle. To pour metal the stopper is raised vertically to allow...

A stopper, bung, or cork is a cylindrical or conical closure used to seal a container, such as a bottle, tube, or barrel. Unlike a lid or bottle cap,...

A laboratory rubber stopper or a rubber bung or a rubber cork is mainly used in chemical laboratories in combination with flasks and test tube and also...

from the furnace to the atomiser. A stopper rod runs through the melt to the top of the pouring nozzle, the rod is withdrawn when the melt reaches the...

directly to the tip of the rod by using a cow hitch (aka: girth hitch) knot. The line at the rod's tip needs to have a stopper knot, which will hold the...

to the roof, technological track on the roof to move attendants, rear stopper rods pantographs fitted to three electrical insulators, locking the trolley...

flow of metal into the moulds can be controlled via three methods: By stopper rods that descend through the tundish, By slide gates at the top of the mould...

A glass stirring rod, glass rod, stirring rod or stir rod is a piece of laboratory equipment used to mix chemicals. They are usually made of solid glass...

have been known since antiquity, especially in floating devices and as stopper for beverages, mainly wine, whose market, from the early twentieth century...

liquids. Its mouth, at the bottling line, can be sealed with an internal stopper, an external bottle cap, a closure, or induction sealing. First attested...

laboratory rubber stopper, bung, or cap for capping the opening at the top of the neck. Such stoppers can be made of glass or plastic. Glass stoppers typically...

A doorstop (also door stopper, door stop or door wedge) is an object or device used to hold a door open or closed, or to prevent a door from opening too...

Rolling hitch – knot used to attach a rope to a rod, pole, or other rope Rose knot – decorative stopper knot Rosendahl bend (Zeppelin bend) – general purpose...

plastic snap/screw cap or fitted with a joint to accommodate a PTFE or glass stopper. The neck of volumetric flasks is elongated and narrow with an etched ring...

single direction of pull. A common usage while sailing is for rigging a stopper to relax the tension on a sheet so that a jammed winch or block can be...

approved the hotrod-inspired Plymouth Prowler as the company's follow-up show-stopper to the Dodge Viper. An early influence is credited to a Chrysler-sponsored...

houses a single iron rod. At the top, the iron rod is isolated from the copper by bitumen, with plugs or stoppers, and both rod and cylinder fit snugly...

2021. Archived from the original on 2021-08-16. Nordland, Rod (2017-08-29). "The Empire Stopper". The New York Times. Archived from the original on 2017-08-29...

plastic, borosilicate or related substances, and topped by special caps or stoppers. They are intended to contain chemicals in liquid or powder form for laboratories...

stopped the other end of the tube with a loose-fitting stopper attached to the end of a metal rod projecting into the tube, clamped at its center. When...